Verify Status of Hardware Components
To verify the status of all the hardware components installed on the NCS 1001, perform the following procedure.
Before you begin
Ensure that all the required hardware components have been installed on the NCS 1001. For installation details, see Cisco Network Convergence System 1001 Hardware Installation Guide.
When you execute this command from the Cisco IOS XR EXEC mode, the status of the Cisco IOS XR is displayed.
Enters System Admin EXEC mode.
Displays information and status for each node in the system.
Verify that all components of the NCS 1001 are displayed in the result. The software state and the hardware state must be in the OPERATIONAL state. The various hardware and software states are:
show platform detail
Displays the hardware and software states, and other details of the node.
Displays the details of the physical entities of the NCS 1001 when you execute this command in the Cisco IOS XR EXEC mode.