t_config_routing_protocols_ospf_config

Available Languages

Updated:January 22, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

OSPF Parameters

OSPF Parameters

On the Configuration > Routing Protocols > OSPF page, you can configure the Open Shortest Path First (OSPF) protocol, which is an Interior Gateway Protocol used to distribute routing information within a single Autonomous System.

  1. Click Add Route to add details of OSPF.

  2. Choose one of the options: Basic or Advanced.

  3. From the Router drop-down list, choose the OSPF version of the router.
  4. Enter the process ID and router ID.

  5. Select the VRF checkbox to enable VRF.

  6. Enter the network related details and click + to add the details.

  7. Click Save & Apply to Device.

Related Topics Link IconRelated Topics

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco