Feedback
Contents
- Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR4
- Introduction
- Related Documentation
- Cisco Unified IP Phone 7900 Series Documentation
- Cisco Unified Communications Manager Documentation
- Cisco Business Edition 5000 Documentation
- New and Changed Features
- Features Available with Firmware Release
- Control Default Wallpaper
- Default Audio Path Support
- DSP Audio Enhancement Support
- Hardware Updates
- Features Available with Latest Cisco Unified Communications Manager Device Pack
- DSP Audio Enhancement Support
- Installation
- Installation Requirements
- SCCP Firmware Upgrade Issues
- SIP Firmware Upgrade Issues
- Install Firmware Release on Cisco Unified Communications Manager
- Install Cisco Unified Communications Manager Device Packs
- Cisco Unified IP Phone Expansion Module Firmware Installation
- Cisco Unified IP Phone Expansion Module 7914 Installation
- Cisco Unified IP Phone Expansion Module 7914 Firmware Upgrade Issues
- Install Cisco Unified IP Phone Expansion Module 7914 Firmware
- Cisco Unified IP Phone Expansion Modules 7915 and 7916 Installation
- Cisco Unified IP Phone Expansion Modules 7915 and 7916 Firmware Issues
- Install Cisco Unified IP Phone Expansion Modules 7915 and 7916 Firmware
- Caveats
- Access Cisco Bug Search
- Open Caveats
- Resolved Caveats
- Unified Communications Manager Endpoints Locale Installer
- Cisco IP Phone Firmware Support Policy
- Documentation, Service Requests, and Additional Information
Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR4
Introduction
These release notes support the Cisco Unified IP Phones 7900 Series running SCCP and SIP Firmware Release 9.3(1)SR4.
The following table lists the Cisco Unified Communications Manager release and protocol compatibility for the Cisco Unified IP Phones.
Table 1 Cisco Unified IP Phones, Cisco Unified Communications Manager, and Firmware Release Compatibility Cisco Unified IP Phone Protocol Cisco Unified Communications Manager Cisco Unified IP Phones 7906G, 7911G, 7941G, 7941G-GE, 7961G, 7961G-GE, 7970G, and 7971G-GE
SCCP
Cisco Unified Communications Manager Release 6.0 and later
Cisco Unified CallManager Release 5.1, 5.0, 4.3, 4.2, 4.1, 4.0
Cisco CallManager Release 3.3
Cisco Unified IP Phones 7906G, 7911G, 7941G, 7941G-GE, 7961G, 7961G-GE, 7970G, and 7971G-GE
SIP
Cisco Unified Communications Manager Release 6.0 and later
Cisco Unified CallManager Release 5.1 and 5.0
Cisco Unified IP Phone 7931G
SCCP
Cisco Unified Communications Manager Release 6.0, 6.1, 7.0 and later
Cisco Unified IP Phone 7931G
SIP
Cisco Unified Communications Manager Release 7.0 and later
Cisco Unified IP Phones 7942G, 7945G, 7962G, 7965G, and 7975G
SCCP
Cisco Unified Communications Manager Release 6.x and later
Cisco Unified CallManager Release 5.1, 4.3(2)
Cisco Unified IP Phones 7942G, 7945G, 7962G, 7965G, and 7975G
SIP
Cisco Unified Communications Manager Release 6.x and later
Cisco Unified CallManager Release 5.1
Related Documentation
- Cisco Unified IP Phone 7900 Series Documentation
- Cisco Unified Communications Manager Documentation
- Cisco Business Edition 5000 Documentation
Cisco Unified IP Phone 7900 Series Documentation
Cisco Unified Communications Manager Documentation
Cisco Business Edition 5000 Documentation
See the Cisco Business Edition 5000 Documentation Guide and other publications that are specific to your Cisco Business Edition 5000 release. Navigate from the following URL:
http://www.cisco.com/en/US/products/ps7273/tsd_products_support_eol_series_home.html
New and Changed Features
The following sections describe the new and changed features in this release.
- Features Available with Firmware Release
- Features Available with Latest Cisco Unified Communications Manager Device Pack
Features Available with Firmware Release
Control Default Wallpaper
The Control Default Wallpaper feature allows the administrators to do the following:
- Enable/disable the ability for the user to select a phone background image.
