t_config_vtp

Available Languages

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

VTP

Configuring VTP

Choose Configuration > Layer2 > VTP to configure the following:

  1. Enter a domain name and password.

  2. From the Version drop-down list, choose the version as V1, V2, or V3.

    • If you choose V1 orV2 as the version, use the drop-down to select the VLAN Mode.
    • If you choose V3 as the version, use the drop-down list to select the VLAN Mode and MST Mode. Use the slider to enable or disable Primary. If you enable Primary, you get to enable or disable the Force option.

  3. Click Apply to Device.

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco