The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
autonomic adjacency-discovery
no autonomic adjacency-discovery
Adjacency discovery is not enabled.
Interface configuration (config-if)
Release | Modification |
---|---|
|
This command was introduced. |
To enable adjacency discovery:
Device(config)# interface Tunnel100 Device(config-if)# autonomic adjacency-discovery
autonomic connect
no autonomic connect
Device is not connected to the domain.
Interface configuration (config-if)
Release | Modification |
---|---|
|
This command was introduced. |
You need to configure no switchport on the interface before configuring the autonomic connect command.
To connect a non autonomic device to autonomic domain :
Device > enable Device# configure terminal Device(config)# int gig 1/0/1 Device(config-if)# no switchport Device(config-if)# autonomic connect Device(config-if)# ipv6 address 5000::1/64
clear autonomic { device| neighbor neighbor's UDI| registrar accepted-device device UDI}
device |
Clears or resets device information. |
neighbor udi |
Clears or resets neighbor information. |
registrar accepted-device udi |
Clears public key stored for each enrolled device |
No default behavior or values.
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
The clear autonomic device command clears or resets all device-specific autonomic information, including the information obtained in the bootstrapping process. The clear autonomic neighbor command clears the neighbor-related information learned during the neighbor discovery. If no neighbor is specified, the command clears the entire neighbor database. The clear registrar accepted-device clears the public key stored for each device enrolled by the registrar.
To clear all device-specific autonomic information:
Device #clear autonomic device
% invoke syslog_an_delete_host: vrf cisco_autonomic
discriminator
Device#
Jul 15 05:55:53.987: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:55:53.988: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:55:53.990: %AN-6-ACP_DIKE_TO_NBR_REMOVED: Removed DIKE on ACP Tunnel100000 from Device (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:7) to Neighbor (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:5) connected on interface GigabitEthernet1/0/3
Jul 15 05:55:54.006: %AN-6-ACP_CHANNEL_TO_NBR_REMOVED: Removed ACP Tunnel100000 from Device (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:7) to Neighbor (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:5) connected on interface GigabitEthernet1/0/3
Jul 15 05:55:54.015: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:55:54.016: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback100000, changed state to down
Jul 15 05:55:54.097: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:55:54.104: %AN-5-NBR_LOST: Device with ACP (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:7) lost connectivity to its Neighbor (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:5) on interface GigabitEthernet1/0/3
Jul 15 05:55:54.113: %AN-5-CD_STATE_CHANGED: L2 Channel (0) Removed - Our Intf (GigabitEthernet1/0/3), Nbr UDI (PID:WS-C3850-24U SN:FCW1934D05Z), Nbr Intf (GigabitEthernet1/0/3)
Jul 15 05:55:56.004: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel100000, changed state to down
Jul 15 05:55:56.005: %LINK-5-CHANGED: Interface Tunnel100000, changed state to administratively down
Jul 15 05:56:04.128: %AN-6-UDI_AVAILABLE: UDI - PID:WS-C3650-24TD SN:FDO1942E1YK
Jul 15 05:56:36.306: %AN-5-CD_STATE_CHANGED: L2 Channel (0) Created - Our Intf (GigabitEthernet1/0/3), Nbr UDI (PID:WS-C3850-24U SN:FCW1934D05Z), Nbr Intf (GigabitEthernet1/0/3)
Jul 15 05:56:36.310: %LINK-3-UPDOWN: Interface ANI1, changed state to up
Jul 15 05:56:37.294: %LINEPROTO-5-UPDOWN: Line protocol on Interface ANI1, changed state to up
Jul 15 05:56:44.138: %AN-5-NBR_ADDED: Device with UDI (PID:WS-C3850-24U SN:FCW1934D05Z) is added as a Neighbor to Device with (Addr UNKNOWN) on the interface GigabitEthernet1/0/3
