|
Table Of Contents
Using Cisco Unified Communications Manager Upgrade Utility 4.3(8)
Understanding How the Utility Works
Obtaining Documentation, Obtaining Support, and Security Guidelines
Cisco Product Security Overview
Using Cisco Unified Communications Manager Upgrade Utility 4.3(8)
The Cisco Unified Communications Manager Upgrade Utility, a nonintrusive tool, detects the health of the servers in the Cisco Unified Communications Manager cluster before you perform an upgrade to Cisco Unified Communications Manager.
This version of Cisco Unified Communications Manager Upgrade Utility replaces the previous versions of Cisco Unified CallManager Upgrade Utility:
Cisco Unified Communications Manager Upgrade Utility 4.3(8) adds support for multiple version upgrades. Use Cisco Unified Communications Manager Upgrade Utility, version 4.3(8) or later, to detect the health of your servers before you upgrade to Cisco Unified Communications Manager (formerly known as Cisco Unified CallManager) Release 3.3(5) or later. For information on supported upgrade paths, refer to the Cisco Unified Communications Manager Software Compatibility Guide at the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_device_support_tables_list.html
Caution This utility identifies problems that could cause the Cisco Unified Communications Manager upgrade to fail. This utility does not correct the problems. You must perform the corrective action for the problem that the utility identifies.
Cisco strongly recommends that all servers in the cluster pass the validation before you upgrade any servers.
Contents
This document contains the following topics:
•Understanding How the Utility Works
Conventions
Consider the following documentation conventions as you review this upgrade document.
Blue Text—To quickly navigate to a section or URL, click text that appears in blue.
Note Reader, take note. Notes contain helpful suggestions or references to material not covered in the publication.
Caution Reader, be careful. You may do something that could result in equipment damage or loss of data.
Timesaver Reader, this tip saves you time as you perform the procedure.
Related Documentation
Use the following documentation in conjunction with this document. Click the URLs in Table 1 to navigate to the appropriate documentation.
Table 1 Quick Reference for URLs
Related Documentation and Software URL and Additional InformationOperating system documentation and Virtual Network Computing (VNC) documentation
(not readme documentation)
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_installation_guides_list.html
Cisco Unified Communications Manager Software Compatibility Guide
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_device_support_tables_list.html
Cisco Unified Communications Manager documentation
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Cisco Unified Communications Applications Backup and Restore documentation
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
Service releases and readme documentation
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_release_notes_list.html
Note The operating system and SQL Server support patches post on the voice products operating system cryptographic software page. You can navigate to the site from the Cisco Unified Communications Manager software page.
Related Cisco IP telephony application documentation
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Before You Begin
Before you run the utility, Cisco strongly recommends that you perform the following tasks.
•Back up your Cisco Unified Communications Manager servers. To obtain the backup utility documentation, go to http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html.
•Review the "Understanding How the Utility Works" section.
•Verify that your server login account has Administrative privileges to run the utility.
Understanding How the Utility Works
Before you perform an upgrade to a Cisco Unified Communications Manager version, download and run the latest version of the Cisco Unified Communications Manager Upgrade Utility, a nonintrusive tool that detects the health of the servers in the Cisco Unified Communications Manager cluster without changing the state of the system.
To verify that the server meets the minimum requirement for the Cisco Unified Communications Manager version to which you are upgrading, refer to the Cisco Unified Communications Manager Server Support Matrix. To obtain the most recent version of this document, go to
http://www.cisco.com/en/US/partner/products/hw/voiceapp/ps378/prod_brochure_list.html
Caution Your server login account must have Administrative privileges to run the utility. You may log in to the server by using the Administrator username and password.
Before you begin the upgrade on the publisher database server, you must run the utility on all servers in the cluster. If any server fails the validation process, investigate and correct the problem(s) before you begin the upgrade on the publisher database server. After you correct the problem(s), run the utility again before you upgrade.
You can run the utility on only one server at a time.
Cisco strongly recommends that you run this utility during a scheduled, maintenance window.
The utility runs the validation modules that display in Table 2. The utility runs some validation modules only on publisher servers, some validation modules only on subscriber servers, and some modules on both publisher and subscriber servers. As soon as the utility identifies a problem with a module, the utility begins checking the next module. After the utility performs the entire validation process, review the validation list in the Summary window for modules that fail the validation or for modules that provide warnings.
