Einführung
In diesem Dokument wird beschrieben, wie die Datenbank von einem Cisco Gerät der M-Serie auf ein anderes gesichert wird.
Voraussetzungen
Anforderungen
Cisco empfiehlt, über Kenntnisse in folgenden Bereichen zu verfügen:
Problem
Starten Sie die Sicherung der DB zu einem sekundären Gerät der M-Serie.
Lösung
Hier sind die Anforderungen aufgeführt, bevor Sie mit dem Backup der DB auf ein sekundäres Gerät der M-Serie beginnen.
- Beide Geräte der M-Serie müssen sich in derselben AsyncOS-Version befinden (ab Version 7.2).
- Das Ziel-Gerät der M-Serie muss über genügend Speicherplatz für das Backup verfügen. Navigieren Sie zu Systemverwaltung > Datenträgerverwaltung (siehe Online-Dokumentation zur Zuweisung, wenn ein Datenträger nicht vorhanden ist).
Wenn Sie während der Einrichtung nicht genügend Speicherplatz zur Verfügung haben, wird möglicherweise eine ähnliche Meldung angezeigt:
Verifying target machine for version compatibility and disk space...
Backup cannot be scheduled. Reason: There is not enough space for Centralized
Spam Quarantine, Centralized Email Tracking, Centralized Reporting. Please
increase disk allocation for these services on the target machine.
ODER
Verifying target machine for version compatibility and disk space...
Backup cannot be scheduled. Reason: There is not enough space for Centralized
Web Tracking. Please increase disk allocation for these services on the target
machine.
Überprüfen Sie die Speicherplatzquote wie oben auf dem Zielcomputer angegeben.
Die beiden Security Management Appliances (SMAs), ein M650 (Quelle des DB-Systems m650sma.run) und ein Ziel M1050 (Ziel-Backup des DB-Systems mit dem Namen m1050sma.run und IP 192.168.15.1) ).
Melden Sie sich bei der CLI der Quell-M-Serie an (in unserem Test sma1.example.com), und geben Sie die folgenden Befehle ein:
sma1.example.com> backupconfig
Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> setup
Enter level of verbosity:
[0]> 0 < this can be 0 or 3 0=lowest verbosity of backup logs and 3 is the highest>
Compression is desirable on slow connections, but will only slow down backup on
fast networks. Would you like to enable compression? [N]> <hit enter here to pick default withing the brackets [N]>
Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> verify
Enter the IP address of a machine to transfer data to.
[]> 192.168.15.1
Enter a name to identify this appliance
[]>sma2.example.com
Please enter username and password:
Username:
[]> admin
Password:
[]> <enter admin password for the target SMA>
Verifying target machine for version compatibility and disk space...
Backup can be scheduled on to 192.168.15.1.
Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> schedule
Enter the IP address of a machine to transfer data to.
[]> 192.168.15.1
Enter a name to identify this appliance
[]>sma2.example.com
Please enter username and password:
Username:
[]> admin
Password:
[]> <type the admin password on the target SMA>
Verifying target machine for version compatibility and disk space...
1. Set up a repeating backup schedule
2. Schedule a single backup
3. Start a single backup now
[1]>
1. Daily
2. Weekly
3. Monthly
[1]> 3
What day of the month would you like the backup to occur?
[1]> <hit enter here>
What time of day would you like the backup to start? Please enter in HH:MM
format.
[]> 02:00
Please enter a name for this backup job:
[]> weekly
Backup "weekly" has been scheduled successfully.
Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> view
Scheduled Backups:
# Name IP Schedule
= ====== =============== ================================
1 weekly To 192.168.15.1 on day 1 of every month at 02:00
Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> <hit enter until your back in CLI>
sma1.example.com> commit
Please enter some comments describing your changes:
[]> scheduled a weekly backup
Changes committed: Wed Mar 16 18:09:51 2011 GMT
sma1.example.com>
Feedback