Jul 15 05:56:44.146: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:56:44.148: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:56:44.150: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:56:44.247: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:56:44.258: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:56:44.269: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:04.897: %CRYPTO-6-AUTOGEN: Generated new 3072 bit key pair
Jul 15 05:57:05.359: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:05.815: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:05.817: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:05.830: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:05.840: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:05.841: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.308: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:06.311: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.313: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.314: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.810: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.811: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:06.811: %AN-5-DEVICE_BOOTSTRAPPED_BY_ANR: Device with UDI (PID:WS-C3650-24TD SN:FDO1942E1YK) and (Addr FD08:2EEF:C2EE:0:E865:493B:ACFB:7) has been boot trapped by autonomic registrar, in autonomic domain cisco.com
Jul 15 05:57:06.815: %AN-6-ACP_VRF_GLOBAL_CREATE_SUCCESS: Device UDI (PID:WS-C3650-24TD SN:FDO1942E1YK) Autonomic VRF created globally vrf name cisco_autonomic, vrf id 3
Jul 15 05:57:06.823: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback100000, changed state to up
Jul 15 05:57:06.828: %AN-6-ACP_VRF_INTERFACE_CREATE_SUCCESS: Device UDI (PID:WS-C3650-24TD SN:FDO1942E1YK) Autonomic VRF created successfully on interface Loopback100000, vrf name cisco_autonomic, vrf id 3
Jul 15 05:57:06.837: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.840: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.842: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:06.842: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:07.905: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel100001, changed state to up
Jul 15 05:57:08.159: %CRYPTO-6-IKMP_NO_ID_CERT_ADDR_MATCH: (NOT ERROR BUT WARNING ONLY)ID of FE80::3A20:56FF:FEF3:7158 (type 5) and certificate addr with
Jul 15 05:57:08.160: %CRYPTO-6-IKMP_NO_ID_CERT_ADDR_MATCH: (NOT ERROR BUT WARNING ONLY)ID of FE80::3A20:56FF:FEF3:7158 (type 5) and certificate addr with
Jul 15 05:57:11.959: %SYS-5-CONFIG_I: Configured from console by console
Jul 15 05:57:11.960: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified. Issue "write memory" to save new IOS PKI configuration
Jul 15 05:57:11.963: %SYS-5-CONFIG_I: Configured from console by console
debug autonomic { Bootstrap | Channel-Discovery | Infra | Intent | Neighbor-Discovery | Registrar | Services } { aaa | all | database | events | ntp | packets } { info | moderate | severe }
no debug autonomic { Bootstrap | Channel-Discovery | Infra | Intent | Neighbor-Discovery | Registrar | Services } { aaa | all | database | events | ntp | packets } { info | moderate | severe }
bootstrap |
Enables debugging of bootstrapping information. |
Channel-Discovery |
Enables debugging of channel discovery information |
Infra |
Enables debugging of infra information. |
Intent |
Enables debugging of intent information. |
Neighbor-Discovery |
Enables debugging of neighbor information. |
Registrar |
Enables debugging of registrar information. |
Services |
Enables debugging of autonomic services information. |
aaa |
Enables debugging authentication, authorization, and accounting information. |
all |
Enables all debugging. |
events |
Provides information about autonomic events. |
ntp |
Enables debugging of Network Time Protocol (NTP) information. |
packets |
Provides information about autonomic packets. |
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
Use this command to debug the autonomic networking information.
