Cisco Unified IP Phone 7900 Series

Table Of Contents

Cisco Unified IP Phone 7912G Release Notes for Firmware Release 8.0(4) (SCCP)

Contents

Related Documentation

Installation Notes

Caveats

Using Bug Toolkit

Open Caveats

Resolved Caveats

Obtaining Documentation and Submitting a Service Request

Cisco Unified IP Phone 7912G Release Notes for Firmware Release 8.0(4) (SCCP)

---

January 11, 2008

Use these release notes with the Cisco Unified IP Phone 7912G for firmware release 8.0(4) running on Cisco Unified Communication Manager versions 6.1, 6.0, 5.0, 4.1, 4.0, and 3.3 (SCCP).

Contents

These release notes provide the following information. You might need to notify your users about some of the information provided in this document.

•Related Documentation

•Installation Notes

•Caveats

•Obtaining Documentation and Submitting a Service Request

Related Documentation

Cisco Unified IP Phone Documentation

Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html

Cisco Unified Communications Manager Documentation

Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified Communications Manager Business Edition Documentation

Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

Installation Notes

Before using the Cisco Unified IP Phone 7912G with Cisco Unified Communication Manager release 3.3.2 or later, you must install the latest firmware on all Cisco Unified Communication Manager servers in the cluster. The firmware image name for the Cisco Unified IP Phone 7912G for firmware release 8.0(4) is CP7912080004SCCP080108A.sbin.

---

Note Release 8.0(4) supports both versions of the Cisco Unified IP Phone 7912G (CP-7912G and CP-7912G-A).

---

To install the firmware, follow these steps:

Procedure

---

Step 1 Go to the following URL:

http://www.cisco.com/pcgi-bin/tablebuild.pl/ip-7900ser

Step 2 To download the firmware for the Cisco Unified IP Phone 7912G, click one of the following hyperlinks and follow the prompts:

•Cisco Unified Communications Manager release 4.1 and earlier:

cmterm-7912G-sccp.8-0-4.exe

•Cisco Unified Communications Manager release 5.0 (prior to 5.0(4)):

cmterm-7912-.8.0.4-sccp.cop

•Cisco Unified Communications Manager release 5.0(4) and later:

cmterm-7912-8.0.4-sccp.cop.sgn

Step 3 Go back to the URL shown in Step 1, double-click the following hyperlink, and follow the prompts to download the Readme file, which contains installation instructions for the corresponding firmware:

cmterm-7912G-sccp.8-0-4-Readme.htm

Step 4 Follow the instructions in the Readme file to install the firmware.

---

Caveats

This section contains these topics:

•Using Bug Toolkit

•Open Caveats

•Resolved Caveats

Using Bug Toolkit

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:

•All severity level 1 or 2 bugs.

•Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

•Internet connection

•Web browser

•Cisco.com user ID and password

To use the Software Bug Toolkit, follow these steps:

Procedure

---

Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

Step 2 Log on with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.

---

Open Caveats

There are no open caveats for firmware release 8.0(4).

Resolved Caveats

Table 1 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Phone 7921G using firmware release 8.0(4).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 1 Resolved Caveats for the Cisco Unified IP Phone 7912G for Firmware Release 8.0(4) 

Identifier	Headline and Bug Toolkit Link
CSCsc72408	Sensitive network information available when setting is restricted http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsc72408
CSCsf99283	`Star50' feature is not fully supported on Cisco Unified IP Phone 7912G http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsf99283
CSCsi48004	Data VLAN traffic dropped or discarded with Gigabit Ethernet Network Interface Card (NIC) set to `Auto' http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi48004
CSCsj39542	First TFTP Server IP address vanishes with Cisco Discovery Protocol (CDP) disabled http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj39542
CSCsj94975	IP phone service for international calls not working with latest loads for Cisco Unified IP Phone 7912G http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj94975
CSCsk28864	Cisco Unified IP Phone 7912G fails to predial with speakerphone disabled http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk28864
CSCsl92380	Cisco Unified IP Phone 7912G does not discard `DHCPOFFER' message when in REQUESTING state http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl92380
CSCsl96231	Cisco Unified IP Phone 7912G should not allow XML Services Interface (XSI) applications to control menu settings http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl96231
CSCsl96245	Reset caching of all push (EM) credentials on the Cisco Unified IP Phone 7912G http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl96245
CSCsl96250	Realtime Transport Protocol (RTP) transmit URI request should be rejected when a call is active http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl96250

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

---

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2008 Cisco Systems, Inc. All rights reserved.