- Specify a default background image for the phone using the Cisco Unified Communications Manager Administration.
Note
The default background image can be applied only if the administrator has disabled the ability for the users to select background images.The feature is supported on the following phones (SCCP and SIP):
- Cisco Unified IP Phone 7906
- Cisco Unified IP Phone 7911
- Cisco Unified IP Phone 7931
- Cisco Unified IP Phone 7941
- Cisco Unified IP Phone 7942
- Cisco Unified IP Phone 7945
- Cisco Unified IP Phone 7961
- Cisco Unified IP Phone 7962
- Cisco Unified IP Phone 7965
- Cisco Unified IP Phone 7970
- Cisco Unified IP Phone 7971
- Cisco Unified IP Phone 7975
Where to find more information
- Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phones 7906G and 7911G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Default Audio Path Support
The Default Audio Path Support feature enables the phone to use the last audio path used.
Note
The last audio path could be either the headset or speakerphone provided the handset is on-hook.The feature is supported on the following phones (SCCP and SIP):
- Cisco Unified IP Phone 7906
- Cisco Unified IP Phone 7911
- Cisco Unified IP Phone 7931
- Cisco Unified IP Phone 7941
- Cisco Unified IP Phone 7942
- Cisco Unified IP Phone 7945
- Cisco Unified IP Phone 7961
- Cisco Unified IP Phone 7962
- Cisco Unified IP Phone 7965
- Cisco Unified IP Phone 7970
- Cisco Unified IP Phone 7971
- Cisco Unified IP Phone 7975
Where to find more information
- Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phones 7906G and 7911G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
DSP Audio Enhancement Support
The Support for DSP Audio Enhancement feature enables the phone to support headset sidetone levels and headset send gains with the following values:The feature is supported on the following phones (SCCP and SIP):Where to find more information
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Hardware Updates
The hardware updates improve the compatibility of internal phone components.
The following table lists the updated hardware versions that require this release.
Phone
Hardware Version
Cisco Unified IP Phone 7942
15.0 and higher
Cisco Unified IP Phone 7945
13.0 and higher
Cisco Unified IP Phone 7962
15.0 and higher
Cisco Unified IP Phone 7965
13.0 and higher
Cisco Unified IP Phone 7975
12.0 and higher
Phones manufactured with these hardware versions must run Firmware Release 9.3(1)SR3 or later. The phone firmware does not allow the phone to be downgraded to releases earlier than Release 9.3(1)SR3.
Features Available with Latest Cisco Unified Communications Manager Device Pack
The following sections describe features in the release which require the new firmware and the latest Cisco Unified Communications Manager Device Pack.
For information about the Cisco Unified IP Phones and the required Cisco Unified Communications Manager device packs, see the following URL:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html
DSP Audio Enhancement Support
The Support for DSP Audio Enhancement feature enables the phone to support headset sidetone levels and headset send gains with the following values:The feature is supported on the following phones (SCCP and SIP):Where to find more information
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
- Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Installation
- Installation Requirements
- SCCP Firmware Upgrade Issues
- SIP Firmware Upgrade Issues
- Install Firmware Release on Cisco Unified Communications Manager
- Install Cisco Unified Communications Manager Device Packs
- Cisco Unified IP Phone Expansion Module Firmware Installation
Installation Requirements
Before you install the firmware release, you must ensure that your Cisco Unified Communications Manager is running the latest device pack.
Important:If your Cisco Unified Communications Manager does not have the required device pack to support this firmware release, the firmware may not work correctly.
For information on the Cisco Unified Communications Manager Device Packs, see http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html.
SCCP Firmware Upgrade Issues
This section applies to the Cisco Unified IP Phones 7975G, 7971G-GE, 7970G, 7965G, 7962G, 7961G-GE, 7961G, 7945G, 7942G, 7941G-GE, 7941G, 7931G, 7911G, and 7906G.
NoteFor all SCCP firmware upgrades from firmware release versions earlier than 8.3(3) to Version 9.3(1) or later, you must first upgrade your phone firmware to an intermediate version (8.3(3) to 8.5(2)) and then upgrade to 9.3(1).
The following upgrade issues apply:
- If you are currently running firmware earlier than 6.0(2) on a Cisco Unified IP Phone and want to upgrade to 8.x(x), you must first install an intervening 7.0(x) load to prevent upgrade failure. Cisco recommends using the most recent 7.0(3) load as the intervening load to avoid lengthy upgrade times.
- If you are currently running firmware 6.0(2) to 7.0(2) on a Cisco Unified IP Phone and want to upgrade to 8.x(x), you can do so directly. However, expect the upgrade to take twice as long as usual.
SIP Firmware Upgrade Issues
For all SIP firmware upgrades from firmware release versions earlier than 8.3(3) to Version 9.3(1) or later, you must first upgrade your phone firmware to an intermediate version (8.3(3) to 8.5(2)) and then upgrade to 9.3(1).
The following upgrade issues apply:
- If you are currently running firmware 6.0(2) to 7.0(2) on a Cisco Unified IP Phone and want to upgrade to 8.x(x), be aware that upgrading will take up to twice as long to complete as usual.
- Device packs are required to enable IP Phones in the Cisco Unified Communications Manager database. For Cisco Unified CallManager 4.2 and earlier, these device packs are required. For Cisco Unified CallManager 4.3 and Cisco Unified Communications Manager 6.0 and later, you must run the device pack and reboot the Cisco Unified Communications Manager server.
Install Firmware Release on Cisco Unified Communications Manager
ProcedureBefore using the Cisco Unified IP Phone 7900 Series Firmware Release 9.3(1)SR4 with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.
Step 1 Go to the following URL: http://www.cisco.com/cisco/software/navigator.html?mdfid=268437892&flowid=5293
Step 2 Choose Cisco Unified IP Phones 7900 Series. Step 3 Choose your phone type. Step 4 Choose one of the following firmware types: Step 5 In the Latest Releases folder, choose 9.3(1)SR4. Step 6 Select one of the following firmware files, click Download Now or Add to cart button, and follow the prompts:
- For Cisco Unified CallManager 4.2 and earlier (firmware files only):
- For Cisco Unified CallManager 4.3:
- For Cisco Unified CallManager 5.0(4) and later:
- For Cisco Unified CallManager 5.0 and later (firmware files only):
- For Cisco Unified CallManager 5.0(4) and later:
Note If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.
Step 7 Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the readme file is in the Additional Information section, which contains installation instructions for the corresponding firmware:
- cmterm-7911_7906-sccp.9-3-1SR4-1-readme.html
- cmterm-7911_7906-sip.9-3-1SR4-1-readme.html
- cmterm-7931-sccp.9-3-1SR4-1-readme.html
- cmterm-7931-sip.9-3-1SR4-1-readme.html
- cmterm-7941_7961-sccp.9-3-1SR4-1-readme.html
- cmterm-7941_7961-sip.9-3-1SR4-1-readme.html
- cmterm-7942_7962-sccp.9-3-1SR4-1-readme.html
- cmterm-7942_7962-sip.9-3-1SR4-1-readme.html
- cmterm-7945_7965-sccp.9-3-1SR4-1-readme.html
- cmterm-7945_7965-sip.9-3-1SR4-1-readme.html
- cmterm-7970_7971-sccp.9-3-1SR4-1-readme.html
- cmterm-7970_7971-sip.9-3-1SR4-1-readme.html
- cmterm-7975-sccp.9-3-1SR4-1-readme.html
- cmterm-7975-sip.9-3-1SR4-1-readme.html
Step 8 Follow the instructions in the readme file to install the firmware.
Install Cisco Unified Communications Manager Device Packs
ProcedureDevice packs are required to enable IP phones in the Cisco Unified Communications Manager database. For information about compatible device packs, see http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/devpack_comp_mtx.html.
For Cisco Unified CallManager 4.2 and earlier, these device packs are required. For Cisco Unified CallManager 4.3 and Cisco Unified Communications Manager 6.0 and later, you must run the device pack and reboot the Cisco Unified Communications Manager server.
To install the device packs, follow these steps.
