Each USB port supports a maximum of five supported and nonsupported devices that are connected to the phone. Each device connected to the phone is included in the maximum device count.
For example, your phone can support five USB devices (such as three Cisco Unified IP Color Key Expansion modules, one hub, and one other standard USB device) on the side port and five additional standard USB devices on the back port. Many third-party USB products contain more than one USB device, and thus count as more than one device. For example, a third-party USB device may contain an internal hub and a headset, and thus count as two USB devices.
If you use a USB hub and remove the USB cable from the phone or device port during an active call, it may cause your phone or device to reboot. For more information, contact your system administrator.
Cisco Unified IP Color Key Expansion Module
The Cisco Unified IP Color Key Expansion Module attaches to your Cisco Unified IP Phone 8961, 9951, and 9971 and allows you to add up to 36 extra line appearances or programmable buttons to your phone. The programmable buttons can be set up as phone line buttons, speed-dial buttons, or phone feature buttons.
You can add multiple Expansion Modules to the Cisco Unified IP Phone 9951 and Cisco Unified IP Phone 9971.
Cisco Unified IP Phone model
Number of Expansion Modules supported
1 Expansion Module with 36 lines or buttons
2 Expansion Modules with 72 lines or buttons
3 Expansion Modules with 108 lines or buttons
When multiple Expansion Modules are attached, they are numbered according to the order in which they are connected to the phone. For example:
Key Expansion Module 1 is the Expansion Module closest to the phone.
Key Expansion Module 2 is the Expansion Module in the middle.
Key Expansion Module 3 is the Expansion Module farthest to the right.
The following figure shows a Cisco Unified IP Phone 9971 with three Cisco Unified IP Color Key Expansion Modules.
Cisco Unified IP Color Key Expansion Module Features
The Cisco Unified IP Color Key Expansion Module includes the following features.
Phone screen: Displays the phone number, speed-dial number (or name or other text label), phone service, phone feature, or Privacy assigned to each button.
Icons indicating line status appear similar to, and function the same as, those on the Cisco Unified IP Phone to which the Key Expansion Module is attached.
Lighted Buttons: 18 line buttons. Each button corresponds to one line (as with the Cisco Unified IP Phone). The lights beneath each button indicate the state of the corresponding line as follows:
Line available: light off
Line in use by you: solid green light
Line in use by someone else: solid red light
Line ringing: solid amber light
You have a call on hold: solid green light
Someone else has a call on hold on a shared line: solid red light
Call transfer: solid green light
Call is ringing on an inactive page: solid amber light
Shift Buttons: 2 buttons. Each button corresponds to one page of 18 line keys. The button for page one is labeled with the number 1 and the button for page two is labeled with the number 2. The lights beneath each button indicate the state of the page as follows:
Page is in view: solid green light
Page is not in view: light off
Page is not in view, with one or more alerting calls on the page: solid amber light
Page is in view with one or more alerting calls on the page: solid green light
A call is ringing on an inactive page: flashing amber light
Place Call on Expansion Module
Press the line button on the Expansion Module.
Dial a telephone number.
Before you can set up buttons, contact your system administrator
for the following information to access your Cisco Unified CM User Options web page:
After you have this information, you can configure your
speed-dial numbers or program buttons to access phone services. Phone services
can include, for example, weather, stock quotes, or corporate calendars and
Use the Navigation pad and Select to scroll and select
Key Expansion Module.
brightness, press the right arrow on the Navigation pad.
brightness, press the left arrow on the Navigation pad.
Save to set the brightness, or press
Cancel to exit.
Cisco Unified Video Camera
The Cisco Unified IP Phone 9951 and 9971 support the Cisco Unified Video Camera.
The Cisco Unified Video Camera connects to your Cisco Unified IP Phone and allows you to make a point-to-point video call with another Cisco Unified IP Phone with a Cisco Unified Video Camera attached. If a phone does not have a Cisco Unified Video Camera attached, it can receive only one-way video.
The Cisco Unified IP Phone 8961 does not support the Cisco Unified Video Camera and does not display video.
