Cisco Nexus 3432D-S Switch Data Sheet

Data Sheet

Available Languages

Download Options

  • PDF
    (548.2 KB)
    View with Adobe Reader on a variety of devices
Updated:April 22, 2021

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Available Languages

Download Options

  • PDF
    (548.2 KB)
    View with Adobe Reader on a variety of devices
Updated:April 22, 2021
 

 

Cisco Nexus 3400-S overview

The Cisco Nexus® 3400-S is the first 400G capable switch in the Nexus 3000 portfolio with 50 Gbps PAM4 Serial-Deserializers (SerDes), designed for data centers with industry-leading performance-per-watt power efficiency at low latency, offering leading analytics.

Main benefits of the Cisco Nexus 3400-S switches:

      With the 12.8-Tbps ASIC, the Cisco Nexus 3432D-S provides 32 ports of 400G, allowing customers to grow at scale with fewer numbers of switches in their fabric, simplifying management and reducing cost and number of hops.

      At 400G, the Cisco Nexus 3400-S offers the lowest latency in the industry at high power efficiency.

      Cisco Nexus 3400-S switches enable deep network analytics, offering per-flow monitoring, queue forensics, and drop-packet forensics to help monitor customer networks.

Related image, diagram or screenshot

Figure 1.       

Cisco Nexus 3432D-S switch

The Cisco Nexus 3432D-S (Figure 1) is a Quad Small Form-Factor Pluggable – Double Density (QSFP-DD) switch with 32 ports that are backward-compatible with QSFP+, QSFP28, and QSFP56.

The Cisco Nexus 3432D-S has the following hardware configuration:

      32 fixed 400-Gigabit Ethernet QSFP-DD ports with backward compatibility for QSFP56, QSFP28, and QSFP+

      Beacon LED

      Status LED

      Dual-redundant power supplies

      Redundant (5+1) fans

      Two 100/1000-Mbps SFP ports (in front ports 33 and 34)

      One RS-232 console port

      One RJ45 and one SFP management port

      One USB port

The Cisco Nexus 3432D-S supports both forward and reverse (port-side intake and port-side exhaust) airflow schemes with AC power inputs. Colored handles on each fan or power supply clearly indicate the airflow direction, as seen in Figures 2 and 3.

Related image, diagram or screenshot

Figure 2.       

Cisco Nexus 3432D-S with Blue Handles Indicating Port-Side Exhaust Airflow

Cisco NX-OS software overview

Cisco NX-OS is a data center-class operating system built with modularity, resiliency, and serviceability at its foundation. Cisco NX-OS helps ensure continuous availability and sets the standard for mission-critical data center environments. The self-healing and highly modular design of Cisco NX-OS makes zero-impact operations a reality and provides exceptional operational flexibility.

Focused on the requirements of the data center, Cisco NX-OS provides a robust and comprehensive feature set that meets the networking requirements of present and future data centers. With an XML interface and a Command-Line Interface (CLI) like that of Cisco IOS® Software, Cisco NX-OS provides state-of-the-art implementations of relevant networking standards as well as a variety of true data-center-class Cisco innovations.

The Cisco Nexus 3400-S provides:

Wire-rate layer 2 and 3 switching on all ports, with up to 25.6 Terabits per second (Tbps) with 7.2 Bpps at ingress and 10 Bpps at egress[2].

Robust programmability, with support for Cisco NX-API, Linux containers, XML, and JavaScript Object Notation (JSON) APIs, Python.

High performance and scalability, with a four-core CPU, 16 GB of DRAM, and 70 MB of dynamic buffer allocation, making the switch excellent for massively scalable data centers and big data applications.

Flexibility

      The Cisco Nexus 3432D-S supports break out for 2x200/50G, 4x100/50G/25G, and 8x50G, supporting up to 128 ports of 100G or up to 168 ports of 50G.

      Both fiber and copper cabling solutions are available for 10-, 25-, 40-, 50-, 100-, and 400-Gbps connectivity, including an Active Optical Cable (AOC) and a Direct-Attached Cable (DAC).

High availability

      Virtual Port Channel (vPC) technology provides layer 2 multipath through the elimination of Spanning Tree Protocol (STP). It also enables fully-utilized bisectional bandwidth and simplified layer 2 logical topologies without the need to change the existing management and deployment models.

      The 512-way[1] Equal-Cost Multipath (ECMP) routing enables the use of layer 3 fat-tree designs. This feature allows organizations to prevent network bottlenecks, increase resiliency, and add capacity with little network disruption.

