|
Table Of Contents
Release Notes for Cisco Unified MeetingPlace for Microsoft Outlook Release 5.4(12.0)
Requirements for Cisco Unified MeetingPlace for Outlook Release 5.4
New and Changed Requirements and Support—Release 5.4(12.0)
New Functionality—Release 5.4(12.0)
Changed Functionality—Release 5.4(12.0)
Installation and Upgrade Information
Installing Cisco Unified MeetingPlace for Outlook Release 5.4 for the First Time
Upgrading to Cisco Unified MeetingPlace for Outlook Release 5.4
Open Caveats—Release 5.4(12.0)
Resolved Caveats—Release 5.4(12.0)
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Obtaining Technical Assistance
Cisco Technical Support & Documentation Website
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Release Notes for Cisco Unified MeetingPlace for Microsoft Outlook Release 5.4(12.0)
Published July 28, 2006
These release notes contain information on new and changed support, new and changed functionality, limitations and restrictions, and open and resolved caveats for Cisco Unified MeetingPlace for Microsoft Outlook Release 5.4(12.0).
You can access the latest software upgrades for all versions of Cisco Unified MeetingPlace for Outlook on the Cisco Software Center website at http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml.
Contents
These release notes discuss the following topics:
•New and Changed Requirements and Support—Release 5.4(12.0)
•New Functionality—Release 5.4(12.0)
•Changed Functionality—Release 5.4(12.0)
•Installation and Upgrade Information
•Cisco Product Security Overview
•Obtaining Technical Assistance
•Obtaining Additional Publications and Information
Introduction
Cisco Unified MeetingPlace for Outlook integrates Cisco Unified MeetingPlace with Microsoft Outlook. It simplifies Cisco Unified MeetingPlace by allowing end users to do the following:
•Receive Cisco Unified MeetingPlace meeting notifications in their Microsoft Outlook e-mail inbox
•Automatically place meetings in their Outlook calendars
•Attend meetings with a single click
•Schedule meetings using the familiar Outlook interface
This product is an add-on to the Cisco Unified MeetingPlace family of products.
System Requirements
This section contains the following information:
•Requirements for Cisco Unified MeetingPlace for Outlook Release 5.4
Requirements for Cisco Unified MeetingPlace for Outlook Release 5.4
System Requirements for Cisco Unified MeetingPlace Release 5.4 contains the most current information on Cisco Unified MeetingPlace for Outlook requirements. The document is available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html.
Compatibility Information
For information about the compatibility of Cisco Unified MeetingPlace for Outlook with other Cisco Unified MeetingPlace components, see the "Cisco Unified MeetingPlace Component Compatibility Matrix" section in the the Installation Planning Guide for Cisco Unified MeetingPlace Release 5.4 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html.
Related Documentation
For descriptions and locations of Cisco Unified MeetingPlace documentation on Cisco.com, see the Documentation Guide for Cisco Unified MeetingPlace. The document is shipped with Cisco Unified MeetingPlace and is available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_documentation_roadmaps_list.html.
New and Changed Requirements and Support—Release 5.4(12.0)
This section contains information about new and changed requirements and support in the Cisco Unified MeetingPlace for Outlook Release 5.4(12.0) time frame only. See the release notes of the applicable version for information on new and changed support with earlier versions of Cisco Unified MeetingPlace for Outlook. Release notes for all versions of Cisco Unified MeetingPlace for Outlook are available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_release_notes_list.html.
There are no new or changed requirements and support for Cisco Unified MeetingPlace for Outlook Release 5.4(12.0).
New Functionality—Release 5.4(12.0)
This section contains information about new functionality for Cisco Unified MeetingPlace for Outlook Release 5.4(12.0) only. See the release notes of the applicable version for information on new functionality in earlier versions of Cisco Unified MeetingPlace for Outlook. Release notes for all versions of Cisco Unified MeetingPlace for Outlook are available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_release_notes_list.html.
Double Delegation
For single and recurring meetings that are scheduled through Outlook, an assistant can be delegated to schedule a meeting and invite participants. An invitee can also delegate an assistant to accept or reject the meeting invitation. This meeting is correctly scheduled in the Outlook calendar.
Changed Functionality—Release 5.4(12.0)
This section contains information about changed functionality for Cisco Unified MeetingPlace for Outlook Release 5.4(12.0) only. See the release notes of the applicable version for information on changed functionality in earlier versions of Cisco Unified MeetingPlace for Outlook. Release notes for all versions of Cisco Unified MeetingPlace for Outlook are available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_release_notes_list.html.
There is no changed functionality for Cisco Unified MeetingPlace for Outlook Release 5.4(12.0).
Installation and Upgrade Information
This section contains the following information:
•Installing Cisco Unified MeetingPlace for Outlook Release 5.4 for the First Time
•Upgrading to Cisco Unified MeetingPlace for Outlook Release 5.4
Installing Cisco Unified MeetingPlace for Outlook Release 5.4 for the First Time
For instructions on installing Cisco Unified MeetingPlace for Outlook, see the "Installing Cisco Unified MeetingPlace for Outlook" chapter of the Administration Guide for Cisco Unified MeetingPlace for Outlook, Release 5.4 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_maintenance_guides_list.html.
Upgrading to Cisco Unified MeetingPlace for Outlook Release 5.4
For instructions on upgrading from Cisco Unified MeetingPlace for Outlook Releases 5.3, 4.3 or 4.2.7, see the "Upgrading Cisco Unified MeetingPlace for Outlook" Appendix of the Administration Guide for Cisco Unified MeetingPlace for Outlook, Release 5.4 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_maintenance_guides_list.html.
Caveats
This section lists Severity 1, 2, and 3 caveats.
You can find the latest caveat information for Cisco Unified MeetingPlace for Outlook version 5.4(12.0)—in addition to caveats of any severity for any release—by using Bug Toolkit, an online tool available for customers to query defects according to their own needs. Bug Toolkit is available at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. For information on using Bug Toolkit, see the "Using Bug Toolkit" section.
Note To access Bug Toolkit, you must be logged on to Cisco.com as a registered user.
This section contains caveat information for Cisco Unified MeetingPlace for Outlook Release 5.4(12.0) only. See the release notes of the applicable version for caveat information for earlier versions of Cisco Unified MeetingPlace for Outlook. Release notes for all versions of Cisco Unified MeetingPlace for Outlook are available at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_release_notes_list.html.
Open Caveats—Release 5.4(12.0)
Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)
Resolved Caveats—Release 5.4(12.0)
Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)
Using Bug Toolkit
To access Bug Toolkit, you need an Internet connection, web browser, and Cisco.com user ID and password. For more detailed information on Bug Toolkit, click Help in any Bug Toolkit window.
To Use Bug Toolkit
Step 1 Open your web browser and go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl.
Step 2 Click the Launch Bug Toolkit link.
Step 3 To look for information about a specific caveat, enter the ID number in the Enter Known Bug ID field.
To view all caveats for a particular Cisco Unified MeetingPlace product, go to the "Search for Bugs in Other Cisco Software and Hardware Products" section, and start typing meetingplace in the Product Name field.
Step 4 Click Next. The Cisco Unified MeetingPlace search page appears.
Step 5 Limit your search by choosing one or more filters. You can choose any or all of the available options:
a. Choose the version of Cisco Unified MeetingPlace:
•Choose the major version for the major releases.
A major release contains significant new features, enhancements, architectural changes, and/or defect fixes.
•Choose the revision for more specific information.
A revision (maintenance) release primarily contains defect fixes to address specific problems, but it may also include new features and/or enhancements.
b. Choose the Features or Components to query; make your selection (for example, choose Outlook) from the "Available" list and click Add to place your selection in the "Limit Search To" list.
c. Enter keywords to search for a caveat title and description, if desired.
Note To make queries less specific, use the All wildcard for the major version/revision, features/components, and keyword options.
d. Choose the Set Advanced Options, including the following items:
•Bug Severity level—The default specifies 1-3.
•Bug Status Group—Check the Fixed check box for resolved caveats.
•Release Note Enclosure—The default specifies Valid Release Note Enclosure.
Step 6 Click Next.
Bug Toolkit returns a list of caveats on the basis of your query.
Note You can modify your results by submitting another query and using different criteria. You can also save your query for future use.
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
The Product Documentation DVD is a comprehensive library of technical product documentation on a portable medium. The DVD enables you to access multiple versions of installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the same HTML documentation that is found on the Cisco website without being connected to the Internet. Certain products also have .PDF versions of the documentation available.
The Product Documentation DVD is available as a single unit or as a subscription. Registered Cisco.com users (Cisco direct customers) can order a Product Documentation DVD (product number DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at this URL:
http://www.cisco.com/go/marketplace/
Ordering Documentation
Registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL:
http://www.cisco.com/go/marketplace/
Nonregistered Cisco.com users can order technical documentation from 8:00 a.m. to 5:00 p.m. (0800 to 1700) PDT by calling 1 866 463-3487 in the United States and Canada, or elsewhere by calling 011 408 519-5055. You can also order documentation by e-mail at tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada, or elsewhere at 011 408 519-5001.
Documentation Feedback
You can rate and provide feedback about Cisco technical documents by completing the online feedback form that appears with the technical documents on Cisco.com.
You can submit comments about Cisco documentation by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
From this site, you will find information about how to:
•Report security vulnerabilities in Cisco products.
•Obtain assistance with security incidents that involve Cisco products.
•Register to receive security information from Cisco.
A current list of security advisories, security notices, and security responses for Cisco products is available at this URL:
To see security advisories, security notices, and security responses as they are updated in real time, you can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you have identified a vulnerability in a Cisco product, contact PSIRT:
•For Emergencies only — security-alert@cisco.com
An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.
•For Nonemergencies — psirt@cisco.com
In an emergency, you can also reach PSIRT by telephone:
•1 877 228-7302
•1 408 525-6532
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been encrypted with PGP versions 2.x through 9.x.
Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
The link on this page has the current PGP key ID in use.
If you do not have or use PGP, contact PSIRT at the aforementioned e-mail addresses or phone numbers before sending any sensitive material to find other means of encrypting the data.
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Cisco Technical Support & Documentation Website
The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—An existing network is down, or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of the network is impaired, while most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief product overviews, key features, sample part numbers, and abbreviated technical specifications for many Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL:
•Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:
http://www.cisco.com/go/marketplace/
•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:
•Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:
•iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:
http://www.cisco.com/go/iqmagazine
or view the digital edition at this URL:
http://ciscoiq.texterity.com/ciscoiq/sample/
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
•Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL:
http://www.cisco.com/en/US/products/index.html
•Networking Professionals Connection is an interactive website for networking professionals to share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:
http://www.cisco.com/discuss/networking
•World-class networking training is available from Cisco. You can view current offerings at this URL:
http://www.cisco.com/en/US/learning/index.html
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.