Tidal Enterprise Scheduler: Change the Number of Days between Calendar Compiles

Available Languages

Download Options

PDF (5.4 KB)
View with Adobe Reader on a variety of devices

Updated:October 27, 2011

Document ID:113197

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Change Calendar Compiles

Related Information

Introduction

This document describes how to change the number of days between automatic Calendar Compiles. By default Calendars are compiled every 100 days.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

Tidal Enterprise Scheduler Master Build 5.3.1.286 or later

Components Used

The information in this document is based on the Tidal Enterprise Scheduler Master Build 5.3.1.286 or later.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Change Calendar Compiles

In order to change the internal default Calendar compile time, add a new row to the Admiral database table sysval to contain sysval_id 112 and set sysval_integer to value that indicates the number of days to wait between calendar compiles. In order to disable automatic Calendar compiles, set sysval_integer to -1.