      Advanced reboot capabilities include hot and cold patching2.

      The switch uses hot-swappable Power-Supply Units (PSUs) and fans.

Purpose-built Cisco NX-OS operating system with comprehensive, proven innovations

      Power-On Auto Provisioning (POAP) enables touchless bootup and configuration of the switch, drastically reducing provisioning time.

      Cisco Embedded Event Manager (EEM) and Python scripting enable automation and remote operations in the data center.

      Advanced buffer monitoring reports real-time buffer utilization per port and per queue, which allows organizations to monitor traffic bursts and application traffic patterns.

      Ethanalyzer is a built-in packet analyzer for monitoring and troubleshooting control-plane traffic and is based on the popular Wireshark open-source network protocol analyzer.

      Complete layer 3 routing protocol suites are supported, including Border Gateway Protocol (BGP), Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Routing Information Protocol Version 2 (RIPv2) and Intermediate System to Intermediate System (IS-IS).

Table 1.        Software licensing for the Cisco Nexus 3432D-S switch

Software package

Features supported

System default (no license required)

  Comprehensive layer 2 feature set: VLAN, IEEE 802.1Q trunking, Link Aggregation Control Protocol (LACP), Unidirectional Link Detection (UDLD; standard and aggressive), Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol (RSTP), and Spanning Tree Protocol guard
  Security: Authentication, Authorization, and Accounting (AAA), Access Control Lists (ACLs), storm control, and configurable Control-Plane Policing (CoPP)
  Management features: Cisco Data Center Network Manager (DCNM) support, Secure Shell Version 2 (SSHv2) access, Cisco Discovery Protocol, Simple Network Management Protocol (SNMP), syslog
  Monitoring features: Advanced buffer monitoring, Switched Port Analyzer (SPAN) and Encapsulated RSPAN (ERSPAN)

Base license

  Layer 3 IP routing: Inter-VLAN Routing (IVR), static routes, Routing Information Protocol Version 2 (RIPv2), ACLs, Open Shortest Path First Version 2 (OSPFv2; limited to 256 routes), Enhanced Interior Gateway Routing Protocol (EIGRP) stub, Hot Standby Router Protocol (HSRP), and Virtual Router Redundancy Protocol (VRRP)

Essential License
(N3K-ES-XF2)

  Advanced layer 3 IP routing: OSPFv2, EIGRP, Border Gateway Protocol (BGP), and Intermediate System to Intermediate System (IS-IS), and Virtual Routing and Forwarding Lite (VRF-Lite) and Telemetry Features: Buffer Drop Capture (BDC), High Delay Capture (HDC) and INT

Cisco Nexus Data Broker license (NDB-FX-SWT-K9)

  License for using the tap and SPAN aggregation functions with Cisco Nexus Data Broker; supported on Essential License

Product specifications

The following tables list the product specifications, software features, and management and standards support for the Cisco Nexus 3400-S platforms.

Table 2.        Product specifications

Specification

Cisco Nexus 3432D-S

Physical

  32 fixed 400-Gigabit-Ethernet QSFP-DD ports
  Beacon LED
  Status LED
  Dual-redundant power supplies
  Redundant (5+1) fans
  Two 100/1000Mbps SFP ports in front (ports 33 and 34)
  One RS-232 serial console port
  One RJ45 and one SFP management port
  One USB port

Performance

25.6 Tbps switching capacity

Typical operating power

626W

Maximum power

1240W

Typical heat dissipation

2136 BTU/hr

Maximum heat dissipation

4231 BTU/hr

Table 3.        Hardware specifications for Nexus 3400-S platforms

 

Mode

Normal mode

Hardware tables and scalability

Number of MAC addresses

120K

Number of IPv4/IPv6 unicast routes

440K / 360K

Number of IPv4/IPv6 hosts

192K / 96K

Number of IPv4 multicast routes

Up to 96K with 8K groups

Number of VLANS

4K

Number of ACL entries

3.5K ingress and 1.5K egress

Number of spanning-tree instances

Rapid Spanning Tree Protocol (RSTP): 123

Multiple Spanning Tree (MST) Protocol: 64

Number of EtherChannels

24

Number of ports per EtherChannel

24

Buffer size

70 MB

Boot flash memory

128 GB

Number of power supplies

2 (redundant)

Power supply types

AC (forward and reversed airflow)

Input voltage

100 to 240 VAC

Frequency

50 to 60 Hz

Power supply efficiency

89 to 91% at 220V

Cooling

Forward and reversed airflow schemes

  Forward airflow: Port-side intake (air enters through ports and exits through fan tray and power supplies)
  Reversed airflow: Port-side exhaust (air enters through fan tray and power supplies and exits through ports)

Six individual, hot-swappable fans (5+1 redundant)

Environment

Dimensions (height x width x depth)

1.75 x 17.29 x 25.4 in. (4.44 x 43.91 x 64.51cm)

Weight

30 pounds or 13.6 Kg

Operating temperature

32 to 104° F (0 to 40°C)

Storage temperature

-40 to 158° F (-40 to 70°C)

Relative humidity

5 to 95% non-condensing

Altitude (Operating)

Up to 13,123 ft.

