t_config_wireless_plus_fabric

Available Languages

Updated:January 24, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Fabric Configuration

Fabric Configuration

Choose Configuration > Wireless > Fabric page to configure the following:

ClosedGeneral
  1. In the General tab, use the slider to enable Fabric Status for the controller.
  2. Click Add to add client AP VNID.
  3. In the Add Client and AP VNID window that is displayed, enter a name, L2 and L3 VNID details as required.
  4. Choose the control plane name from the drop-down list.
  5. Specify the IP address and network mask details as required.
  6. Click Apply to Device.
ClosedControl Plane
  1. In the Control Plane tab, click Add.
  2. In the Add Control Plane window, enter the name and description for the control plane.
  3. Click Add and specify the IP address and preshared key details. Also, specify the Password Type as Unencryted or AES.
  4. Click Save and Apply to Device.
ClosedProfiles
  1. In the Profiles tab, click Add to add a new Fabric profile.

  2. In the Add New Profile window that is displayed, enter a name and description for the profile.

  3. Specify the L2 VNID and SGT Tag details.
  4. Click Apply to Device.

 

Related Topics Link IconRelated Topics

 

© 2020 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco