-
null
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Note ● For complete syntax and usage information for the commands used in this chapter, see these publications:
http://www.cisco.com/en/US/products/ps11846/prod_command_reference_list.html
To block all traffic to or from a MAC address in a specified VLAN, perform this task:
|
|
---|---|
Router(config)# mac address-table static mac_address vlan vlan_ID drop |
Blocks all traffic to or from the configured MAC address in the specified VLAN. |
This example shows how to block all traffic to or from MAC address 0050.3e8d.6400 in VLAN 12:
http://www.cisco.com/en/US/products/hw/switches/ps708/tsd_products_support_series_home.html
Participate in the Technical Documentation Ideas forum