|
Table Of Contents
Integration Guides for Cisco Unity Connection 1.2
Integration Guides for Cisco Unity Connection 1.2
Published June 19, 2006
You can use the integration guides for Cisco Unity Connection 1.1 for Cisco Unity Connection 1.2 phone system integrations.
Note that the name of the model and the port group template, which you select in the Phone System Integration Wizard, may differ depending on the version of Cisco Unity Connection as shown in the following table.
For instructions on integrating a supported phone system with Cisco Unity Connection 1.2, see the applicable Cisco Unity Connection 1.1 or Cisco Unity Connection 1.2 integration guide at http://www.cisco.com/en/US/products/ps6509/products_installation_and_configuration_guides_list.html.
For a list of the phone systems with which Cisco Unity Connection 1.2 integrates, see the "Supported Phone System Integrations" section of the Cisco Unity Connection 1.x System Requirements, and Supported Hardware and Software at http://www.cisco.com/en/US/products/ps6509/prod_installation_guides_list.html.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.