Skip to content
Skip to search
Skip to footer

Cisco Nexus Cloud Services Platform Installation Workflow, Release 4.2(1)SP1(6.2)

Available Languages

Updated:October 1, 2014

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco Nexus Cloud Services Platform Installation Workflow

The following installation workflow describes the information and actions that you must take in order to implement a functioning Cisco Nexus Cloud Services Platform.

1. Hardware Installation

Unpack Cisco Nexus CSP
Install Cisco Nexus CSP into rack
Connect power cable
Connect to upstream switches

For additional information, see the following document:

Cisco Nexus Cloud Services Platform Hardware Installation Guide

2. Connecting to CSP

Connect monitor and keyboard
Configure CIMC
Configure Serial over LAN access
Connect to Cisco Nexus CSP Host CLI

Configure Terminal Server access
Power on Cisco Nexus CSP
Connect to Cisco Nexus CSP Host CLI

For additional information, see the following document:

Cisco Nexus Cloud Services Platform Hardware Installation Guide

3. Information Gathering (for software installation)

Gather the following data:
- Administrator credentials
- HA Redundancy role
- Management IP
- Domain ID
- Network uplinks
- VLANs

For additional information, see the following document:

Cisco Nexus Cloud Services Platform Software Installation and Upgrade Guide, Release 4.2(1)SP1(6.2)

4. Software Installation

Connect to console
Verify CIMC version
Set up primary Cisco Nexus CSP
Set up secondary Cisco Nexus CSP
Connect to Host CLI

For additional information, see the following document:

Cisco Nexus Cloud Services Platform Software Installation and Upgrade Guide, Release 4.2(1)SP1(6.2)

5. Configuring CSP

Configure port channels for flexible network uplink
Set up remote management
Option 1: Migrate existing VSM from VM to Cisco Nexus CSP
Option 2: Create new Virtual Service Blade (VSB)

For additional information, see the following document:

Cisco Nexus Cloud Services Platform Software Configuration Guide, Release 4.2(1)SP1(6.2)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)

This Document Applies to These Products

Nexus 1100 Series Cloud Services Platforms