PDF(427.6 KB) View with Adobe Reader on a variety of devices
ePub(481.7 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(219.4 KB) View on Kindle device or Kindle app on multiple devices
Updated:June 21, 2017
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Content Filtering Configuration on the RV315W VPN Router
Content filtering configuration allows an administrator to block unwanted websites. Content filtering can block access to websites based on URLs and keywords.
This article explains how to configure Content Filtering on the RV315W VPN Router.
Content Filtering Configuration
Step 1. Log in to the web configuration utility and choose Security > Content Filtering. The Content Filtering page opens:
The Content Filtering section allows the administrator to choose the parameters under which the host works in the network in term of access to the webpages.
Step 1. Click the radio button for the type of Filter Type that the hosts will use. There are two types of filters:
• Block list — Denies HTTP access to websites on the block list and allows HTTP access to other websites.
• Allow list — Allows HTTP access to websites on the allow list and blocks HTTP access to other websites.