Small Business Pro
Security Appliance Configuration Utility
 
 
Device Status
System Info
System Name: Cisco
Primary Firmware Version: 1.1.19
Secondary Firmware Version: 1.1.19
Latest Image Available Configure Automatic Updates
Link to Release notes:
Time at which last query was made:
ProtectLink License Info
  Cisco ProtectLink service has not been activated.
LAN Info
MAC Address: 00:22:6B:18:C1:04
IPv4 Address: 97.0.0.2 / 255.0.0.0
DHCP Server: Disabled
DHCP Relay: Disabled
DHCPv6 Server: IPv6 is disabled
Dedicated WAN Info
MAC Address: 00:22:6B:18:C1:05
IPv4 Address: 100.100.100.61 / 255.255.255.0
Wan State: UP(IPv4)
NAT (IPv4 only): Enabled
IPv4 Connection Type: STATIC
IPv6 Connection Type: IPv6 is disabled
IPv4 Connection State: Connected
IPv6 Connection State: IPv6 is disabled
Link State: LINK DOWN
WAN Mode: Use only single WAN port: Dedicated WAN
Gateway: 100.100.100.100
Primary DNS: 192.168.98.4
Secondary DNS: 202.153.32.2
Optional Port Info
Present Mode: WAN
MAC Address: 00:22:6B:18:C1:06
IPv4 Address: 0.0.0.0 / 0.0.0.0
WAN State: DOWN
NAT (IPv4 Only): Enabled
IPv4 Connection Type: Dynamic IP (DHCP)
Connection State: Not Yet Connected
Link State: LINK DOWN
WAN Mode: Use only single WAN port: Dedicated WAN
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
Wireless Configuration
Country: US
Operating Frequency: 2.4GHz
Mode: ng40-
Channel: 0
Available Access Points
SSID BSSID Profile Name Security Encryption Authentication
abhi-data 00:22:6B:18:C1:08 data WPA2 CCMP PSK
abhi-custom 02:22:6B:18:C1:09 abhi OPEN NONE NONE