The following figure shows the Cisco Unified IP Phone 9951 and Cisco Unified Video Camera.
To open the shutter, rotate the lens counterclockwise.
Cisco Unified Video Camera Installation
The Cisco Unified Video Camera can be mounted on your Cisco
Unified IP Phone 9951 or 9971, or it can be mounted on your computer monitor.
If you need help installing or positioning your camera, contact your system
The Enable Video On/Off settings in the phone menu controls the ability to control the video capability of the phone. If you enabl video, you identify the phone as being capable of sending and receiving video. If you disable video, your calls use only audio. Your system administrator controls the ability to use video for calls.
Follow these steps to turn this feature on or off:
Use the navigation pad and Select button to select Preferences.
Press On/Off softkey or Select button to toggle video on or off.
When Auto Transmit Video is on, the camera streams video automatically during calls.
When Auto Transmit is off, video for each call is automatically muted (however, your phone still receives video).
Your system administrator sets up the default softkey (either Show Video or Hide Video) and the default view (video hidden or video displayed).
To hide the video, press
To show the video, press Show Video.
Hide softkeys in full-screen video mode
The softkeys display on the screen when a full-screen video call is enabled. If there is no user activity, the softkeys automatically hide after 10 seconds.
To display the softkeys, do one of the following actions:
Change the state of the video such as by plugging in the camera.
Touch the phone screen (Cisco Unified IP Phone 9971 only).
Press any softkey (Cisco Unified IP Phone 9951 only).
Enable Full Screen Video
Press Full Screen.
Press Minimize to return to the original
Press Mute Video.
Press Unmute Video to unmute the video.
Press Swap to toggle between the full-screen
view and the picture-in-picture (PIP) view.
Swap is only available if you are in
Adjust Picture-in-Picture Position
PIP to move the PIP window to a
different quadrant of the screen.
To disable PIP, press
PIP five times.
(For Cisco Unified IP Phone 9951 and 9971 only.)
The Cisco Unified IP Phone 9951 and 9971 support Bluetooth Class 2 technology when the headsets support Bluetooth. Bluetooth enables low-bandwidth wireless connections within a range of 30 feet (10 meters). The best performance is in the 3- to 6-foot (1- to 2-meter) range.
When using Bluetooth headsets with your phone, these conditions apply:
You can pair and connect up to five Bluetooth headsets to your phone, but the last Bluetooth headset connected becomes the default for use with the phone.
After a Bluetooth headset is connected, turning it off and reconnects it to the phone. The following instructions apply when using the Bluetooth headset:
If you have both a Bluetooth headset and an analog headset attached to the phone, only one type of headset works at any time. Using a USB headset disables both the Bluetooth and analog headset.
Enable the Bluetooth headset to disable the analog headset.
Disable the Bluetooth headset to enable the analog headset.
Unplug the USB headset and then enable either the Bluetooth headset or the analog headset.
For optimum headset coverage, use your Bluetooth headset within 10 ft of the phone, although Bluetooth coverage extends to about 30 ft from the phone.
Your phone supports the Bluetooth Handsfree Profile. If your Bluetooth headset supports these features, you can perform these call functions from your Bluetooth headset:
Answer a call
End a call
Change the headset volume for a call
Hold and Accept
Release and Accept
For more information, see the documentation from your Bluetooth headset manufacturer.
While using Bluetooth headset, there can be potential interference issues. Therefore Cisco recommends that you reduce the proximity of other 802.11b/g devices, Bluetooth devices, microwave ovens, and large metal objects.
For a Bluetooth wireless headset to work, it does not need to be within direct line-of-sight of the phone, but some barriers, such as walls or doors, and interference from other electronic devices, can affect the connection.
The Virtual Desktop Infrastructure (VDI) client attaches to
the Cisco Unified IP Phone 8961, 9951, or 9971. It provides a virtual
environment that allows you to work and collaborate from any device and
location at any time.
You must use the Cisco IP Power Cube on the phone in order to use the VDI client.