Altitude (Non-Operating)

Up to 16,000 ft.

Transceiver and cabling options

The Cisco Nexus 3400-S are Quad Small Form factor pluggable – Double Density (QSFP-DD) platforms that support the full range of optical transceivers, starting from Active Optical Cables (AOC), Direct Attach Cables (DAC).

For details about the optical modules available and the minimum software release required for each supported optical module, visit here.

Table 4.        Software features common to Nexus 3000 series switches

Description

Specifications

Layer 2

  Layer 2 switch ports and VLAN trunks
  IEEE 802.1Q VLAN encapsulation
  Support for up to 4096 VLANs
  Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible)
  MSTP (IEEE 802.1s): 64 instances
  Spanning Tree PortFast
  Spanning Tree Root Guard
  Spanning Tree Bridge Assurance
  Cisco EtherChannel technology (up to 24 ports per EtherChannel)
  LACP: IEEE 802.3ad, IEEE 802.1ax
  Advanced PortChannel hashing based on layer 2, 3, and 4 information
  Jumbo frames on all ports (up to 9216 bytes)
  Link-level flow control (IEEE 802.3x)
  vPC

Layer 3

  Layer 3 interfaces: Routed ports on interfaces, Switch Virtual Interfaces (SVIs), PortChannels, and subinterfaces (total: 1024)
  64-way Equal-Cost Multipath (ECMP)
  4096 ACL entries
  Routing protocols: Static, RIPv2, EIGRP, OSPF, IS-IS, and BGP
  HSRP and VRRP
  ACL: Routed ACL with layer 3 and 4 options to match ingress and egress ACLs
  VRF: VRF-Lite (IP VPN), VRF-aware unicast (BGP, OSPF, and RIP), and VRF‑aware multicast
  VRF route leaking
  Jumbo frame support (up to 9216 bytes)

Security

  Ingress ACLs (standard and extended) on Ethernet
  Standard and extended layer 3 to 4 ACLs include IPv4, Internet Control Message Protocol (ICMP), Transmission Control Protocol (TCP), and User Datagram Protocol (UDP)
  VLAN-based ACLs (VACLs)
  Port-based ACLs (PACLs)
  ACLs on virtual terminals (VTYs)
  Dynamic Host Configuration Protocol (DHCP) relay
  Control Plane Policing (CoPP)

Cisco Nexus Data Broker

  Topology support for tap and SPAN aggregation
  Traffic load balancing to multiple monitoring tools
  Packet truncation
  Traffic filtering based on layer 1 through layer 4 header information
  Traffic replication and forwarding to multiple monitoring tools
  Robust Role-Based Access Control (RBAC)
  Northbound Representational State Transfer (REST) API for all programmability support

Management

  Power On Auto Provisioning (POAP)
  Python scripting
  Switch management using 10/100/1000-Mbps management or console ports
  CLI-based console to provide detailed out-of-band management
  In-band switch management
  Locator and beacon LEDs
  Configuration rollback
  SSHv2
  Telnet
  AAA
  AAA with RBAC
  RADIUS
  TACACS+
  Syslog
  Embedded packet analyzer
  SNMP v1, v2, and v3
  Enhanced SNMP MIB support
  XML (NETCONF) support
  Remote monitoring (RMON)
  Advanced Encryption Standard (AES) for management traffic
  Unified username and passwords across CLI and SNMP
  Microsoft Challenge Handshake Authentication Protocol (MS-CHAP)
  Digital certificates for management between switch and RADIUS server
  Cisco Discovery Protocol (CDP) Versions 1 and 2
  RBAC
  SPAN on physical, PortChannel, and VLAN
  ERSPAN Versions 2 and 3
  Ingress and egress packet counters per interface
  Network Time Protocol (NTP)
  Cisco Online Health Management System (OHMS)
  Comprehensive bootup diagnostic tests
  Cisco Data Center Network Manager (DCNM )
  Active buffer monitoring

