Bonjour Configuration on the CVR100W VPN Router
Available Languages
Objective
Bonjour is a service advertisement and discovery protocol that enables the automatic discovery of computers, devices, and services on IP networks. These devices can be many different things such as computers, servers, and printers. On the CVR100W. Bonjour is a feature that allows network devices to automatically discover each other without the need to manually enter IP addresses or configure a DNS server.
This article explains how to configure Bonjour discovery on the CVR100W.
Applicable Device
• CVR100W
Software Version
• 1.0.0.19
Bonjour Configuration
Step 1. Log in to the web configuration utility and choose Administration > Bonjour. The Discovery - Bonjour page opens:
Step 2. Check the Enable check box in the Bonjour field to enable Bonjour on the device. Bonjour is enabled by default.
Step 3. Check the Enable Bonjour check box in the Bonjour Interface Control Table for the desired VLAN to enable Bonjour on that particular VLAN. This allows devices present on the VLAN to discover the Bonjour services available on the CVR100W router.
Step 4. Click Save to save your changes or click Cancel undo your changes.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)