This window enables you to set up authentication servers that can be used by the WDS access point. If you want an access point to serve as the WDS or as a WDS candidate, you need to configure them as such. You must configure at least one server on the Security: Server Manager window before setting up server groups here.

Server Group List

Click to select which servers you want to edit.

Server Group Name

Enter a unique group name.

Group Server Priorities

Set the priority of servers used for infrastructure and client authentications.

Define Servers

Click the Define Servers link to move to the Security: Server Manager page where you can configure the servers.

Use Group For:

Infrastructure Authentication/
Client Authentication

Select the devices to which the server group authenticates. Choose among infrastructure devices such as access points, clients using EAP authentication, clients using LEAP authentication, clients using MAC-based authentication, or clients using any authentication type. If set up, Any Authentication is the default group, which is applied when none of the other Client Authentication groups (EAP, LEAP, or MAC) apply.

SSID Settings

By default, the server group applies to all SSIDs. To define it for a specified list of SSIDs, click the Restrict SSIDs radio button. Click the Add button to add the desired SSIDs.