Table 2 Validation Checks That the Utility Performs
Module Applicable Server Additional Information The utility performs the following validations for servers that are running Cisco CallManager Release 3.1 or 3.2.Backup File Integrity Validation
This check occurs on the publisher database server only.
The Upgrade Utility verifies the following items:
•The existence of the chosen MCS.sti file
If the file does not exist after you click Select, a message displays.
•The backup file size
•The backup utility version that is used to create the file
If you do not want the utility to validate the backup file, click the Skip button; a dialog box prompts you to skip the backup file validation.
If you do not choose a backup file for the utility to validate, the utility assigns a Skipped status to the module.
OS Flag Files Validation
This check occurs on the publisher database and subscriber servers.
The utility verifies that the Stirnw.flg and Stisys.inf files exist.
Database Location Setting Validation
This check occurs on the publisher database and subscriber servers.
The utility performs a check of your Cisco Unified CallManager registry (specifically, dbconnection0) to verify that the registry points to the proper database.
Resource Validation
This check occurs on the publisher database and subscriber servers.
This utility verifies that the system has enough physical memory.
The utility performs the following validations for servers that are running Cisco Unified CallManager Release 3.3, 4.0, 4.1, 4.2, or Cisco Unified Communications Manager 4.3Software Version Validation
This check occurs on the publisher database and subscriber servers.
The utility validates the Cisco-provided operating system/related service releases and SQL Server/related service releases.
For information on minimum software requirements, refer to the Cisco Unified Communications Manager Software Compatibility Guide. To obtain the most recent version of this document, see Table 1.
The Upgrade Utility checks only for software applications that this document lists. If you run other applications in the cluster or other applications on the servers, verify that compatibility exists between Cisco Unified CallManager and the application before you upgrade. Failing to do so may cause applications to not work as expected.
Database Location Setting Validation
This check occurs on the publisher database and subscriber servers.
The utility performs a check of your Cisco Unified CallManager registry (specifically, dbconnection0) to verify that the registry points to the proper database.
DC Directory HealthCheck Validation
This check occurs on the publisher database and subscriber servers.
The utility validates whether Cisco Unified CallManager is integrated with DC Directory. This utility validates the DC Directory connection and the DC Directory configuration containers.
Security Settings Validation
This check occurs on the publisher database and subscriber servers.
The utility validates the following policies and accounts:
•Password policies, including Enforce Password History, Minimum Password Age, and Minimum Password Length
Verify that these policies are set to default.
•Account lockout policies
Verify that these policies are set to default.
•Local system accounts for all Administrator accounts
Verify that the local system accounts for all Administrator accounts are set to Never Expire.
Note The utility validates the settings of the publisher database server even when it is running on the subscriber server.
Cisco Unified CallManager Database Replication Validation
This check occurs on the publisher database server.
The publisher database server upgrade requires that all call-processing processes that the server handles fail over to the configured subscriber servers. Database replication must exist prior to the upgrade, so failover occurs.
This utility verifies the database replication status for all subscriber servers in the cluster. This utility validates that the database contains the latest information about the system. Validation results include Running, Idle, Failed, or Succeeded.
Hostname Resolution Validation
This check occurs on the subscriber database server only.
The utility validates that the server hostname resolves to a valid IP address.
Password Validation
This check occurs on the subscriber database server only
The utility performs a check on each subscriber database server to verify that the Administrator password on the subscriber database servers matches the Administrator password on the publisher database server.
Domain Validation
This check occurs on the publisher database and subscriber servers.
The utility verifies that the system is not part of a domain.
Resource Validation
This check occurs on the publisher database and subscriber servers.
This utility verifies that the system has enough physical memory.
Installing the Utility
Caution If you choose to do so, you can use Virtual Network Computing (VNC) to install and run this utility. To obtain the most recent version of this document, go to
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_installation_guides_list.html.
Do not use Integrated Lights Out (ILO) or Terminal Services to install or run this utility; Cisco installs Terminal Services, so Cisco Technical Assistance Center (TAC) can perform remote management and configuration tasks.
Perform the following procedure to install the utility:
Procedure
Step 1 Go to this URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240
Step 2 Type your Cisco.com User Name: and Password: in the text boxes, then click the Log In button.