Table 5.        Management and standards support

Description

Specification

MIB support

Generic MIBs

  SNMPv2-SMI
  CISCO-SMI
  SNMPv2-TM
  SNMPv2-TC
  IANA-ADDRESS-FAMILY-NUMBERS-MIB
  IANAifType-MIB
  IANAiprouteprotocol-MIB
  HCNUM-TC
  CISCO-TC
  SNMPv2-MIB
  SNMP-COMMUNITY-MIB
  SNMP-FRAMEWORK-MIB
  SNMP-NOTIFICATION-MIB
  SNMP-TARGET-MIB
  SNMP-USER-BASED-SM-MIB
  SNMP-VIEW-BASED-ACM-MIB
  CISCO-SNMP-VACM-EXT-MIB

Ethernet MIBs

  CISCO-VLAN-MEMBERSHIP-MIB

Configuration MIBs

  ENTITY-MIB
  IF-MIB
  CISCO-ENTITY-EXT-MIB
  CISCO-ENTITY-FRU-CONTROL-MIB
  CISCO-ENTITY-SENSOR-MIB
  CISCO-SYSTEM-MIB
  CISCO-SYSTEM-EXT-MIB
  CISCO-IP-IF-MIB
  CISCO-IF-EXTENSION-MIB
  CISCO-NTP-MIB
  CISCO-IMAGE-MIB
  CISCO-IMAGE-UPGRADE-MIB

Monitoring MIBs

  NOTIFICATION-LOG-MIB
  CISCO-SYSLOG-EXT-MIB
  CISCO-PROCESS-MIB
  RMON-MIB
  CISCO-RMON-CONFIG-MIB
  CISCO-HC-ALARM-MIB

Security MIBs

  CISCO-AAA-SERVER-MIB
  CISCO-AAA-SERVER-EXT-MIB
  CISCO-COMMON-ROLES-MIB
  CISCO-COMMON-MGMT-MIB
  CISCO-SECURE-SHELL-MIB

Miscellaneous MIBs

  CISCO-LICENSE-MGR-MIB
  CISCO-FEATURE-CONTROL-MIB
  CISCO-CDP-MIB
  CISCO-RF-MIB

Layer 3 and Routing MIBs

  UDP-MIB
  TCP-MIB
  OSPF-MIB
  OSPF-TRAP-MIB
  BGP4-MIB
  CISCO-HSRP-MIB

Standards

  IEEE 802.1D: Spanning Tree Protocol
  IEEE 802.1p: CoS Prioritization
  IEEE 802.1Q: VLAN Tagging
  IEEE 802.1s: Multiple VLAN Instances of Spanning Tree Protocol
  IEEE 802.1w: Rapid Reconfiguration of Spanning Tree Protocol
  IEEE 802.3z: Gigabit Ethernet
  IEEE 802.3ad: Link Aggregation Control Protocol (LACP)
  IEEE 802.1ax: Link Aggregation Control Protocol (LACP)
  IEEE 802.3ae: 10 Gigabit Ethernet
  IEEE 802.3ba: 40 Gigabit Ethernet
  IEEE 802.1ab: Link Layer Discovery Protocol (LLDP)

RFC

BGP

  RFC 1997: BGP Communities Attribute
  RFC 2385: Protection of BGP Sessions with the TCP MD5 Signature Option
  RFC 2439: BGP Route Flap Damping
  RFC 2519: A Framework for Inter-Domain Route Aggregation
  RFC 2545: Use of BGPv4 Multiprotocol Extensions
  RFC 2858: Multiprotocol Extensions for BGPv4
  RFC 3065: Autonomous System Confederations for BGP
  RFC 3392: Capabilities Advertisement with BGPv4
  RFC 4271: BGPv4
  RFC 4273: BGPv4 MIB: Definitions of Managed Objects for BGPv4
  RFC 4456: BGP Route Reflection
  RFC 4486: Subcodes for BGP Cease Notification Message
  RFC 4724: Graceful Restart Mechanism for BGP
  RFC 4893: BGP Support for Four-Octet AS Number Space

OSPF

  RFC 2328: OSPF Version 2
  8431RFC 3101: OSPF Not-So-Stubby-Area (NSSA) Option
  RFC 3137: OSPF Stub Router Advertisement
  RFC 3509: Alternative Implementations of OSPF Area Border Routers
  RFC 3623: Graceful OSPF Restart
  RFC 4750: OSPF Version 2 MIB