show autonomic control-plane [ detail ]
detail |
(Optional) Displays detailed information. |
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
To display information about the autonomic control plane:
Device# show autonomic control-plane
VRF Name cisco_autonomic
Device Address FD08:2EEF:C2EE:0:E865:493B:ACFB:7
RPL floating-node, Dag-id = FD08:2EEF:C2EE:0:E865:493B:ACFB:5
Neighbor ACP Channel ACP Security
--------------------------------------------------------------------------------
PID:WS-C3850-24U SN:FCW1934D05Z Tunnel100002 DIKE
To display information about the autonomic control plane in detail:
Device# show autonomic control-plane detail
VRF Name cisco_autonomic
Device Address FD08:2EEF:C2EE:0:E865:493B:ACFB:7
RPL grounded-node, Dag-id = FD08:2EEF:C2EE:0:E865:493B:ACFB:1
Neighbor: PID:WS-C3850-24U SN:FCW1934D05Z
Uptime(Created Time): 00:12:16 ( 2016-07-15 05:38:53 UTC)
Supported ACP Channel: IPv6 GRE Tunnel
Negotiated ACP Channel: IPv6 GRE Tunnel
Tunnel Name Tunnel100000
Tunnel Source Interface ANI1
Tunnel Source FE80::5AAC:78FF:FE09:F383
Tunnel Destination FE80::3A20:56FF:FEF3:7158
Supported ACP Security: IPSec, DIKE
Negotiated ACP Security: DIKE
The following table describes the significant fields shown in the display.
Field |
Description |
---|---|
VRF Name |
VPN routing and forwarding (VRF) name. |
Device Address |
IPv6 address. |
RPL |
RPL node details. |
Neighbor |
Unique Device Identifier (UDI) of the neighbor. |
Tunnel Name |
Tunnel name. |
Tunnel Source Interface |
IP address of the source tunnel interface. |
Tunnel Source |
IP address of the tunnel source. |
Tunnel Destination |
IP address of the destination. |
show autonomic device
This command has no arguments or keywords.
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
To display the autonomic device information:
Device# show autonomic device
Status Enabled
Type Autonomic Node
UDI PID:WS-C3650-24TD SN:FDO1942E1YK
Device ID e865.493b.acfb-7
Domain ID cisco.com
Domain Certificate (sub:) ou=cisco.com+serialNumber=PID:WS-C3650-24TD SN:FDO1942E1YK,cn=e865.493b.acfb-7
Certificate Serial Number 09
Device Address FD08:2EEF:C2EE:0:E865:493B:ACFB:7
Domain Cert is Valid
show autonomic interfaces
This command has no arguments or keywords.
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
To display information about the autonomic interfaces:
Device# show autonomic interfaces
Interface Channel Disc AD Enabled Intf Type
--------------------------------------------------------------------------------
GigabitEthernet0/0 None No L2 untagged If
GigabitEthernet1/0/1 None No L2 untagged If
GigabitEthernet1/0/2 None No L2 untagged If
GigabitEthernet1/0/3 Probing No L2 untagged If
GigabitEthernet1/0/4 None No L2 untagged If
GigabitEthernet1/0/5 None No L2 untagged If
GigabitEthernet1/0/6 None No L2 untagged If
GigabitEthernet1/0/7 None No L2 untagged If
GigabitEthernet1/0/8 None No L2 untagged If
GigabitEthernet1/0/9 None No L2 untagged If
GigabitEthernet1/0/10 None No L2 untagged If
GigabitEthernet1/0/11 None No L2 untagged If
GigabitEthernet1/0/12 None No L2 untagged If
GigabitEthernet1/0/13 None No L2 untagged If
GigabitEthernet1/0/14 None No L2 untagged If
GigabitEthernet1/0/15 None No L2 untagged If
GigabitEthernet1/0/16 None No L2 untagged If
GigabitEthernet1/0/17 None No L2 untagged If
GigabitEthernet1/0/18 None No L2 untagged If
GigabitEthernet1/0/19 None No L2 untagged If
GigabitEthernet1/0/20 None No L2 untagged If
GigabitEthernet1/0/21 None No L2 untagged If
GigabitEthernet1/0/22 None No L2 untagged If
GigabitEthernet1/0/23 None No L2 untagged If
GigabitEthernet1/0/24 None No L2 untagged If
GigabitEthernet1/1/1 None No L2 untagged If
GigabitEthernet1/1/2 None No L2 untagged If
TenGigabitEthernet1/1/3 None No L2 untagged If
TenGigabitEthernet1/1/4 None No L2 untagged If
Vlan1 None No Virtual If
ANI1 None Yes Virtual If
Loopback100000 None No Virtual If
Tunnel100002 None No Virtual If
The following table describes the significant fields shown in the display.
Field |
Description |
---|---|
Interface |
Interface name. |
Channel Disc |
Channel discovery. |
AD Enabled |
|
show autonomic intent
This command has no arguments or keywords.
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
Intent is automatically sent to all nodes in an autonomic domain. So, every node should show the same intent
To display information about the configured intent range:
Device# show autonomic intent
Intent File : Available
Version Num : 1443520505 (Parsed)
Version Time: 2015-09-29 09:55:05 UTC
Outer Vlans : 30-35,40,45
Outer Vlans count : 8
show autonomic l2-channels
This command has no arguments or keywords.
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
To display the results of Channel Discovery:
Device# show autonomic l2-channels
AN L2 Channel Discovery Info :
Nbr UDI Encap Our Intf State Retry
--------------------------------------------------------------------------------
PID:WS-C3850-24U SN:FCW1934D05Z 4018 Gi1/0/3 Active 1
To display more detailed information:
Device# show autonomic l2-channels detail
AN L2 Channel Discovery Info :
--------------------------------------------------------------------------------
Nbr UDI : PID:WS-C3850-24U SN:FCW1934D05Z
ANI Intf : ANI1
Encap : 0
Nbr Intf : GigabitEthernet1/0/3
Our Intf : GigabitEthernet1/0/3
Keepalives Missed : 0
Channel Status : Active
show autonomic service
This command has no arguments or keywords.
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
To display information about the services:
Device# show autonomic service
Service IP-Addr
Syslog 5000::100
AAA 5000::100
AAA Accounting Port 1813
AAA Authorization Port 1812
Autonomic registrar FD08:2EEF:C2EE:0:E865:493B:ACFB:1
ANR type IOS CA
Config Server Address 5000::100
Auto IP Server UNKNOWN
show autonomic neighbor [ detail ]
detail |
(Optional) Displays detailed information. |
Privileged EXEC (#)
Release | Modification |
---|---|
|
This command was introduced. |
The following is sample output from the show autonomic neighbor command:
Device# show autonomic neighbor
UDI Device-ID Domain Interface
--------------------------------------------------------------------------------
PID:WS-C3850-24U SN:FCW1934D05Z e865.493b.acfb-5 cisco.com ANI1
The following is sample output from the show autonomic neighbor detail command:
Device# show autonomic neighbor detail
UDI: "PID:WS-C3850-24U SN:FCW1934D05Z"
Device ID e865.493b.acfb-5
Domain ID cisco.com
Address FD08:2EEF:C2EE:0:E865:493B:ACFB:5
State Nbr inside the Domain
Credential Domain Cert
Credential Validation Passed
Last Validated Time 2016-07-15 05:48:37 UTC
Certificate Expiry Date 2017-07-15 05:30:39 UTC
Certificate Expire Countdown 31534693 (secs)
Number of Links connected 1
Link:
Local Interface: ANI2
Remote Interface: ANI2
IP Address: FE80::3A20:56FF:FEF3:7158
Uptime(Discovered Time): 00:14:21 ( 2016-07-15 05:38:05 UTC)
Last Refreshed time: 0 seconds ago
The following table describes the significant fields shown in the display.
Field |
Description |
---|---|
UDI |
Unique device identifier. |
Device Identifier |
Device name. |
Domain Identifier |
Domain name. |
State |
Information about whether the neighbor is inside or outside the domain. If a device is inside an autonomic domain, it must have a valid domain certificate. |
Credential |
Detection method. |
Credential Validation |
Detection validation. |
Number of Links connected |
Number of neighbors detected. |
Local Interface |
Interface from which the neighbor is connected. |
Remote Interface |
Interface to which the neighbor is connected. |
IP Address |
IPv6 address of the neighbor, |