You can set up the access point to authenticate
client devices using EAP authentication. If the client is using
EAP authentication, it attempts to authenticate using EAP. If MAC
authentication fails, the access point waits for the client device
to attempt EAP authentication.
EAP Reauthentication
Interval
Click Disable Reauthentication if you don't
want to force reauthentication and the switching of encryption keys.
If you choose to enable it, you can set the timeframe for reauthentication.
Clicking Enable Reauthentication with Interval forces reauthentication
and switching of encryption keys. You can also choose to enable
reauthentication using the interval provided by the authentication
server.
EAP Client Timeout (optional)
The amount of time the access point waits for a
wireless client to reply with EAP authentication information. After
the time expires, the association manager module in the access point
disassociates the client.
TKIP MIC Failure Holdoff Time
Choose if you want to enable the TKIP MIC failure
hold time. If you click on Disable Holdoff,
the hold time is zero. If you enable it and enter the number of
seconds, the access point blocks all TKIP clients on that interface
for the number of seconds entered.
|