User Settings on the CVR100W VPN Router

Available Languages

Download Options

  • PDF     (99.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (138.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (83.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB4290

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

User Settings on the CVR100W VPN Router

Objective

User settings allows the user to change the username and password of the device. It is very important for the administrator to have a strong password to protect the device from being misused. Refer to the article Configure Password Complexity on the CVR100W VPN Router for details on password complexity. This article explains how to configure user settings on the CVR100W VPN router.

Applicable Device

• CVR100W

Software Version

• 1.0.1.19

User Account

Step 1. Log in to the web configuration utility and choose Administration > User. The User page opens:

Step 2. In the New Username field, enter the new username.

Step 3. In the Old Password field, enter the current password.

Step 4. In the New Password field, enter the new desired password.

Step 5. (Optional) To make the password entered unreadable, check the Hide Password check box.

Step 6. (Optional) To have no password for the device, check the Blank Password check box.

Note: The Password Strength Meter shows the strength of the new password.

Step 7. (Optional) To disable the password complexity requirement for the new password, check the Disable Password Strength Enforcement check box.

Note: For more information on password complexity refer to the article titled, Password Complexity Settings on the CRV100W VPN Router.

Step 8. Click Save.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco