|
Table Of Contents
Release Notes for Cisco Unity Connection Release 1.2(1) Service Release 1
System Requirements, and Supported Hardware and Software
Determining the Software Version
Cisco Personal Communications Assistant
New and Changed Requirements and Support—Release 1.2(1) SR1
Software Qualified for Use on Cisco Unity Connection User Workstations
Installation and Upgrade Information
Downloading Software for Cisco Unity Connection 1.2(1) Service Release 1
Downloading the Server Updates Wizard
Downloading and Installing Cisco Unity Connection 1.2(1) Service Release 1
Resolved Caveats—Release 1.2(1) Service Release 1
Obtaining Documentation, Obtaining Support, and Security Guidelines
Release Notes for Cisco Unity Connection Release 1.2(1) Service Release 1
Revised March 5, 2008These release notes contain information on downloading software, new and changed support, new and changed functionality, and open and resolved caveats for Cisco Unity Connection Release 1.2(1) SR1.
Note Items in release notes may be added, or revised to correct or clarify information after the initial publication date (the date the software was released). When an item has been changed, the phrase "Added <date>" or "Revised <date>" is included in the text of the item.
Note You can use the Cisco Voice Technology Group Subscription tool to be notified by e-mail of any Cisco Unity Connection software updates. To subscribe, go to the Cisco Voice Technology Group Subscription Tool page at http://www.cisco.com/pcgi-bin/Software/Newsbuilder/Builder/VOICE.cgi.
Contents
These release notes contain the following sections:
•System Requirements, and Supported Hardware and Software
•New and Changed Requirements and Support—Release 1.2(1) SR1
•Installation and Upgrade Information
•Obtaining Documentation, Obtaining Support, and Security Guidelines
System Requirements, and Supported Hardware and Software
Cisco Unity Connection 1.x System Requirements, and Supported Hardware and Software contains the most current information on Connection requirements, and supported hardware and software. The document is on Cisco.com at http://www.cisco.com/en/US/products/ps6509/prod_installation_guides_list.html.
Compatibility Information
The following documents list the most current version combinations qualified for use with Cisco Unity Connection:
•Compatibility Matrix: Cisco Unity Connection and the Software on User Workstations
•SCCP Compatibility Matrix: Cisco Unity Connection, the Cisco Unity-CM TSP, Cisco CallManager, and Cisco CallManager Express
•SIP Trunk Compatibility Matrix: Cisco Unity Connection and Cisco CallManager
The documents are available on Cisco.com at http://www.cisco.com/en/US/products/ps6509/products_device_support_tables_list.html.
Determining the Software Version
This section contains procedures for determining the version in use for the following software:
•Cisco Personal Communications Assistant
Cisco Unity Connection
To Determine the Cisco Unity Connection Version by Using Cisco Unity Connection Administration
Step 1 In Cisco Unity Connection Administration, scroll to the bottom of the navigation bar.
Step 2 Click About. The Connection version is displayed below "Cisco Unity Connection."
You can also use the Cisco Unity Connection Server Status utility to determine the version. This is useful when Connection is not running.
To Determine the Cisco Unity Connection Version by Using the Cisco Unity Connection Server Status Utility
In the Cisco Unity Connection Server Status utility, click the Server Status tab. The Connection version is displayed in the Version field.
Cisco Unity-CM TSP
To Determine the Cisco Unity-CM TSP Version
Step 1 Browse to the Windows\System32 directory.
Step 2 Right-click AvSkinny.tsp, and click Properties.
Step 3 In the Properties window, click the Version tab.
Step 4 In the Item Name list, click Product Version. The Cisco Unity-CM TSP version is displayed in the Value window.
Cisco Personal Communications Assistant
To Determine the Cisco Personal Communications Assistant (PCA) Version
Step 1 Log on to the Cisco PCA.
Step 2 On the Cisco PCA Home page, click About in the upper right corner. (The link is available on every Cisco PCA page.)
The Cisco Unity Connection version is displayed. The Cisco PCA version is the same as the Connection version.
Related Documentation
For descriptions and URLs of Cisco Unity Connection documentation on Cisco.com, see the Cisco Unity Connection Documentation Guide. The document is shipped with Cisco Unity Connection and is available at http://www.cisco.com/en/US/products/ps6509/products_documentation_roadmaps_list.html.
New and Changed Requirements and Support—Release 1.2(1) SR1
This section contains information about new and changed requirements and support in this release time frame only. Refer to the release notes of the applicable version for information on new and changed support with earlier versions of Cisco Unity Connection. Release notes for all versions of Cisco Unity Connection are available at http://www.cisco.com/en/US/products/ps6509/prod_release_notes_list.html.
