t_sec_aaa_config_advanced

Available Languages

Updated:March 31, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Advanced AAA Configuration

Advanced AAA Configuration

You can perform the following AAA configuration tasks from the Services > Security > AAA > AAA Advanced page:

ClosedCreate Users
  1. On the Services > Security > AAA > AAA Advanced > Users page, click Add.
  2. Enter a username for the user you want to add.
  3. Set the privilege level to specify the type of access for the user.
  4. Enter a password for the username, and confirm the password.
  5. From the Type drop-down field, choose a type to specify the profile of the user. If you create a network user, enter a description for the type. To enable guest network users, set the Guest User field to Enable. In the Lifetime field, set the lifetime for the user.
  6. Click Done and Apply.
ClosedConfigure RADIUS Fallback
  1. On the Services > Security > AAA > AAA Advanced > RADIUS Fallback page, enter the time after which the server should attempt retransmission, in the Retransmission Interval field.
  2. In the Timeout Interval field, enter the number of seconds between retransmissions. The valid range is between 1 and 1000 seconds.
  3. In the Dead-Time field, enter the amount of time, in minutes, after which a server is assumed to be dead.
  4. Click Apply.
ClosedCreate Attribute Lists
  1. On the Services > Security > AAA > AAA Advanced > Attribute Lists page, click Add.
  2. Enter a name for the attribute list.
  3. Choose a WLAN with which to associate the attribute list.
  4. Click Apply.
ClosedConfigure MAC Filtering
  1. On the Services > Security > AAA > AAA Advanced > MAC Filtering page, click Add.
  2. Enter the MAC address you want to use to
  3. Choose a WLAN to associate the attribute list with.
  4. Click Apply.
ClosedConfigure AP Policies
  1. On the Services > Security > AAA > AAA Advanced > AP Policies page, enter a name to for the attribute list.
  2. Choose a WLAN to associate the attribute list with.
  3. Click Apply.

 

Related Topics Link IconRelated Topics

 

 

 

© 2020 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco