Media Access Control (MAC) Address Clone on the CVR100W Wireless-N 300M Router

Available Languages

Download Options

  • PDF     (72.8 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (118.5 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (83.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:November 29, 2018
Document ID:SMB4342

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Media Access Control (MAC) Address Clone on the CVR100W Wireless-N 300M Router

Objective

A MAC address is a 12-digit hexadecimal code assigned to a unique piece of hardware for identification. ISPs register the MAC address of the router when the service is first installed. If you have registered a different MAC address previously, the clone feature allows you to link the registered MAC address to the CVR100W router. This avoids the need to contact the ISP to change the MAC address.

This article explains how to clone a MAC address on the CVR100W.

Applicable Device

• CVR100W

Software Version

• v1.0.1.19

MAC Address Clone

Step 1. Log in to the web configuration utility and choose Networking > MAC Address Clone. The MAC Address Clone page opens:

Step 2. Check the Enable check box to enable MAC Address Clone on the device.

Step 3. Select one of the two available methods by which the MAC Address Clone can be done:

• Manual — Enter the MAC address in the MAC Address field. This is the MAC Address you want to assign the device.

• Auto — Click Clone My PC's MAC to have the device use the same MAC address as the computer to which it is connected.

Step 4. Click Save in order to save the changes.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco