Contents
- Cisco Cloud Services Platform 2100 Release Notes
- Information About Cisco Cloud Services Platform 2100
- Supported Cisco Networking Services
- Deploying a Cisco VSM Service in an HA Pair on Cisco Nexus 1000V for VMware vSphere, Release 5.2(1)SV3(1.3) or Earlier Releases
- Limits and Restrictions
- Configuration Limits
- Restrictions
- Using the Bug Search Tool
- Open Bugs
- Related Documentation for Cisco Cloud Services Platform 2100
- Obtaining Documentation and Submitting a Service Request
First Published: September 10, 2015
Last Updated: May 24, 2016
Cisco Cloud Services Platform 2100 Release Notes
This document describes the features, limitations, and caveats for the Cisco Cloud Services Platform 2100, Release 1.0.
Information About Cisco Cloud Services Platform 2100
Cisco Cloud Services Platform 2100 (Cisco CSP 2100) is a software and hardware platform for data center network functions virtualization. This open kernel virtual machine (KVM) platform, with Red Hat Enterprise Linux (RHEL) 7.0 as the base operating system, is designed to host networking virtual services.
Cisco CSP 2100 also supports services from other third-party vendors, including application firewalls, application delivery controllers, and value-added mobility services. Cisco CSP 2100 provides REST APIs, a graphical user interface, and a command-line interface for creating and managing the virtual machine (VM) lifecycle.
Supported Cisco Networking Services
Cisco CSP 2100 supports the following Cisco networking services:
Cisco Virtual Supervisor Module (VSM) for Cisco Nexus 1000V Switch deployments (VMware vSphere, KVM, and Microsoft Hyper-V).
Cisco Virtual Security Gateway (VSG) for Cisco Nexus 1000V Switch deployments.
Cisco Cloud Services Router (CSR) 1000V Series.
Cisco Adaptive Security Virtual Appliance (ASAv), supports QCOW image only.
Cisco Prime Data Center Network Manager (DCNM).
Cisco Virtual Network Analysis Module (vNAM).
Deploying a Cisco VSM Service in an HA Pair on Cisco Nexus 1000V for VMware vSphere, Release 5.2(1)SV3(1.3) or Earlier Releases
ProcedureTo deploy a Cisco VSM service (VSM) in an HA pair on Cisco Nexus 1000V for VMware vSphere, Release 5.2(1)SV3(1.3) or earlier releases, complete the following steps:
Limits and Restrictions
Configuration Limits
Use the following configuration limits for the Cisco CSP 2100 server.
Component
Supported Limits
Number of services in a node with hyperthreading enabled
15
(Each service can have a maximum of 2 virtual CPUs + 4 GB RAM.)
Number of services in a node with hyperthreading disabled
7
(Each service can have a maximum of 2 virtual CPUs + 4 GB RAM.)
Total number of nodes in a cluster
5
Number of vNICs per service
10
Using the Bug Search Tool
Procedure
Step 1 Go to http://tools.cisco.com/bugsearch. Step 2 In the Log In screen, enter your registered Cisco.com username and password, and then click Log In. The Bug Search page opens.
Note If you do not have a Cisco.com username and password, you can register for them at http://tools.cisco.com/RPF/register/register.do. Step 3 To search for a specific bug, enter the bug ID in the Search For field and press Enter. Step 4 To search for bugs in a specific release: Step 5 To search for bugs in the current release:
Open Bugs
The following table lists the ID and description of open bugs that apply to Cisco CSP 2100, Release 1.0.
Bug ID
Description
CSP should return an error message if an invalid IP address is configured in the cluster.
For a running service, VLAN is not editable through the GUI.
A service is not cleared correctly if it is deleted during the create_in_progress event.
The OVA installation file does not show the questionnaire when used through the GUI.
Modifying the port channel deletes the vnet interfaces.
The GUI does not show the VLAN range set on the port channel.
Related Documentation for Cisco Cloud Services Platform 2100
This section lists the documents used with the Cisco Cloud Services Platform 2100 and available on Cisco.com at the following URL:
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.
Copyright © 2015-2016, Cisco Systems, Inc. All rights reserved.