RIP

  RFC 1724: RIPv2 MIB Extension
  RFC 2082: RIPv2 MD5 Authentication
  RFC 2453: RIP Version 2
  IP Services
  RFC 768: User Datagram Protocol (UDP)
  RFC 783: Trivial File Transfer Protocol (TFTP)
  RFC 791: IP
  RFC 792: Internet Control Message Protocol (ICMP)
  RFC 793: TCP
  RFC 826: Address Resolution Protocol (ARP)
  RFC 854: Telnet
  RFC 959: FTP
  RFC 1027: Proxy ARP
  RFC 1305: Network Time Protocol (NTP) Version 3
  RFC 1519: Classless Interdomain Routing (CIDR)
  RFC 1542: BootP Relay
  RFC 1591: Domain Name System (DNS) Client
  RFC 1812: IPv4 Routers
  RFC 2131: DHCP Helper
  RFC 2338: VRRP

Regulatory standards compliance

The following table summarizes regulatory standards compliance for the Cisco Nexus 3000 Series.

Table 6.        Regulatory standards compliance: Safety and EMC

Specification

Description

Regulatory compliance

  Products should comply with CE Markings per directives 2004/108/EC and 2006/95/EC

Safety

  UL 60950-1 Second Edition
  CAN/CSA-C22.2 No. 60950-1 Second Edition
  EN 60950-1 Second Edition
  IEC 60950-1 Second Edition
  AS/NZS 60950-1
  GB4943

EMC: Emissions

  47CFR Part 15 (CFR 47) Class A
  AS/NZS CISPR22 Class A
  CISPR22 Class A
  EN55022 Class A
  ICES003 Class A
  VCCI Class A
  EN61000-3-2
  EN61000-3-3
  KN22 Class A
  CNS13438 Class A

EMC: Immunity

  EN55024
  CISPR24
  EN300386
  KN24

RoHS

RoHS 5 compliant except for lead press-fit connectors

Ordering information

The following table provides ordering information for Cisco Nexus 3432D-S Switch.

Table 7.        Ordering information

Part number

Description

Chassis

N3K-C3432D-S

Nexus 3432D-S switch with 32ports of QSFP-DD

NXA-FAN-35CFM-PE

Nexus Fan, Reverse airflow (port side exhaust)

NXA-FAN-35CFM-PI

Nexus Fan, Forward airflow (port side intake)

NXA-PAC-1500W-PE

Nexus 1500W AC Power Supply, Reverse airflow (port side exhaust)

NXA-PAC-1500W-PI

Nexus 1500W AC Power Supply, Forward airflow (port side intake)

Software Licenses

N3K-ES-XF2

Nexus 3432D-S Essential License including Layer-3 LAN Enterprise and Telemetry features

Spares

NXA-FAN-35CFM-PE=

Nexus Fan, Reverse airflow (port side exhaust) spare

NXA-FAN-35CFM-PI=

Nexus Fan, Forward airflow (port side intake) spare

NXA-PAC-1500W-PE=

Nexus 1500W AC Power Supply, Reverse airflow (port side exhaust) spare

NXA-PAC-1500W-PI=

Nexus 1500W AC Power Supply, Forward airflow (port side intake) spare

Warranty

The Cisco Nexus 3000 Series Switches have a 1-year limited hardware warranty. The warranty includes hardware replacement with a 10-day turnaround from receipt of a Return Materials Authorization (RMA).

Service and support

Cisco offers a wide range of services to help accelerate your success in deploying and optimizing the Cisco Nexus 3000 Series in your data center. The innovative Cisco Services offerings are delivered through a unique combination of people, processes, tools, and partners and are focused on helping you increase operational efficiency and improve your data center network. Cisco Advanced Services uses an architecture-led approach to help you align your data center infrastructure with your business goals and achieve long-term value. Cisco Smart Net Total Care® Service helps you resolve mission-critical problems with direct access at any time to Cisco network experts and award-winning resources. With this service, you can take advantage of the Cisco Smart Call Home service capability, which offers proactive diagnostics and real-time alerts on your Cisco Nexus 3000 Series Switches. Spanning the entire network lifecycle, Cisco Services helps increase investment protection, optimize network operations, support migration operations, and strengthen your IT expertise.

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.

For more information

For more information, visit https://www.cisco.com/go/nexus3000. For information about Cisco Nexus Data Broker, visit https://www.cisco.com/go/nexusdatabroker.

 

 

[2] Wire rate on all ports for packets greater than 200 bytes

 

 

 



[1] Refer to verified scalability guide for latest software support

Learn more