EOL for Cisco ONS 15454 Configured-Bay Assemblies, Ver 4SA-1BNC

Available Languages

Download Options

PDF (145.8 KB)
View with Adobe Reader on a variety of devices

Updated:July 27, 2004

Document ID:1518700966204947

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

product bulletin no. 2560

Cisco Systems^® announces the end-of-sale and end-of-life dates for the Cisco^® ONS 15454 configured-bay assemblies with part numbers 15454-4SA-1BNC1 and 15454-0SA. The last day to order these Cisco ONS 15454 configured-bay assemblies is April 2, 2004. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) until April 2, 2009. Table 1 describes the end-of-life milestones, definitions, and dates and Table 2 lists the product part numbers for the products affected by this announcement.

Customers are encouraged to migrate to the Cisco ONS 15454 configured-bay assemblies with part numbers 15454-4SA-1BNC-FL and 15454‑0SA-FL, which provide an enhanced fuse and alarm panel with integrated low-voltage disconnect.

Table 3 provides relevant information for migrating from the end-of-life to the replacement configured-bay assemblies.

Table 1. End-of-Life Milestones and Dates for the Cisco ONS 15454 Configured-Bay Assemblies Part Numbers 4SA-1BNC1 and 0SA

Milestone	Definition	Date
End-of-sale date	The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.	April 2, 2004
End of routine failure analysis date	The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.	April 2, 2005
End of new service attachment date	For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.	April 2, 2005
End of service contract renewal date	The last date to extend or renew a service contract for the product. The extension or renewal period cannot extend beyond the last date of support.	January 2, 2009
Last date of support	The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.	April 2, 2009

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number	Product Description
15454-4SA-1BNC1=	Cisco ONS 15454 4-ANSI shelf bay assembly, 4 BNCA48, 0 fan trays
15454-0SA=	Cisco ONS 15454 0-shelf bay assembly

proDuct migration options

The recommended replacement for the Cisco ONS 15454 configured-bay assemblies with part numbers 4SA-1BNC1 and 0SA is the Cisco ONS 15454 configured-bay assemblies with part numbers 4SA-1BNC-FL and 0SA-FL (Table 3). The replacements provide an enhanced fuse and alarm panel with integrated low-voltage disconnect.

Table 3. Product Comparisons

Feature	Cisco End-of-Life Product	Cisco Replacement Product
–	Cisco ONS 15454 Configured-Bay Assemblies, 4SA-1BNC1 and 0SA	Cisco ONS 15454 Configured-Bay Assemblies, 4SA-1BNC-FL and 0SA-FL
Part numbers Four-shelf solution Zero-shelf solution	15454-4SA-1BNC1= 15454-0SA=	15454-4SA-1BNC-FL 15454-0SA-FL
Power distribution and management	Fuse and alarm panel with external low-voltage disconnect devices	Enhanced fuse and alarm panel with integrated low-voltage disconnect devices

Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.

For More Information

For more information about the Cisco ONS 15454, visit http://cisco.com/en/US/products/hw/optical/ps2006/ps2010/index.html or contact your local account representative.

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html

To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice

Was this Document Helpful?

Feedback