Konfigurieren des Cisco Routers und der VPN-Clients mithilfe von PPTP und MPPE

Download-Optionen

  • PDF     (513.3 KB)
    Mit Adobe Reader auf verschiedenen Geräten anzeigen
  • ePub     (467.8 KB)
    In verschiedenen Apps auf iPhone, iPad, Android, Sony Reader oder Windows Phone anzeigen
  • Mobi (Kindle)     (442.6 KB)
    Auf einem Kindle-Gerät oder einer Kindle-App auf mehreren Geräten anzeigen
Aktualisiert:1. Februar 2007
Dokument-ID:29781

Inklusive Sprache

In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.

Informationen zu dieser Übersetzung

Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.

Einführung

Dieses Dokument beschreibt die Konfiguration eines Cisco IOS® Routers, der PPTP-Clients (Point-to-Point Tunneling Protocol) von Windows 2000 und MPPE (Microsoft Point-to-Point Encryption Protocol) terminiert.

Weitere Informationen zur PPTP-Authentifizierung mit dem Cisco Secure Access Control Server (ACS) finden Sie unter Konfigurieren der PPTP-Authentifizierung für Windows-Router.

Voraussetzungen

Anforderungen

Für dieses Dokument bestehen keine speziellen Anforderungen.

Verwendete Komponenten

Die Informationen in diesem Dokument basieren auf den Versionen Software und Hardware:

  • Cisco 2621 Router mit Cisco IOS Software-Version 12.2

  • Microsoft Windows 2000

Die Informationen in diesem Dokument wurden von den Geräten in einer bestimmten Laborumgebung erstellt. Alle in diesem Dokument verwendeten Geräte haben mit einer leeren (Standard-)Konfiguration begonnen. Wenn Ihr Netzwerk in Betrieb ist, stellen Sie sicher, dass Sie die potenziellen Auswirkungen eines Befehls verstehen.

Netzwerkdiagramm

In diesem Dokument wird die folgende Netzwerkeinrichtung verwendet:

pptp-ios-1.gif

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie unter Cisco Technical Tips Conventions (Technische Tipps zu Konventionen von Cisco).

PPTP-Router-Konfiguration

Diese IOS-Befehle gelten für alle Plattformen, die PPTP unterstützen. 

2621#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.

!--- Enable virtual private dial-up networking. 

2621(config)#vpdn enable

!--- Enters VPDN group configuration mode for the specified VPDN group. 

2621(config)#vpdn-group 1

!--- Enters VPDN accept-dialin configuration mode !--- and enables the router to accept dial-in requests.

2621(config-vpdn)#accept-dialin

!--- Specifies which PPTP protocol is used.

2621(config-vpdn-acc-in)#protocol pptp

!--- Specifies the virtual template that is used !--- in order to clone the virtual access interface.

2621(config-vpdn-acc-in)#virtual-template 1
2621(config-vpdn-acc-in)#exit

2621(config)#ip local pool test 192.168.1.1 192.168.1.250

!--- Create virtual-template interface used for cloning !--- virtual-access interfaces with the use of address pool test !--- with Challenge Authentication Protocol (CHAP) authentication, PAP, and MS-CHAP.

2621(config)#interface virtual-template 1

2621(config-if)#encapsulation ppp
2621(config-if)#peer default ip address pool test
2621(config-if)#ip unnumbered FastEthernet0/0
2621(config-if)#no keepalive
2621(config-if)#ppp encrypt mppe auto
2621(config-if)#ppp authentication pap chap ms-chap
Cisco Router 2621 
2621#show run
Building configuration...

Current configuration : 1566 bytes
!
version 12.2
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname 2621
!
boot system flash
logging queue-limit 100
enable secret 5 $1$dGFC$VA28yOWzxlCKyj1dq8SkE/
!
username cisco password 0 cisco123
username client password 0 testclient
ip subnet-zero
ip cef
!
!
no ip domain lookup
ip domain name cisco.com
!
vpdn enable

!--- Enable VDPN.

!
vpdn-group 1

!--- Default PPTP VPDN group.

 accept-dialin
  protocol pptp
  virtual-template 1
!
!
!
!
!
!
!
!
!
!
voice call carrier capacity active
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
controller T1 0/0
 framing sf
 linecode ami
!
controller T1 0/1
 framing sf
 linecode ami
!
!
!
interface Loopback0
 ip address 10.100.100.1 255.255.255.0
 ip nat inside
!
interface FastEthernet0/0
 ip address 172.16.142.191 255.255.255.0
 no ip route-cache
 no ip mroute-cache
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip address 10.130.13.13 255.255.0.0
 duplex auto
 speed auto
!

!--- Create virtual-template interface used for cloning !--- virtual-access interfaces with the use of address pool test !--- with CHAP authentication, PAP, and MS-CHAP.

interface Virtual-Template1
 ip unnumbered FastEthernet0/0
 peer default ip address pool test
 no keepalive
 ppp encrypt mppe auto
 ppp authentication pap chap ms-chap
!

!--- Create IP pool named test and specify IP range.

ip local pool test 192.168.1.1 192.168.1.250
no ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.142.1
!
ip pim bidir-enable
!
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
 password cisco
 login
!
!
end

2621#

Router-Konfiguration mit MPPE und MS-CHAP 


!--- Enter configuration commands, one per line. !--- End with CNTL/Z.