Software Qualified for Use on Cisco Unity Connection User Workstations
The following software has been qualified for use on Cisco Unity Connection user workstations:
•Firefox 2.0 on all operating systems
•Internet Explorer 7.0 on all supported Windows operating systems
•Microsoft Outlook 2007 for IMAP users
For the most current version combinations of software qualified for use on user workstations—including software qualified since the release of Cisco Unity Connection version 1.2(1)—refer to Compatibility Matrix: Cisco Unity Connection and the Software on User Workstations at http://www.cisco.com/en/US/products/ps6509/products_device_support_tables_list.html.
Installation and Upgrade Information
•Downloading Software for Cisco Unity Connection 1.2(1) Service Release 1
Downloading Software for Cisco Unity Connection 1.2(1) Service Release 1
This section contains procedures for downloading the Server Updates wizard (which installs Microsoft updates that are required with Connection), and for downloading an image of the Cisco Unity Connection 1.2(1) Service Release 1.
Downloading the Server Updates Wizard
The Server Updates wizard installs the latest Microsoft updates that are required with Cisco Unity Connection and the latest version of Cisco Security Agent for Cisco Unity.
For a list of updates that are installed, refer to Software Installed by the Cisco Unity Connection Server Updates Wizard at http://www.cisco.com/en/US/products/ps6509/prod_installation_guides_list.html.
To Download the Server Updates Wizard
Step 1 On a computer with a high-speed Internet connection, go to the Microsoft Updates for Cisco Unity Software Download page at http://www.cisco.com/pcgi-bin/tablebuild.pl/unity_msft_updates.
Note To access the software download page, you must be logged on to Cisco.com as a registered user.
Step 2 Confirm that the computer you are using has sufficient hard disk space for the downloaded file and for the extracted wizard. You will need approximately two times the total of the download file size. (The download file sizes appear on the Microsoft Updates for Cisco Unity Software Download page.)
Step 3 Click the name of the Server Updates wizard file.
Step 4 Follow the on-screen prompts to complete the download.
Step 5 Extract the Server Updates wizard to the hard disk:
a. In Windows Explorer, double-click the file.
b. In WinZip, specify the directory to which the wizard will be extracted.
Step 6 Burn a CD for the wizard, and label it "Server Updates wizard <date>."
If you have a Server Updates wizard CD shipped from Cisco, set it aside so you do not accidentally use the wrong CD during installation or upgrade.
Step 7 When you are done extracting the wizard, delete the downloaded .exe file to free disk space.
Downloading and Installing Cisco Unity Connection 1.2(1) Service Release 1
To Download Service Release 1
Step 1 On a computer with a high-speed Internet connection, go to the Cisco Unity Connection Software Download page at http://www.cisco.com/pcgi-bin/tablebuild.pl/unityconnection.
Note To access the software download page, you must be logged on to Cisco.com as a registered user.
Step 2 Confirm that the computer you are using has sufficient hard disk space for the downloaded file and for the extracted software. You will need approximately two times the total of the download file size. (The download file sizes appear on the Cisco Unity Connection Software Download page.)
Step 3 Click the name of the Cisco Unity Connection 1.2(1) Service Release 1 file.
Step 4 Follow the on-screen prompts to complete the download.
Step 5 Extract the service release to the hard disk:
a. In Windows Explorer, double-click the file.
b. In WinZip, specify the directory to which the wizard will be extracted.
Step 6 Burn a CD for the service release, and label it "Cisco Unity Connection Service Release 1."
Step 7 When the service release has been extracted, delete the downloaded .exe file to free disk space.
After you have installed and configured all software on the Cisco Unity Connection server and the voice recognition server, if any, install Service Release 1 on both servers.
Caveats
This section lists Severity 1, 2, and 3 caveats.
You can find the latest caveat information for Cisco Unity Connection version 1.2(1) Service Release 1 —in addition to caveats of any severity for any release—by using Bug Toolkit, an online tool available for customers to query defects according to their own needs. Bug Toolkit is available at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl.
Note To access Bug Toolkit, you must be logged on to Cisco.com as a registered user.
This section contains caveat information for Cisco Unity Connection Release 1.2(1) Service Release 1 only. Refer to the release notes of the applicable version for caveat information for earlier versions of Cisco Unity Connection. Release notes for all versions of Cisco Unity Connection are available at http://www.cisco.com/en/US/products/ps6509/prod_release_notes_list.html.
Resolved Caveats—Release 1.2(1) Service Release 1
Revised March 5, 2008Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)
Troubleshooting Information
Cisco Unity Connection troubleshooting information can be found in the Cisco Unity Connection Troubleshooting Guide, Release 1.x at http://www.cisco.com/en/US/products/ps6509/prod_troubleshooting_guides_list.html.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.