Table Of Contents
Configuring Call Home
Call Home Features
Call Home Configuration Process
Cisco AutoNotify
Configuring the Call Home Function
Assigning Contact Information
Configuring Destination Profiles
Configuring E-Mail Options
Configuring General E-Mail Option
Configuring SMTP Server and Ports
Enabling or Disabling Call Home
Testing Call Home Communication
Displaying Call Home Information
Default Settings
Event Triggers
Call Home Message Severity Levels
Message Contents
Configuring Call Home
Call Home provides e-mail-based notification of critical system events. A versatile range of message formats are available for optimal compatibility with pager services, standard e-mail, or XML-based automated parsing applications. Common uses of this feature may include direct paging of a network support engineer, e-mail notification to a Network Operations Center, and utilization of Cisco AutoNotify services for direct case generation with the Technical Assistance Center.
This chapter provides configuration and messaging details on the Call Home feature. It includes the following sections:
•Call Home Features
•Call Home Configuration Process
•Cisco AutoNotify
•Configuring the Call Home Function
•Assigning Contact Information
•Configuring Destination Profiles
•Configuring E-Mail Options
•Enabling or Disabling Call Home
•Testing Call Home Communication
•Displaying Call Home Information
•Default Settings
•Event Triggers
•Call Home Message Severity Levels
•Message Contents
Call Home Features
The Call Home functionality is available directly through the Cisco MDS 9000 Family. It provides multiple Call Home profiles, each with separate potential destinations.
The Call Home function can even leverage support from Cisco Systems or another support partner. Flexible message delivery and format options make it easy to integrate specific support requirements.
The Call Home feature offers the following advantages:
•Fixed set of predefined alerts and trigger events on the switch.
•Automatic execution and attachment of relevant command output.
•Multiple message format options:
–Short Text—Suitable for pagers or printed reports.
–Plain Text—Full formatted message information suitable for human reading.
–XML—Matching readable format using Extensible Markup Language (XML) and Document Type Definitions (DTDs) named Messaging Markup Language (MML). The MML DTD is published on the Cisco Connection Online (CCO) website at http://www.cisco.com/. The XML format enables communication with the Cisco Systems TAC group.
•Multiple concurrent message destinations. Up to 50 E-mail destination addresses are allowed for each format type.
•Message categories include system, environment, switching module hardware, supervisor module, hardware, inventory, and test.
Call Home Configuration Process
The actual configuration of Call Home depends on how you intend to use the feature. Some points to consider include:
•E-mail server and at least one destination profile must be configured. The destination profile(s) used depends on whether the receiving entity is a pager, email, or automated service such as Cisco AutoNotify.
•The contact name (SNMP server contact), phone, and street address information must be configured before Call Home is enabled. This is required to determine the origin of messages received.
•The Cisco MDS 9000 switch must have IP connectivity to an E-mail server for the feature to operate.
•If Cisco AutoNotify is used, an active service contract must cover the device being configured.
To configure Call Home, follow these steps:
Step 1 Configure the Call Home function (see the "Configuring the Call Home Function" section).
Step 2 Assign contact information (see the "Assigning Contact Information" section).
Step 3 Configure destination profiles (see the "Configuring Destination Profiles" section).
Step 4 Enable or disable Call Home (see the "Enabling or Disabling Call Home" section).
Step 5 Test Call Home messages (see the "Testing Call Home Communication" section).
Cisco AutoNotify
For those who have service contracts directly with Cisco Systems, automatic case generation with the Technical Assistance Center is possible through registration with the AutoNotify service. AutoNotify provides fast time to resolution of system problems by providing a direct notification path to Cisco customer support. To register, the following items are required:
•The SMARTnet contract number covering your MDS 9000 family switch.
•Your name, company address, your email address, and your CCO ID.
•The serial number of your Cisco MDS 9000 Family switch. This can be obtained by looking at the serial number label on the back of the switch (next to the power supply), or by executing the operating system show sprom backplane 1 command.
•The exact product number of your Cisco MDS 9000 Family switch. This can be obtained by executing the same operating system command as above. For example, some valid product numbers include: DS-C6509 and DS-C9216-K9
To configure a Cisco MDS 9000 Family switch to use AutoNotify service, an XML destination profile must be configured to send messages to Cisco. Specific setup, activation, and email address information is found on the Cisco.com web site at: http://www.cisco.com/warp/public/cc/serv/mkt/sup/tsssv/opmsup/smton/anoti_ds.htm
Note The AutoNotify feature requires several Call Home parameters to be configured, including certain contact information, email server, and an XML destination profile as specified in the Service Activation document (http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/service/serv332/ccmsrvs/sssrvact.htm). The contract-id, customer-id, site-id, and switch-priority parameters are not required by the AutoNotify feature. They are only intended to be used as additional information by Cisco customers and service partners.