2621(config)#interface Virtual-Template1
2621(config-if)#ppp authentication ms-chap
2621(config-if)#ppp encrypt mppe ?
  128   128 Bit Encryption only
  40    40 Bit Encryption only
  auto  Will offer 40 and 128 bit if available

2621(config-if)#ppp encrypt mppe auto
2621(config-if)#ppp encrypt mppe auto required

Einstellungen und Konfiguration von Windows 2000 VPN (PPTP)

Gehen Sie wie folgt vor:

  1. Wählen Sie Start > Einstellungen > Netzwerk- und DFÜ-Verbindungen > Neue Verbindung herstellen aus.

    pptp-ios-2.gif

  2. Wenn das Fenster Network Connection Wizard (Assistent für Netzwerkverbindungen) angezeigt wird, wählen Sie Network Connection Type (Netzwerkverbindungstyp) und Connect to a private network through the Internet (Verbindung mit einem privaten Netzwerk über das Internet herstellen) aus.

    pptp-ios-3.gif

  3. Wählen Sie Diese erste Verbindung automatisch wählen aus.

    pptp-ios-4.gif

  4. Geben Sie eine Zieladresse im Feld Host oder IP-Adresse an, und klicken Sie auf Weiter.

    pptp-ios-5.gif

  5. Wählen Sie Start > Einstellungen > Netzwerk und DFÜ-Verbindungen, und wählen Sie die kürzlich konfigurierte Verbindung aus.

    pptp-ios-6.gif

  6. Wenn dieses Fenster angezeigt wird, wählen Sie Eigenschaften > Sicherheit, um die Option richtig einzustellen.

    pptp-ios-7.gif

  7. Wählen Sie Erweitert (Kundeneinstellungen), wählen Sie Einstellungen, und wählen Sie die entsprechende Verschlüsselungsstufe (Datenverschlüsselung) und Authentifizierung (Zulassen dieser Protokolle) aus.

    pptp-ios-8.gif

    pptp-ios-9.gif

  8. Wählen Sie unter Networking (Typ des VPN-Servers, der aufgerufen wird) PPTP aus und klicken Sie auf OK.

    pptp-ios-10.gif

  9. Das Fenster Benutzername und Kennwort überprüfen wird angezeigt.

    pptp-ios-11.gif

  10. Das Fenster Computer im Netzwerk registrieren wird angezeigt.

    pptp-ios-12.gif

  11. Das Fenster Verbindungseigenschaften wird angezeigt.

    pptp-ios-13.gif

  12. In diesen Fenstern wird der Verbindungsstatus angezeigt.

    pptp-ios-14.gif

    pptp-ios-15.gif

Überprüfen

Dieser Abschnitt enthält Informationen, mit denen Sie die ordnungsgemäße Funktion Ihrer Konfiguration bestätigen können.

Das Output Interpreter Tool (nur registrierte Kunden) (OIT) unterstützt bestimmte show-Befehle. Verwenden Sie das OIT, um eine Analyse der Ausgabe des Befehls show anzuzeigen.

  • show debug - Zeigt aktuell aktivierte Debugbefehle an, um Fehler zu beheben.

  • show user: Zeigt die aktuell angemeldeten Benutzer und deren Status an

  • show ip route connected: Zeigt den aktuellen Status der Routing-Tabelle an

  • show vpdn - Zeigt Informationen über aktiven L2TP (Layer 2 Tunnel Protocol)- oder L2F (Layer 2 Forwarding) Protocol-Tunnel und Nachrichtenbezeichner in einem Virtual Private Dialup Network (VPDN) an.

Dies ist die Beispielausgabe des Befehls show debug.

2621#show debug
PPP:
  PPP authentication debugging is on
  PPP protocol negotiation debugging is on


VPN:
  VPDN events debugging is on

Dies ist die Debug-Ausgabe mit der ursprünglichen PPTP-Konfiguration.

2621#
*Mar  5 02:16:25.675: ppp2 PPP: Using vpn set call direction
*Mar  5 02:16:25.675: ppp2 PPP: Treating connection as a callin
*Mar  5 02:16:25.675: ppp2 PPP: Phase is ESTABLISHING, Passive Open
*Mar  5 02:16:25.675: ppp2 LCP: State is Listen
*Mar  5 02:16:27.663: ppp2 LCP: TIMEout: State Listen
*Mar  5 02:16:27.663: ppp2 PPP: Authorization required
*Mar  5 02:16:27.663: ppp2 LCP: O CONFREQ [Listen] id 1 len 14
*Mar  5 02:16:27.663: ppp2 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:16:27.663: ppp2 LCP:    MagicNumber 0x1658CF62 (0x05061658CF62)
*Mar  5 02:16:27.667: ppp2 LCP: I CONFACK [REQsent] id 1 len 14
*Mar  5 02:16:27.667: ppp2 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:16:27.667: ppp2 LCP:    MagicNumber 0x1658CF62 (0x05061658CF62)
*Mar  5 02:16:27.695: ppp2 LCP: I CONFREQ [ACKrcvd] id 1 len 44
*Mar  5 02:16:27.695: ppp2 LCP:    MagicNumber 0x131A2427 (0x0506131A2427)
*Mar  5 02:16:27.695: ppp2 LCP:    PFC (0x0702)
*Mar  5 02:16:27.695: ppp2 LCP:    ACFC (0x0802)
*Mar  5 02:16:27.695: ppp2 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:16:27.695: ppp2 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:16:27.695: ppp2 LCP:    EndpointDisc 1 Local
*Mar  5 02:16:27.699: ppp2 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:16:27.699: ppp2 LCP:     (0x897EAE00000002)
*Mar  5 02:16:27.699: ppp2 LCP: O CONFREJ [ACKrcvd] id 1 len 11
*Mar  5 02:16:27.699: ppp2 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:16:27.699: ppp2 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:16:27.703: ppp2 LCP: I CONFREQ [ACKrcvd] id 2 len 37
*Mar  5 02:16:27.703: ppp2 LCP:    MagicNumber 0x131A2427 (0x0506131A2427)
*Mar  5 02:16:27.703: ppp2 LCP:    PFC (0x0702)
*Mar  5 02:16:27.707: ppp2 LCP:    ACFC (0x0802)
*Mar  5 02:16:27.707: ppp2 LCP:    EndpointDisc 1 Local
*Mar  5 02:16:27.707: ppp2 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:16:27.707: ppp2 LCP:     (0x897EAE00000002)
*Mar  5 02:16:27.707: ppp2 LCP: O CONFACK [ACKrcvd] id 2 len 37
*Mar  5 02:16:27.707: ppp2 LCP:    MagicNumber 0x131A2427 (0x0506131A2427)
*Mar  5 02:16:27.707: ppp2 LCP:    PFC (0x0702)
*Mar  5 02:16:27.707: ppp2 LCP:    ACFC (0x0802)
*Mar  5 02:16:27.711: ppp2 LCP:    EndpointDisc 1 Local
*Mar  5 02:16:27.711: ppp2 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:16:27.711: ppp2 LCP:     (0x897EAE00000002)
*Mar  5 02:16:27.711: ppp2 LCP: State is Open
*Mar  5 02:16:27.711: ppp2 PPP: Phase is AUTHENTICATING, by this end
*Mar  5 02:16:27.715: ppp2 LCP: I IDENTIFY [Open] id 3 len 18 magic 
                                0x131A2427 MSRASV5.00
*Mar  5 02:16:27.719: ppp2 LCP: I IDENTIFY [Open] id 4 len 28 magic
                                0x131A2427 MSRAS-1-USHAFIQ-W2K1
*Mar  5 02:16:27.719: ppp2 PAP: I AUTH-REQ id 1 len 19 from "cisco"
*Mar  5 02:16:27.719: ppp2 PAP: Authenticating peer cisco
*Mar  5 02:16:27.719: ppp2 PPP: Phase is FORWARDING, Attempting Forward
*Mar  5 02:16:27.719: ppp2 PPP: Phase is AUTHENTICATING, Unauthenticated User
*Mar  5 02:16:27.719: ppp2 PPP: Sent PAP LOGIN Request
*Mar  5 02:16:27.723: ppp2 PPP: Received LOGIN Response PASS
*Mar  5 02:16:27.723: ppp2 PPP: Phase is FORWARDING, Attempting Forward
*Mar  5 02:16:27.727: Vi4 PPP: Phase is DOWN, Setup
*Mar  5 02:16:27.727:   Tnl/Sn3/3 PPTP: Virtual interface created for  
                        bandwidth 100000 Kbps
*Mar  5 02:16:27.731: Vi4  Tnl/Sn3/3 PPTP: VPDN session up
*Mar  5 02:16:27.735: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to up
*Mar  5 02:16:27.735: Vi4 PPP: Phase is AUTHENTICATING, Authenticated User
*Mar  5 02:16:27.735: Vi4 PAP: O AUTH-ACK id 1 len 5
*Mar  5 02:16:27.739: Vi4 PPP: Phase is UP
*Mar  5 02:16:27.739: Vi4 IPCP: O CONFREQ [Closed] id 1 len 10
*Mar  5 02:16:27.739: Vi4 IPCP:    Address 172.16.142.191 (0x0306AC108EBF)
*Mar  5 02:16:27.739: Vi4 CCP: O CONFREQ [Closed] id 1 len 4
*Mar  5 02:16:27.739: Vi4 PPP: Process pending packets
*Mar  5 02:16:27.747: Vi4 CCP: I CONFREQ [REQsent] id 5 len 10
*Mar  5 02:16:27.747: Vi4 CCP:    MS-PPC supported bits 0x01000001 (0x120601000001)
*Mar  5 02:16:27.747: Vi4 CCP: O CONFNAK [REQsent] id 5 len 10
*Mar  5 02:16:27.751: Vi4 CCP:    MS-PPC supported bits 0x01000060 (0x120601000060)
*Mar  5 02:16:27.751: Vi4 CCP: I CONFACK [REQsent] id 1 len 4
*Mar  5 02:16:27.751: Vi4 IPCP: I CONFREQ [REQsent] id 6 len 34
*Mar  5 02:16:27.751: Vi4 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar  5 02:16:27.751: Vi4 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Mar  5 02:16:27.751: Vi4 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Mar  5 02:16:27.755: Vi4 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Mar  5 02:16:27.755: Vi4 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Mar  5 02:16:27.755: Vi4 AAA/AUTHOR/IPCP: Start.  Her address 0.0.0.0, we want 0.0.0.0
*Mar  5 02:16:27.755: Vi4 AAA/AUTHOR/IPCP: Done.  Her address 0.0.0.0, we want 0.0.0.0
*Mar  5 02:16:27.755: Vi4 IPCP: Pool returned 192.168.1.4
*Mar  5 02:16:27.755: Vi4 IPCP: O CONFREJ [REQsent] id 6 len 28
*Mar  5 02:16:27.759: Vi4 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Mar  5 02:16:27.759: Vi4 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Mar  5 02:16:27.759: Vi4 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Mar  5 02:16:27.759: Vi4 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Mar  5 02:16:27.759: Vi4 IPCP: I CONFACK [REQsent] id 1 len 10
*Mar  5 02:16:27.759: Vi4 IPCP:    Address 172.16.142.191 (0x0306AC108EBF)
*Mar  5 02:16:27.763: Vi4 CCP: I CONFREQ [ACKrcvd] id 7 len 4
*Mar  5 02:16:27.767: Vi4 CCP: O CONFACK [ACKrcvd] id 7 len 4
*Mar  5 02:16:27.767: Vi4 CCP: State is Open
*Mar  5 02:16:27.767: Vi4 CCP: Compression not negotiated
*Mar  5 02:16:27.767: Vi4 CCP: Decompression not negotiated
*Mar  5 02:16:27.767: Vi4 CCP: Negotiation mismatch, closing CCP
*Mar  5 02:16:27.767: Vi4 CCP: O TERMREQ [Open] id 2 len 4
*Mar  5 02:16:27.767: Vi4 IPCP: I CONFREQ [ACKrcvd] id 8 len 10
*Mar  5 02:16:27.767: Vi4 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar  5 02:16:27.771: Vi4 IPCP: O CONFNAK [ACKrcvd] id 8 len 10
*Mar  5 02:16:27.771: Vi4 IPCP:    Address 192.168.1.4 (0x0306C0A80104)
*Mar  5 02:16:27.775: Vi4 CCP: I TERMACK [TERMsent] id 2 len 4
*Mar  5 02:16:27.775: Vi4 CCP: State is Closed
*Mar  5 02:16:27.775: Vi4 IPCP: I CONFREQ [ACKrcvd] id 9 len 10
*Mar  5 02:16:27.775: Vi4 IPCP:    Address 192.168.1.4 (0x0306C0A80104)
*Mar  5 02:16:27.775: Vi4 IPCP: O CONFACK [ACKrcvd] id 9 len 10
*Mar  5 02:16:27.779: Vi4 IPCP:    Address 192.168.1.4 (0x0306C0A80104)
*Mar  5 02:16:27.779: Vi4 IPCP: State is Open
*Mar  5 02:16:27.783: Vi4 IPCP: Install route to 192.168.1.4
*Mar  5 02:16:27.783: Vi4 IPCP: Add link info for cef entry 192.168.1.4
*Mar  5 02:16:28.735: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
                       Virtual-Access4, changed state to up
*Mar  5 02:16:37.743: Vi4 CCP: O CONFREQ [Closed] id 3 len 4
2621#
2621#

Dies ist die Debug-Ausgabe mit der erforderlichen MPPE- und MS-CHAP-Konfiguration.

2621#
*Mar  5 02:25:01.815: ppp4 PPP: Using vpn set call direction
*Mar  5 02:25:01.815: ppp4 PPP: Treating connection as a callin
*Mar  5 02:25:01.815: ppp4 PPP: Phase is ESTABLISHING, Passive Open
*Mar  5 02:25:01.815: ppp4 LCP: State is Listen
*Mar  5 02:25:03.823: ppp4 LCP: TIMEout: State Listen
*Mar  5 02:25:03.823: ppp4 PPP: Authorization required
*Mar  5 02:25:03.823: ppp4 LCP: O CONFREQ [Listen] id 1 len 15
*Mar  5 02:25:03.823: ppp4 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:25:03.823: ppp4 LCP:    MagicNumber 0x1660AFA4 (0x05061660AFA4)
*Mar  5 02:25:03.843: ppp4 LCP: I CONFACK [REQsent] id 1 len 15
*Mar  5 02:25:03.843: ppp4 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:25:03.843: ppp4 LCP:    MagicNumber 0x1660AFA4 (0x05061660AFA4)
*Mar  5 02:25:03.843: ppp4 LCP: I CONFREQ [ACKrcvd] id 1 len 44
*Mar  5 02:25:03.843: ppp4 LCP:    MagicNumber 0x4B5A2A81 (0x05064B5A2A81)
*Mar  5 02:25:03.843: ppp4 LCP:    PFC (0x0702)
*Mar  5 02:25:03.847: ppp4 LCP:    ACFC (0x0802)
*Mar  5 02:25:03.847: ppp4 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:25:03.847: ppp4 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:25:03.847: ppp4 LCP:    EndpointDisc 1 Local
*Mar  5 02:25:03.847: ppp4 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:25:03.847: ppp4 LCP:     (0x897EAE00000004)
*Mar  5 02:25:03.847: ppp4 LCP: O CONFREJ [ACKrcvd] id 1 len 11
*Mar  5 02:25:03.847: ppp4 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:25:03.851: ppp4 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:25:03.851: ppp4 LCP: I CONFREQ [ACKrcvd] id 2 len 37
*Mar  5 02:25:03.855: ppp4 LCP:    MagicNumber 0x4B5A2A81 (0x05064B5A2A81)
*Mar  5 02:25:03.855: ppp4 LCP:    PFC (0x0702)
*Mar  5 02:25:03.855: ppp4 LCP:    ACFC (0x0802)
*Mar  5 02:25:03.855: ppp4 LCP:    EndpointDisc 1 Local
*Mar  5 02:25:03.855: ppp4 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:25:03.855: ppp4 LCP:     (0x897EAE00000004)
*Mar  5 02:25:03.855: ppp4 LCP: O CONFACK [ACKrcvd] id 2 len 37
*Mar  5 02:25:03.859: ppp4 LCP:    MagicNumber 0x4B5A2A81 (0x05064B5A2A81)
*Mar  5 02:25:03.859: ppp4 LCP:    PFC (0x0702)
*Mar  5 02:25:03.859: ppp4 LCP:    ACFC (0x0802)
*Mar  5 02:25:03.859: ppp4 LCP:    EndpointDisc 1 Local
*Mar  5 02:25:03.859: ppp4 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:25:03.859: ppp4 LCP:     (0x897EAE00000004)
*Mar  5 02:25:03.859: ppp4 LCP: State is Open
*Mar  5 02:25:03.859: ppp4 PPP: Phase is AUTHENTICATING, by this end
*Mar  5 02:25:03.863: ppp4 MS-CHAP: O CHALLENGE id 1 len 21 from "2621    "
*Mar  5 02:25:03.867: ppp4 LCP: I IDENTIFY [Open] id 3 len 18 magic 0x4B5A2A81 
                      MSRASV5.00
*Mar  5 02:25:03.867: ppp4 LCP: I IDENTIFY [Open] id 4 len 28 magic 0x4B5A2A81 
                      MSRAS-1-USHAFIQ-W2K1
*Mar  5 02:25:03.867: ppp4 MS-CHAP: I RESPONSE id 1 len 59 from "cisco"
*Mar  5 02:25:03.867: ppp4 PPP: Phase is FORWARDING, Attempting Forward
*Mar  5 02:25:03.871: ppp4 PPP: Phase is AUTHENTICATING, Unauthenticated User
*Mar  5 02:25:03.871: ppp4 PPP: Sent MSCHAP LOGIN Request
*Mar  5 02:25:03.963: ppp4 PPP: Received LOGIN Response PASS
*Mar  5 02:25:03.963: ppp4 PPP: Phase is FORWARDING, Attempting Forward
*Mar  5 02:25:03.975: Vi4 PPP: Phase is DOWN, Setup
*Mar  5 02:25:03.975:   Tnl/Sn5/5 PPTP: Virtual interface created for  
                        bandwidth 100000 Kbps
*Mar  5 02:25:03.979: Vi4  Tnl/Sn5/5 PPTP: VPDN session up
*Mar  5 02:25:03.983: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to up
*Mar  5 02:25:03.983: Vi4 PPP: Phase is AUTHENTICATING, Authenticated User
*Mar  5 02:25:03.983: Vi4 MS-CHAP: O SUCCESS id 1 len 4
*Mar  5 02:25:03.987: Vi4 PPP: Phase is UP
*Mar  5 02:25:03.987: Vi4 IPCP: O CONFREQ [Closed] id 1 len 10
*Mar  5 02:25:03.987: Vi4 IPCP:    Address 172.16.142.191 (0x0306AC108EBF)
*Mar  5 02:25:03.987: Vi4 CCP: O CONFREQ [Closed] id 1 len 10
*Mar  5 02:25:03.987: Vi4 CCP:    MS-PPC supported bits 0x01000060 (0x120601000060)
*Mar  5 02:25:03.987: Vi4 PPP: Process pending packets
*Mar  5 02:25:03.995: Vi4 CCP: I CONFREQ [REQsent] id 5 len 10
*Mar  5 02:25:03.995: Vi4 CCP:    MS-PPC supported bits 0x01000001 (0x120601000001)
*Mar  5 02:25:03.999: Vi4 CCP: O CONFNAK [REQsent] id 5 len 10
*Mar  5 02:25:03.999: Vi4 CCP:    MS-PPC supported bits 0x01000060 (0x120601000060)
*Mar  5 02:25:03.999: Vi4 CCP: I CONFNAK [REQsent] id 1 len 10
*Mar  5 02:25:03.999: Vi4 CCP:    MS-PPC supported bits 0x01000040 (0x120601000040)
*Mar  5 02:25:03.999: Vi4 CCP: O CONFREQ [REQsent] id 2 len 10
*Mar  5 02:25:03.999: Vi4 CCP:    MS-PPC supported bits 0x01000040 (0x120601000040)
*Mar  5 02:25:04.003: Vi4 IPCP: I CONFREQ [REQsent] id 6 len 34
*Mar  5 02:25:04.003: Vi4 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar  5 02:25:04.003: Vi4 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Mar  5 02:25:04.003: Vi4 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Mar  5 02:25:04.003: Vi4 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Mar  5 02:25:04.003: Vi4 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Mar  5 02:25:04.003: Vi4 AAA/AUTHOR/IPCP: Start.  Her address 0.0.0.0, we want 0.0.0.0
*Mar  5 02:25:04.007: Vi4 AAA/AUTHOR/IPCP: Done.  Her address 0.0.0.0, we want 0.0.0.0
*Mar  5 02:25:04.007: Vi4 IPCP: Pool returned 192.168.1.4
*Mar  5 02:25:04.007: Vi4 IPCP: O CONFREJ [REQsent] id 6 len 28
*Mar  5 02:25:04.007: Vi4 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Mar  5 02:25:04.007: Vi4 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Mar  5 02:25:04.007: Vi4 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Mar  5 02:25:04.011: Vi4 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Mar  5 02:25:04.011: Vi4 IPCP: I CONFACK [REQsent] id 1 len 10
*Mar  5 02:25:04.011: Vi4 IPCP:    Address 172.16.142.191 (0x0306AC108EBF)
*Mar  5 02:25:04.015: Vi4 CCP: I CONFREQ [REQsent] id 7 len 10
*Mar  5 02:25:04.015: Vi4 CCP:    MS-PPC supported bits 0x01000040 (0x120601000040)
*Mar  5 02:25:04.015: Vi4 CCP: O CONFACK [REQsent] id 7 len 10
*Mar  5 02:25:04.015: Vi4 CCP:    MS-PPC supported bits 0x01000040 (0x120601000040)
*Mar  5 02:25:04.019: Vi4 CCP: I CONFACK [ACKsent] id 2 len 10
*Mar  5 02:25:04.019: Vi4 CCP:    MS-PPC supported bits 0x01000040 (0x120601000040)
*Mar  5 02:25:04.019: Vi4 CCP: State is Open
*Mar  5 02:25:04.023: Vi4 IPCP: I CONFREQ [ACKrcvd] id 8 len 10
*Mar  5 02:25:04.027: Vi4 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar  5 02:25:04.027: Vi4 IPCP: O CONFNAK [ACKrcvd] id 8 len 10
*Mar  5 02:25:04.027: Vi4 IPCP:    Address 192.168.1.4 (0x0306C0A80104)
*Mar  5 02:25:04.031: Vi4 IPCP: I CONFREQ [ACKrcvd] id 9 len 10
*Mar  5 02:25:04.031: Vi4 IPCP:    Address 192.168.1.4 (0x0306C0A80104)
*Mar  5 02:25:04.031: Vi4 IPCP: O CONFACK [ACKrcvd] id 9 len 10
*Mar  5 02:25:04.031: Vi4 IPCP:    Address 192.168.1.4 (0x0306C0A80104)
*Mar  5 02:25:04.031: Vi4 IPCP: State is Open
*Mar  5 02:25:04.035: Vi4 IPCP: Install route to 192.168.1.4
*Mar  5 02:25:04.035: Vi4 IPCP: Add link info for cef entry 192.168.1.4
*Mar  5 02:25:04.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
                      Virtual-Access4, changed state to up

Diese Anzeige der Benutzerausgabe erfolgt vor der Aktivierung von MS-CHAP und MPPE.

2621#show user
    Line       User       Host(s)              Idle       Location
*  0 con 0                idle                 00:00:00

  Interface    User               Mode         Idle     Peer Address
  Vi4          cisco              PPPoVPDN     00:00:01 192.168.1.4

Diese Anzeige der Benutzerausgabe erfolgt nach Aktivierung von MS-CHAP und MPPE. 

2621#show user
    Line       User       Host(s)              Idle       Location
*  0 con 0                idle                 00:00:00

  Interface    User               Mode         Idle     Peer Address
  Vi4          cisco              PPPoVPDN     00:00:00 192.168.1.4

Diese show ip route connected output ist vor der Aktivierung von MS-CHAP und MPPE.

2621#show ip route connected
     172.16.0.0/24 is subnetted, 1 subnets
C       172.16.142.0 is directly connected, FastEthernet0/0
     10.0.0.0/24 is subnetted, 1 subnets
C       10.100.100.0 is directly connected, Loopback0
     192.168.1.0/32 is subnetted, 1 subnets
C       192.168.1.4 is directly connected, Virtual-Access4

Diese show vpdn-Ausgabe erfolgt vor der Aktivierung von MS-CHAP und MPPE. 

2621#show vpdn

%No active L2TP tunnels

%No active L2F tunnels

PPTP Tunnel and Session Information Total tunnels 1 sessions 1

LocID Remote Name     State    Remote Address  Port  Sessions VPDN Group
3                     estabd   171.69.89.81    4737  1        1

LocID RemID TunID Intf    Username      State   Last Chg Uniq ID
3     32768 3     Vi4     cisco         estabd  00:01:44 2

%No active PPPoE tunnels

Diese show vpdn-Ausgabe erfolgt nach Aktivierung von MS-CHAP und MPPE.

2621#show vpdn

%No active L2TP tunnels

%No active L2F tunnels

PPTP Tunnel and Session Information Total tunnels 1 sessions 1

LocID Remote Name     State    Remote Address  Port  Sessions VPDN Group
5                     estabd   171.69.89.81    4893  1        1

LocID RemID TunID Intf    Username      State   Last Chg Uniq ID
5     0     5     Vi4     cisco         estabd  00:00:37 4

%No active PPPoE tunnels

Fehlerbehebung

Dieser Abschnitt enthält Informationen zur Fehlerbehebung in Ihrer Konfiguration.

Befehle zur Fehlerbehebung

Bestimmte show-Befehle werden vom Output Interpreter Tool unterstützt (nur registrierte Kunden), mit dem Sie eine Analyse der show-Befehlsausgabe anzeigen können.

Hinweis: Beachten Sie vor der Verwendung von Debug-Befehlen die Informationen zu Debug-Befehlen.

  • clear vpdn tunnel pptp - Wird zum Herunterfahren eines angegebenen Tunnels und aller Sitzungen im Tunnel verwendet und löscht den angegebenen PPTP-Tunnel.

2621#clear vpdn tunnel pptp ip remote 171.69.89.81
Starting to clear the tunnel

2621#
*Mar  5 02:27:35.611: Vi4 PPP: Sending Acct Event[Down] id[5]
*Mar  5 02:27:35.611: Vi4 VPDN: Reseting interface
*Mar  5 02:27:35.611: Vi4 PPP: Block vaccess from being freed [0x1D]
*Mar  5 02:27:35.619: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to down
*Mar  5 02:27:35.619: Vi4 CCP: State is Closed
*Mar  5 02:27:35.623: Vi4 MPPE: Required encryption not negotiated
*Mar  5 02:27:35.623: Vi4 IPCP: Remove link info for cef entry 192.168.1.4
*Mar  5 02:27:35.623: Vi4 PPP: Unlocked by [0x4] Still Locked by [0x1B]
*Mar  5 02:27:35.623: Vi4 PPP: Unlocked by [0x10] Still Locked by [0xB]
*Mar  5 02:27:35.623: Vi4 PPP: Phase is TERMINATING
*Mar  5 02:27:35.627: Vi4 LCP: O TERMREQ [Open] id 2 len 4
*Mar  5 02:27:35.627: Vi4 IPCP: State is Closed
*Mar  5 02:27:35.627: Vi4 PPP: Unlocked by [0x8] Still Locked by [0x3]
*Mar  5 02:27:35.627: Vi4 LCP: State is Closed
*Mar  5 02:27:35.627: Vi4 PPP: Phase is DOWN
*Mar  5 02:27:35.627: Vi4 PPP: Unlocked by [0x2] Still Locked by [0x1]
*Mar  5 02:27:35.639: Vi4 IPCP: Remove route to 192.168.1.4
*Mar  5 02:27:35.639: Vi4 PPP: Unlocked by [0x1] Still Locked by [0x0]
*Mar  5 02:27:35.639: Vi4 PPP: Free previously blocked vaccess
*Mar  5 02:27:36.619: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
 Virtual-Access4, changed state to down

Entschlüsselungsfehler - Debug-Ausgabe des Routers, der für eine 128 starke Verschlüsselung konfiguriert ist, wenn der VPN-Client für eine 40-Bit-Verschlüsselung konfiguriert ist. 

2621#
2621#
*Mar  5 02:29:36.339: ppp5 PPP: Using vpn set call direction
*Mar  5 02:29:36.339: ppp5 PPP: Treating connection as a callin
*Mar  5 02:29:36.339: ppp5 PPP: Phase is ESTABLISHING, Passive Open
*Mar  5 02:29:36.343: ppp5 LCP: State is Listen
*Mar  5 02:29:38.351: ppp5 LCP: TIMEout: State Listen
*Mar  5 02:29:38.351: ppp5 PPP: Authorization required
*Mar  5 02:29:38.351: ppp5 LCP: O CONFREQ [Listen] id 1 len 15
*Mar  5 02:29:38.351: ppp5 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:29:38.351: ppp5 LCP:    MagicNumber 0x1664E006 (0x05061664E006)
*Mar  5 02:29:38.359: ppp5 LCP: I CONFACK [REQsent] id 1 len 15
*Mar  5 02:29:38.359: ppp5 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:29:38.359: ppp5 LCP:    MagicNumber 0x1664E006 (0x05061664E006)
*Mar  5 02:29:38.359: ppp5 LCP: I CONFREQ [ACKrcvd] id 1 len 44
*Mar  5 02:29:38.359: ppp5 LCP:    MagicNumber 0x793D5ED8 (0x0506793D5ED8)
*Mar  5 02:29:38.363: ppp5 LCP:    PFC (0x0702)
*Mar  5 02:29:38.363: ppp5 LCP:    ACFC (0x0802)
*Mar  5 02:29:38.363: ppp5 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:29:38.363: ppp5 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:29:38.363: ppp5 LCP:    EndpointDisc 1 Local
*Mar  5 02:29:38.363: ppp5 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:29:38.363: ppp5 LCP:     (0x897EAE00000005)
*Mar  5 02:29:38.363: ppp5 LCP: O CONFREJ [ACKrcvd] id 1 len 11
*Mar  5 02:29:38.367: ppp5 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:29:38.367: ppp5 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:29:38.367: ppp5 LCP: I CONFREQ [ACKrcvd] id 2 len 37
*Mar  5 02:29:38.371: ppp5 LCP:    MagicNumber 0x793D5ED8 (0x0506793D5ED8)
*Mar  5 02:29:38.371: ppp5 LCP:    PFC (0x0702)
*Mar  5 02:29:38.371: ppp5 LCP:    ACFC (0x0802)
*Mar  5 02:29:38.371: ppp5 LCP:    EndpointDisc 1 Local
*Mar  5 02:29:38.371: ppp5 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:29:38.371: ppp5 LCP:     (0x897EAE00000005)
*Mar  5 02:29:38.371: ppp5 LCP: O CONFACK [ACKrcvd] id 2 len 37
*Mar  5 02:29:38.375: ppp5 LCP:    MagicNumber 0x793D5ED8 (0x0506793D5ED8)
*Mar  5 02:29:38.375: ppp5 LCP:    PFC (0x0702)
*Mar  5 02:29:38.375: ppp5 LCP:    ACFC (0x0802)
*Mar  5 02:29:38.375: ppp5 LCP:    EndpointDisc 1 Local
*Mar  5 02:29:38.375: ppp5 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:29:38.375: ppp5 LCP:     (0x897EAE00000005)
*Mar  5 02:29:38.375: ppp5 LCP: State is Open
*Mar  5 02:29:38.375: ppp5 PPP: Phase is AUTHENTICATING, by this end
*Mar  5 02:29:38.379: ppp5 MS-CHAP: O CHALLENGE id 1 len 21 from "2621    "
*Mar  5 02:29:38.383: ppp5 LCP: I IDENTIFY [Open] id 3 len 18 magic 
                      0x793D5ED8 MSRASV5.00
*Mar  5 02:29:38.383: ppp5 LCP: I IDENTIFY [Open] id 4 len 28 magic 
                      0x793D5ED8 MSRAS-1-USHAFIQ-W2K1
*Mar  5 02:29:38.383: ppp5 MS-CHAP: I RESPONSE id 1 len 59 from "cisco"
*Mar  5 02:29:38.383: ppp5 PPP: Phase is FORWARDING, Attempting Forward
*Mar  5 02:29:38.387: ppp5 PPP: Phase is AUTHENTICATING, Unauthenticated User
*Mar  5 02:29:38.387: ppp5 PPP: Sent MSCHAP LOGIN Request
*Mar  5 02:29:38.475: ppp5 PPP: Received LOGIN Response PASS
*Mar  5 02:29:38.479: ppp5 PPP: Phase is FORWARDING, Attempting Forward
*Mar  5 02:29:38.483: Vi4 PPP: Phase is DOWN, Setup
*Mar  5 02:29:38.483:   Tnl/Sn6/6 PPTP: Virtual interface created for  
                        bandwidth 100000 Kbps
*Mar  5 02:29:38.483: Vi4  Tnl/Sn6/6 PPTP: VPDN session up
*Mar  5 02:29:38.487: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to up
*Mar  5 02:29:38.487: Vi4 PPP: Phase is AUTHENTICATING, Authenticated User
*Mar  5 02:29:38.487: Vi4 MS-CHAP: O SUCCESS id 1 len 4
*Mar  5 02:29:38.491: Vi4 PPP: Phase is UP
*Mar  5 02:29:38.491: Vi4 IPCP: O CONFREQ [Closed] id 1 len 10
*Mar  5 02:29:38.491: Vi4 IPCP:    Address 172.16.142.191 (0x0306AC108EBF)
*Mar  5 02:29:38.491: Vi4 CCP: O CONFREQ [Closed] id 1 len 10
*Mar  5 02:29:38.491: Vi4 CCP:    MS-PPC supported bits 0x01000060 (0x120601000060)
*Mar  5 02:29:38.491: Vi4 PPP: Process pending packets
*Mar  5 02:29:38.499: Vi4 CCP: I CONFREQ [REQsent] id 5 len 10
*Mar  5 02:29:38.503: Vi4 CCP:    MS-PPC supported bits 0x01000001 (0x120601000001)
*Mar  5 02:29:38.503: Vi4 CCP: O CONFNAK [REQsent] id 5 len 10
*Mar  5 02:29:38.503: Vi4 CCP:    MS-PPC supported bits 0x01000060 (0x120601000060)
*Mar  5 02:29:38.503: Vi4 CCP: I CONFREJ [REQsent] id 1 len 10
*Mar  5 02:29:38.503: Vi4 CCP:    MS-PPC supported bits 0x01000060 (0x120601000060)
*Mar  5 02:29:38.503: Vi4 MPPE: Required encryption not negotiated
*Mar  5 02:29:38.503: Vi4 PPP: Sending Acct Event[Down] id[6]
*Mar  5 02:29:38.507: Vi4 CCP: State is Closed
*Mar  5 02:29:38.507: Vi4 MPPE: Required encryption not negotiated
*Mar  5 02:29:38.507: Vi4 PPP: Phase is TERMINATING
*Mar  5 02:29:38.507: Vi4 LCP: O TERMREQ [Open] id 2 len 4
*Mar  5 02:29:38.507: Vi4 IPCP: State is Closed
*Mar  5 02:29:38.507: Vi4 LCP: State is Closed
*Mar  5 02:29:38.511: Vi4 PPP: Phase is DOWN
*Mar  5 02:29:38.511: Vi4 VPDN: Reseting interface
*Mar  5 02:29:38.515: Vi4 PPP: Phase is ESTABLISHING, Passive Open
*Mar  5 02:29:38.515: Vi4 LCP: State is Listen
*Mar  5 02:29:38.515: Vi4 CCP: O CONFREQ [Closed] id 2 len 4
*Mar  5 02:29:38.519: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to down
*Mar  5 02:29:38.519: Vi4 LCP: State is Closed
*Mar  5 02:29:38.519: Vi4 PPP: Phase is DOWN

Authentication Mismatch (Nicht übereinstimmende Authentifizierung) - Debug-Ausgabe des für MS-CHAP konfigurierten Routers und des für PAP konfigurierten VPN-Clients. 

*Mar  5 02:30:46.555: ppp6 PPP: Using vpn set call direction
*Mar  5 02:30:46.559: ppp6 PPP: Treating connection as a callin
*Mar  5 02:30:46.559: ppp6 PPP: Phase is ESTABLISHING, Passive Open
*Mar  5 02:30:46.559: ppp6 LCP: State is Listen
*Mar  5 02:30:48.559: ppp6 LCP: TIMEout: State Listen
*Mar  5 02:30:48.559: ppp6 PPP: Authorization required
*Mar  5 02:30:48.559: ppp6 LCP: O CONFREQ [Listen] id 1 len 15
*Mar  5 02:30:48.559: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.559: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.575: ppp6 LCP: I CONFNAK [REQsent] id 1 len 8
*Mar  5 02:30:48.575: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.575: ppp6 LCP: O CONFREQ [REQsent] id 2 len 15
*Mar  5 02:30:48.575: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.575: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.579: ppp6 LCP: I CONFREQ [REQsent] id 1 len 44
*Mar  5 02:30:48.579: ppp6 LCP:    MagicNumber 0x78FD271D (0x050678FD271D)
*Mar  5 02:30:48.579: ppp6 LCP:    PFC (0x0702)
*Mar  5 02:30:48.579: ppp6 LCP:    ACFC (0x0802)
*Mar  5 02:30:48.579: ppp6 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:30:48.579: ppp6 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:30:48.579: ppp6 LCP:    EndpointDisc 1 Local
*Mar  5 02:30:48.583: ppp6 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:30:48.583: ppp6 LCP:     (0x897EAE00000006)
*Mar  5 02:30:48.583: ppp6 LCP: O CONFREJ [REQsent] id 1 len 11
*Mar  5 02:30:48.583: ppp6 LCP:    Callback 6  (0x0D0306)
*Mar  5 02:30:48.583: ppp6 LCP:    MRRU 1614 (0x1104064E)
*Mar  5 02:30:48.587: ppp6 LCP: I CONFNAK [REQsent] id 2 len 8
*Mar  5 02:30:48.587: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.587: ppp6 LCP: O CONFREQ [REQsent] id 3 len 15
*Mar  5 02:30:48.587: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.587: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.591: ppp6 LCP: I CONFREQ [REQsent] id 2 len 37
*Mar  5 02:30:48.591: ppp6 LCP:    MagicNumber 0x78FD271D (0x050678FD271D)
*Mar  5 02:30:48.591: ppp6 LCP:    PFC (0x0702)
*Mar  5 02:30:48.591: ppp6 LCP:    ACFC (0x0802)
*Mar  5 02:30:48.591: ppp6 LCP:    EndpointDisc 1 Local
*Mar  5 02:30:48.591: ppp6 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:30:48.595: ppp6 LCP:     (0x897EAE00000006)
*Mar  5 02:30:48.595: ppp6 LCP: O CONFACK [REQsent] id 2 len 37
*Mar  5 02:30:48.595: ppp6 LCP:    MagicNumber 0x78FD271D (0x050678FD271D)
*Mar  5 02:30:48.595: ppp6 LCP:    PFC (0x0702)
*Mar  5 02:30:48.595: ppp6 LCP:    ACFC (0x0802)
*Mar  5 02:30:48.595: ppp6 LCP:    EndpointDisc 1 Local
*Mar  5 02:30:48.595: ppp6 LCP:     (0x131701E18F20C4D84A435B98EBA4BEA6)
*Mar  5 02:30:48.595: ppp6 LCP:     (0x897EAE00000006)
*Mar  5 02:30:48.599: ppp6 LCP: I CONFNAK [ACKsent] id 3 len 8
*Mar  5 02:30:48.599: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.599: ppp6 LCP: O CONFREQ [ACKsent] id 4 len 15
*Mar  5 02:30:48.599: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.599: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.603: ppp6 LCP: I CONFNAK [ACKsent] id 4 len 8
*Mar  5 02:30:48.603: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.607: ppp6 LCP: O CONFREQ [ACKsent] id 5 len 15
*Mar  5 02:30:48.607: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.607: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.611: ppp6 LCP: I CONFNAK [ACKsent] id 5 len 8
*Mar  5 02:30:48.611: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.611: ppp6 LCP: O CONFREQ [ACKsent] id 6 len 15
*Mar  5 02:30:48.611: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.611: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.615: ppp6 LCP: I CONFNAK [ACKsent] id 6 len 8
*Mar  5 02:30:48.615: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.615: ppp6 LCP: O CONFREQ [ACKsent] id 7 len 15
*Mar  5 02:30:48.615: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.619: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.619: ppp6 LCP: I CONFNAK [ACKsent] id 7 len 8
*Mar  5 02:30:48.619: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.623: ppp6 LCP: O CONFREQ [ACKsent] id 8 len 15
*Mar  5 02:30:48.623: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.623: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.627: ppp6 LCP: I CONFNAK [ACKsent] id 8 len 8
*Mar  5 02:30:48.627: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.627: ppp6 LCP: O CONFREQ [ACKsent] id 9 len 15
*Mar  5 02:30:48.627: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.627: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.631: ppp6 LCP: I CONFNAK [ACKsent] id 9 len 8
*Mar  5 02:30:48.631: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.631: ppp6 LCP: O CONFREQ [ACKsent] id 10 len 15
*Mar  5 02:30:48.635: ppp6 LCP:    AuthProto MS-CHAP (0x0305C22380)
*Mar  5 02:30:48.635: ppp6 LCP:    MagicNumber 0x1665F247 (0x05061665F247)
*Mar  5 02:30:48.635: ppp6 LCP: I CONFNAK [ACKsent] id 10 len 8
*Mar  5 02:30:48.639: ppp6 LCP:    AuthProto PAP (0x0304C023)
*Mar  5 02:30:48.639: ppp6 LCP: Failed to negotiate with peer
*Mar  5 02:30:48.639: ppp6 PPP: Sending Acct Event[Down] id[7]
*Mar  5 02:30:48.639: ppp6 LCP: O TERMREQ [ACKsent] id 11 len 4
*Mar  5 02:30:48.639: ppp6 PPP: Phase is TERMINATING
*Mar  5 02:30:48.647: ppp6 LCP: I TERMACK [TERMsent] id 11 len 4
*Mar  5 02:30:48.647: ppp6 LCP: State is Closed
*Mar  5 02:30:48.647: ppp6 PPP: Phase is DOWN

Zugehörige Informationen

Revisionsverlauf

Überarbeitung Veröffentlichungsdatum Kommentare
1.0
01-Feb-2007
Erstveröffentlichung

War dieses Dokument hilfreich?

FeedbackFeedback

Cisco kontaktieren