t_config_commands_set_time

Available Languages

Updated:January 22, 2019

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Setting Device Time

Setting Device Time

You can configure the time on the device manually so that all end points connected to the device can synchronize time, based on your device's time settings.

  1. Choose Administration > Time.
  2. Set the date and the time for your device.
  3. Choose a time zone. By default, Coordinated Universal Time (UTC) is chosen.
  4. Enter the hours and minutes by which the UTC time should be offset. A time offset indicates the time that is added to or subtracted from the UTC, to arrive at the current civil time.
  5. Click Apply.

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco