Kurzreferenz zum Erfassen der vom TAC angeforderten Ausgaben von Nexus-Switches

Download-Optionen

  • PDF     (118.5 KB)
    Mit Adobe Reader auf verschiedenen Geräten anzeigen
  • ePub     (85.6 KB)
    In verschiedenen Apps auf iPhone, iPad, Android, Sony Reader oder Windows Phone anzeigen
  • Mobi (Kindle)     (77.7 KB)
    Auf einem Kindle-Gerät oder einer Kindle-App auf mehreren Geräten anzeigen
Aktualisiert:8. Februar 2019
Dokument-ID:214107

Inklusive Sprache

In dem Dokumentationssatz für dieses Produkt wird die Verwendung inklusiver Sprache angestrebt. Für die Zwecke dieses Dokumentationssatzes wird Sprache als „inklusiv“ verstanden, wenn sie keine Diskriminierung aufgrund von Alter, körperlicher und/oder geistiger Behinderung, Geschlechtszugehörigkeit und -identität, ethnischer Identität, sexueller Orientierung, sozioökonomischem Status und Intersektionalität impliziert. Dennoch können in der Dokumentation stilistische Abweichungen von diesem Bemühen auftreten, wenn Text verwendet wird, der in Benutzeroberflächen der Produktsoftware fest codiert ist, auf RFP-Dokumentation basiert oder von einem genannten Drittanbieterprodukt verwendet wird. Hier erfahren Sie mehr darüber, wie Cisco inklusive Sprache verwendet.

Informationen zu dieser Übersetzung

Cisco hat dieses Dokument maschinell übersetzen und von einem menschlichen Übersetzer editieren und korrigieren lassen, um unseren Benutzern auf der ganzen Welt Support-Inhalte in ihrer eigenen Sprache zu bieten. Bitte beachten Sie, dass selbst die beste maschinelle Übersetzung nicht so genau ist wie eine von einem professionellen Übersetzer angefertigte. Cisco Systems, Inc. übernimmt keine Haftung für die Richtigkeit dieser Übersetzungen und empfiehlt, immer das englische Originaldokument (siehe bereitgestellter Link) heranzuziehen.

    Einführung

     In diesem Dokument werden die generischen Befehle aufgelistet, die während und nach einem Problem bei TAC-Fällen von den Nexus-Switches erfasst werden.

    Die Befehlsliste kann der Switch-CLI exakt wie aufgelistet ohne Änderungen hinzugefügt werden. Bestimmte Befehle können Fehler verursachen, wenn die entsprechenden Funktionen nicht implementiert sind. Dies ist ein erwartetes Ergebnis und wird keine Probleme verursachen.

    Wenn Sie dem TAC-Fall proaktiv einen Showtech beigefügt haben, können Sie die folgende Liste ignorieren.

    Nexus 3000

    Die Befehlsliste kann der Switch-CLI exakt wie aufgelistet ohne Änderungen hinzugefügt werden. $(SWITCHNAME) wird automatisch durch den Hostnamen ersetzt.

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 5000/6000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 7000

    !SAMMELN SIE DIESE AUSGABEN AUS DEM ADMIN-VDC UND DEM BETREFFENDEN VDC.

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vdc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vdc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 9000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    War dieses Dokument hilfreich?

    FeedbackFeedback

    Cisco kontaktieren

    Dieses Dokument gilt für folgende Produkte.