Step 1 Go to the following URL: http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&flowid=21301
Step 2 Choose your Cisco Unified Communications Manager version. Step 3 Hover over the desired device pack. When the popup window displays, click the Readme link to open the readme file. Step 4 Choose Download or Add to cart for the desired device pack. Step 5 Use the instructions in the readme file to install the updated device pack on the Cisco Unified Communications Manager.
Cisco Unified IP Phone Expansion Module Firmware Installation
The following sections describe the Cisco Unified IP Phone Expansion Module firmware installation.
- Cisco Unified IP Phone Expansion Module 7914 Installation
- Cisco Unified IP Phone Expansion Modules 7915 and 7916 Installation
Cisco Unified IP Phone Expansion Module 7914 Installation
This section describes how to install Cisco Unified IP Phone Expansion Module 7914.
- Cisco Unified IP Phone Expansion Module 7914 Firmware Upgrade Issues
- Install Cisco Unified IP Phone Expansion Module 7914 Firmware
Cisco Unified IP Phone Expansion Module 7914 Firmware Upgrade Issues
The Cisco Unified IP Phones 7906G, 7911G, 7941G, 7941G-GE, 7942G, and 7945G, do not support the Cisco Unified IP Phone Expansion Module 7914.
You can add a maximum of two Expansion Modules to the Cisco Unified IP Phones 7961G, 7961G-GE, 7965G, 7970G, 7971G, and 7975G.
The filename for Cisco Unified IP Phone Expansion Module 7914 indicates that it is for use with SCCP; however, it supports both SCCP and SIP. This applies to IP Phones using Cisco Unified Communications Manager 7.0.
If you are using the Cisco Unified IP Phone Expansion Module 7914, you must upgrade the expansion module to firmware release S00105000400 before using the phone to support relevant features on your expansion module.
Install Cisco Unified IP Phone Expansion Module 7914 Firmware
Procedure
Step 1 Go to the following URL: http://www.cisco.com/cisco/software/navigator.html?mdfid=269065653&i=rm Step 2 Log in to the Tools and Resources Download page. Step 3 Choose the IP Telephony folder by clicking +. Step 4 Choose . Step 5 Choose Cisco Unified IP Phone Expansion Module 7914. Step 6 Choose Skinny Client Control Protocol (SCCP) Software. Step 7 Choose 5.0(4) under the Latest Releases folder. Step 8 To download the firmware for Cisco Unified IP Phone Expansion Module 7914, click the Download Now or Add to cart button and follow the prompts: Step 9 If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file. Step 10 Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the readme file is in the Additional Information section, which contains installation instructions for the corresponding firmware: cmterm-7914-sccp.5-0-4.readme.html
Cisco Unified IP Phone Expansion Modules 7915 and 7916 Installation
This section describes how to install Cisco Unified IP Phone Expansion Modules 7915 and 7916.
- Cisco Unified IP Phone Expansion Modules 7915 and 7916 Firmware Issues
- Install Cisco Unified IP Phone Expansion Modules 7915 and 7916 Firmware
Cisco Unified IP Phone Expansion Modules 7915 and 7916 Firmware Issues
Before you use the Cisco Unified IP Phone Expansion Module 7916, you must load the expansion module with firmware release B016-1-0-4-2 before using the phone to support relevant features on your expansion module.
Before you use the Cisco Unified IP Phone Expansion Module 7915, you must load the expansion module with firmware release B015-1-0-4-2 before using the phone to support relevant features on your expansion module.
The Cisco Unified IP Phones 7962G, 7965G, and 7975G support the Cisco Unified IP Phone Expansion Modules 7915 and 7916. You can add a maximum of two expansion modules to these phones.
Install Cisco Unified IP Phone Expansion Modules 7915 and 7916 Firmware
Procedure
Caveats
Access Cisco Bug Search
ProcedureKnown problems (bugs) are graded according to severity level. These release notes contain descriptions of the following:
You can search for problems by using the Cisco Bug Search.
Open Caveats
The following table lists severity 1, 2, and 3 defects that are open for the Cisco Unified IP Phones that use Firmware Release 9.3(1)SR4.
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL that is shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, the table reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in Access Cisco Bug Search.
Table 2 Open Caveats for Firmware Release 9.3(1)SR4 Identifier Description MIDP Mutable image is not displayed on a 7941
phone stuck during PFS upgrading/downgrading
FR23:When pull out the net,use a https connection, wait no time out.
IDH: Cisco IP phone 7941 does not send out CDP during bootup
LSC install/upgrade failed or cancelled when CCM Failover/Fallback
TFTP error on the phone status, when testing with 200k endpoints.
Device occasionally hard reset due to segmentation error
Blowing to the headset microphone brings some noise.
Customized ring tones are not ringing for 79XX series Phones.
wrong behavior of "<<" in edit dial state.
Call does not disconnect after getting reorder - SIP Phone
Audio issue with ilbc codec - 7911 phone
Phones are blocked in "Configuring ip" after longtime upgrade/downgrade.
sip phone : 'CFwdAll' button work as create call in PLAR feature
ETSGJ-CH: 7961 IP Phone restarted unexpectedly while debugging thru SSH
PD always display login UI when you logout successfully
7965 one way audio using Any connect IOS VPN
894X/79XX phones advertise URI support in CURT incorrectly.
phone download the XMLDefault.xml after the tftp service get down
Resolved Caveats
The following table lists severity 1, 2, and 3 defects that are resolved for the Cisco Unified IP Phones that use Firmware Release 9.3(1)SR4.
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL that is shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, the table reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in Access Cisco Bug Search.
Table 3 Resolved Caveats for Firmware Release 9.3(1)SR4 Identifier Description Placeholder for TNP Sidetone/Send Gain Audio Server Change
796x/4x phones not passing correct Device IDs to switch port via CDP
'BACK' is not displayed in English when locale switched to English
79XX phones do not display Caller ID if Remote-Party-ID has FQDN
phone load issue on 7945 with new hardware
3rd Gen phone have issues returning info from URL like CGI/SettingsInfo
Out of bound RTP port (32768) is chosen by 7970 and causes one way audio
Https results in XML parsing error in 7961/62
EAP-TLS on phone fails leading to phone freeze with Load 9-3-1SR2
7911 - Intermittently some SCCP phones automatically mute calls
SIP TNP Phones generate coredump due to memory leak at JNI layer
Interrupted g729 audio stream results in a hiss/artifact in audio
Phone reboots after the call is connected.
SIP phones have a max to and from tag of 64 characters
em pin change displayed in plain text in phone console logs
7945/7965 EHook headset beeping when line set to flash only
7941/61s send malformed SCCP message to CUCM causing them to be reset
EAP-TLS on phone fails leading to phone freeze with Load 9-3-1SR2
3 to 11 second time delay on IP Phones
Group picture display is missing on 7900 phones
Preventing users from Changing background image on TNP phones
Arabic UAE locale language: Corporate directory search reloads phones
79XX phones autodial number from directory when going offhook
debug executable left on the TNP phone
7962 reassembles incorrectly EAP-TLS certificate = 802.1x auth fail
7931 Peer Firmware Sharing always disabled
The default background image for TNP should be changed from CUCM
TNP phone should support default audio path
Secure SIP 7942/7962 Phones Unregister when BLF with Call List Enabled
Unified Communications Manager Endpoints Locale Installer
By default, Cisco IP Phones are set up for the English (United States) locale. To use the Cisco IP phones in other locales, you must install the locale-specific version of the Unified Communications Manager Endpoints Locale Installer on every Cisco Unified Communications Manager server in the cluster. The Locale Installer installs the latest translated text for the phone user interface and country-specific phone tones on your system so that they are available for the Cisco IP Phones.
To access the Locale Installer required for a release, access http://software.cisco.com/download/navigator.html?mdfid=286037605&flowid=46245, navigate to your phone model, and select the Unified Communications Manager Endpoints Locale Installer link.
For more information, see the "Locale Installer" section in the Cisco Unified Communications Operating System Administration Guide.
Note
The latest Locale Installer may not be immediately available; continue to check the website for updates.
Cisco IP Phone Firmware Support Policy
For information on the support policy for Cisco IP Phones, see http://www.cisco.com/en/US/partner/products/hw/phones/ps379/products_tech_note09186a0080c1fa9f.shtml.
Documentation, Service Requests, and Additional Information
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