Step 3 Choose IP Telephony > Call Control > Cisco Unified Communications Manager (CallManager) > Cisco Unified Communications Manager Version 7.0.
Step 4 Click the Unified Communications Manager/CallManager Upgrade Assistant link.
Step 5 Browse the folders and click the 4.3(8) link.
Step 6 Click the CCMUpgdAsstInstall.4-3-8.exe link and click the DOWNLOAD button. Follow the prompts and provide the required information to download the software.
Step 7 Download the Upgrade Utility file to your hard drive.
Tip For this utility, Cisco uses the file format, CCMUpgdAsstInstall_<utility version>.exe.
Step 8 Remember the location where you save the downloaded file.
Step 9 To begin the installation, double-click the download file.
Note If Cisco Security Agent (CSA) is enabled, a prompt asks you if you are installing software. To continue the installation, click Yes to All.
The Preparing to Install window displays.
Step 10 The Welcome window displays; click Next.
The license agreement displays.
Step 11 Review the license agreement, click the I accept the terms in the license agreement radio button to accept the terms, and click Next to proceed with the installation.
Step 12 Verify the customer information. Click Next.
The Ready to Install window displays. Click Install.
Step 13 When the InstallShield Wizard Complete window displays, click Finish.
Running the Utility
Tip You can run the utility on only one server at a time.
Running this utility takes approximately 1 to 60 (or more) minutes for the publisher database server. The time that it takes on the publisher database server depends on the size of the backup file.
The utility takes approximately 1 to 5 minutes for each subscriber server.To run the utility, perform the following procedure.
Procedure
Step 1 Choose Start > Programs > Cisco Systems, Inc > CallManager Upgrade Utility.
Step 2 The Welcome window displays. Review the information in the window and click Next.
Step 3 The Choose a Cisco Unified CallManager Version displays. Choose the Cisco Unified CallManager version to which you are interested in upgrading and click Next.
Step 4 The Upgrade Utility Confirmation window displays with a list of checks that the utility performs. Review the information in the window and click Next.
During the validation process, the Cisco Unified CallManager Upgrade Utility Status windows displays. An "x" indicates that the validation failed; a check indicates that the validation succeeded; an arrow indicates the validation task that the utility currently performs.
Step 5 In the Upgrade Utility Summary window, the validation results display. To interpret the results, see the "Interpreting the Results" section.
Caution Clicking Finish closes the window. Review the results before you click Finish. If you close the window, you can obtain the results from the log file; see the "Obtaining the Log File" section.
Step 6 After you fix the problems that the utility identifies, run the utility again on every server in the cluster before you begin the upgrade.
Interpreting the Results
The validation results display in the Upgrade Utility Summary window. At the top of the window, a report summarizes the results for all modules and displays which modules failed, which modules produced warnings, and which modules passed. A link to the folder that contains all log files, including the Upgrade Utility Summary report, displays also.
To identify a problem with the failed validation module, review the following information that displays in the Summary window:
•The first link points to the log file that specifies the error or warning.
Click the first link and search for the error or warning; for example, ERR: <message> or WARN: <message>.
•The second link points to the corrective action file that describes the log file error message and recommends the corrective action.
To open the corrective action file, click the second link. Search the corrective action file for the error message that is noted in the log file. Review the description and corrective action.
Caution After you correct all problems that the utility identifies, Cisco strongly recommends that you run the utility again on every server in the cluster before you begin the upgrade.
Obtaining the Log File
You can obtain the results from the utility in the following directory:
C:\Program Files\Common Files\Cisco\Logs\UPGRADEASST<date> (for example, UPGRADEASST-05-15-2003_13.47.58)
To access the log file, click the Summary file.
Tip A link to the log file displays in the Summary window for every failed validation module. To access the log file, click the link in the Summary window.
The Summary.html file, which is the Upgrade Utility Summary report, provides the exact same information that displays in the Upgrade Utility Summary window.
Each time that you run the utility, the utility creates a new log folder and new set of log files. The utility does not remove the log files, even if you uninstall the utility. You erase the log files when you reimage the server or manually delete the files.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Cisco Product Security Overview
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
Copyright © 2009. Cisco Systems, Inc. All rights reserved.