Traffic Statistics on WAP121 and WAP321 Access Points

Objective

The Traffic Statistics page helps to view real-time information about the traffic statistics of data transmitted and received by the access point on the Ethernet interface, the virtual access points (VAP), and on any Wireless Distribution System (WDS) radio interface. The information provided is since the last reboot of WAP. The traffic statistics are used to troubleshoot the network and find the interfaces that transmit and receive data and the interfaces that cause errors during transmission or reception. 

This article provides information about the traffic statistics on the WAP121 and WAP321 access points. 

Applicable Devices

• WAP121
• WAP321

Software Version

• 1.0.3.4

Traffic Statistics

Step 1. Log in to the Access Point Configuration Utility and choose Status and Statistics > Traffic Statistics. The Traffic Statistics page opens:

The following information is available in the Transmit/Receive table:

• Network Interface — Displays the name of the Ethernet interface, the virtual access point (VAP) interface or the WDS interface.

• Total Packets — Displays the total number of packets sent or received by the access point on the corresponding network interface.

• Total Bytes — Displays the total number of bytes sent or received by the access point on the corresponding network interface.

• Total Dropped Packets — Displays the total number of packets sent or received by the access point that were dropped on the network interface.

• Total Dropped Bytes — Displays the total number of bytes sent or received by the access point that were dropped on the network interface.

• Errors — Displays the errors involved when data is sent or received by the access point.

Step 2. (Optional) For the current information, click Refresh.