Configuring the Call Home Function
To enter the Call Home submode, follow these steps:
|
Command
|
Purpose
|
Step 1
|
|
Enters configuration mode.
|
Step 2
|
|
Enters Call Home submode.
|
Step 3
|
switch(config-callhome)# ?
contract-id Service contract id of the customer
destination-profile Configure destination profiles
email-contact Email address of the contact person
exit Exit from this submode
no Negate a command or set its defaults
phone-contact Contact person's phone number
site-id Site id of the network where switch is deployed
streetaddress Configure replacement part shipping address.
switch-priority Priority of the switch(0-highest 7-lowest)
transport Configure transport related configuration
|
Displays the options available at this prompt.
|
Assigning Contact Information
It is mandatory for each switch to include e-mail, phone, and street address information. It's optional to include the contract ID, customer ID, site ID, and switch priority information.
To assign the contact information, follow these steps:
|
Command
|
Purpose
|
Step 1
|
|
Enters configuration mode.
|
Step 2
|
switch# snmp-server contact
personname@companyname.com
|
Configures the SNMP contact e-mail address to receive a test message reply from Cisco.
|
Step 3
|
|
Enters the Call Home submode.
|
Step 4
|
switch(config-callhome)# email-contact
username@company.com
successfully updated the information
|
Assigns the customer's e-mail address. Up to 128 alphanumeric characters are accepted in e-mail address format.
Note You can use any valid e-mail address. You cannot use spaces.
|
Step 5
|
switch(config-callhome)# phone-contact
+1-800-123-4567
successfully updated the information
|
Assigns the customer's phone number. Up to 20 alphanumeric characters are accepted in international format.
Note You cannot use spaces. Be sure to use the + prefix before the number
|
Step 6
|
switch(config-callhome)# streetaddress 1234
Picaboo Street, Any city, Any state, 12345
successfully updated the information
|
Assigns the customer's street address where the equipment is located. Up to 256 alphanumeric characters are accepted in free format.
|
Step 7
|
switch(config-callhome)# switch-priority 0
successfully updated the information
|
Assigns the switch priority, with 0 being the highest priority and 7 the lowest.
Tip Use this field to create a hierarchical management structure.
|
Step 8
|
switch(config-callhome)# customer-id
Customer1234
successfully updated the information
|
Optional. Identifies the customer ID. Up to 256 alphanumeric characters are accepted in free format.
|
Step 9
|
switch(config-callhome)# site-id
Site1ManhattanNY
successfully updated the information
|
Optional. Identifies the customer site ID. Up to 256 alphanumeric characters are accepted in free format.
|
Step 10
|
switch(config-callhome)# contract-id
Company1234
successfully updated the information
|
Assigns the customer ID for the switch. Up to 64 alphanumeric characters are accepted in free format.
|
Configuring Destination Profiles
A destination profile contains the required delivery information for an alert notification. Destination profiles are typically configured by the network administrator. At least one destination profile is required. You can configure multiple destination profiles of one or more types.
Note If you use the Cisco AutoNotify service, the XML destination profile is required (see http://www.cisco.com/warp/public/cc/serv/mkt/sup/tsssv/opmsup/smton/anoti_ds.htm).
•Profile ID—A text string that uniquely identifies three predefined destination profile formats: full text, short text, and XML.
•Destination address—The actual address, pertinent to the transport mechanism, to which the alert should be sent.
•Message formatting—The message format used for sending the alert (full text, short text, or XML).
To configure destination profile messaging options, follow these steps:
|
Command
|
Purpose
|
Step 1
|
|
Enters configuration mode.
|
Step 2
|
|
Enters the Call Home submode.
|
Step 3
|
switch(config-callhome)#
destination-profile
full-txt-destination email-addr
person@place.com
successfully updated the information
|
Configures a destination e-mail address for a message sent in full text format. This text provides the complete, detailed explanation of the failure.
Tip Use a standard e-mail address that does not have any text size restrictions.
|
switch(config-callhome)#
destination-profile
full-txt-destination message-size
1000000
successfully updated the information
|
Configures a destination message size for a message sent in full text format. The valid range is 0 to 1,000,000 bytes and the default is 500,000. A value of 0 implies that a message of any size can be sent.
|
Step 4
|
switch(config-callhome)#
destination-profile
short-txt-destination email-addr
person@place.com
successfully updated the information
|
Configures a destination e-mail address for a message sent in short text format. This text provides the basic explanation of the failure.
Tip Use a pager-related e-mail address for this option.
|
switch(config-callhome)#
destination-profile
short-txt-destination message-size
100000
successfully updated the information
|
Configures a destination message size for a message sent in short text format. The valid range is 0 to 1,000,000 bytes and the default is 4000. A value of 0 implies that a message of any size can be sent.
|
Step 5
|
switch(config-callhome)#
destination-profile XML-destination
email-addr findout@.cisco.com
successfully updated the information
|
Configures a destination e-mail address for a message sent in XML format. This option provides the full information that is compatible with Cisco Systems TAC support.
Tip Do not add a pager-related e-mail address to this destination profile because of the large message size.
|
switch(config-callhome)#
destination-profile XML-destination
message-size 100000
successfully updated the information
|
Configures a destination message size for a message sent in XML format. The valid range is 0 to 1,000,000 bytes and the default is 500,000. A value of 0 implies that a message of any size can be sent.
|
Note Steps 3, 4, and 5 in this procedure can be skipped or configured in any order.
Configuring E-Mail Options
You can configure the from, reply-to, and return-receipt e-mail addresses. While most e-mail address configurations are optional, you must ensure to configure the SMTP server address and port number for the Call Home functionality to work.
Configuring General E-Mail Option
To configure general e-mail options, follow these steps:
|
Command
|
Purpose
|
Step 1
|
|
Enters configuration mode.
|
Step 2
|
|
Enters Call Home submode.
|
Step 3
|
switch(config-callhome)# transport
email from user@company1.com
successfully updated the information
|
Optional. Configures the from e-mail address.
|
Step 4
|
switch(config-callhome)# transport
email reply-to person@place.com
successfully updated the information
|
Optional. Configures the reply-to e-mail address to which all responses should be sent.
|
Configuring SMTP Server and Ports
To configure the SMTP server and port, follow these steps:
|
Command
|
Purpose
|
Step 1
|
|
Enters configuration mode.
|
Step 2
|
|
Enters Call Home submode.
|
Step 3
|
switch(config-callhome)# transport
email smtp-server 192.168.1.1
successfully updated the information
|
Configures the DNS or IP address of the SMTP server to reach the server. The port usage defaults to 25 if no port is specified.
Note The port number is optional and, if required, may be changed depending on the server location.
|
switch(config-callhome)# transport
email smtp-server 192.168.1.1 port 30
successfully updated the information
|
Enabling or Disabling Call Home
Once you have configured the contact information, you must enable the Call Home function. The enable command is required for the Call Home function to start operating.
To enable the Call Home function, follow these steps:
|
Command
|
Purpose
|
Step 1
|
|
Enters configuration mode.
|
Step 2
|
|
Enters Call Home submode.
|
Step 3
|
switch(config-callhome)# enable
callhome enabled successfully
|
Enables the Call Home function.
|
switch(config-callhome)# disable
|
Disables the Call Home function. When you disable the Call Home function, all input events are ignored.
Note Even if Call Home is disabled, basic information for each Call Home event is sent to syslog.
|
Testing Call Home Communication
You can simulate a message generation by issuing a test command.
To test the Call Home function, follow these steps:
|
Command
|
Purpose
|
Step 1
|
trying to send test callhome message
successfully sent test callhome message
|
Sends a test message to the configured destination(s).
|
Step 2
|
switch# callhome test inventory
trying to send test callhome message
successfully sent test callhome message
|
Sends a test inventory message to the configured destination(s).
|
Displaying Call Home Information
Use the show callhome command to display the configured Call Home information (see Examples 18-1 to 18-6).
Example 18-1 Displays Configured Call Home Information
contact person name:who@where
contact person's email:person@place.com
contact person's phone number:310-408-4000
street addr:1234 Picaboo Street, Any city, Any state, 12345
site id:Site1ManhattanNewYork
Example 18-2 Displays Destination Profile Information
switch# show callhome destination-profile
XML destination profile information
maximum message size:250000
email addresses configured:
Short-txt destination profile information
maximum message size:4000
email addresses configured:
person1@epage.company.com
full-txt destination profile information
maximum message size:250000
email addresses configured:
Example 18-3 Displays the Full-Text Profile
switch# show callhome destination-profile profile full-txt-destination
full-txt destination profile information
maximum message size:250000
email addresses configured:
Example 18-4 Displays the Short-Text Profile
switch# show callhome destination-profile profile short-txt-destination
Short-txt destination profile information
maximum message size:4000
email addresses configured:
Example 18-5 Displays the XML Destination Profile
switch# show callhome destination-profile profile XML-destination
XML destination profile information
maximum message size:250000
email addresses configured:
Example 18-6 Displays E-mail and SMTP Information
switch# show callhome transport-email
from email addr:user@company1.com
reply to email addr:pointer@company.com
return receipt email addr:user@company1.com
smtp server:server.company.com
Default Settings
Table 18-1 lists the default Call Home default settings.
Table 18-1 Default Call Home Settings
Parameters
|
Default
|
Destination message size for a message sent in full text format.
|
500,000
|
Destination message size for a message sent in XML format.
|
500,000
|
Destination message size for a message sent in short text format.
|
4,000
|
DNS or IP address of the SMTP server to reach the server if no port is specified.
|
25
|
Event Triggers
This section discusses Call Home trigger events. Trigger events are divided into categories, with each category assigned commands to execute when the event occurs. The command output is included in the transmitted message. Table 18-2 lists the trigger events. Table 18-3 lists event categories and command outputs.
Table 18-2 Event Triggers
Event
|
Type
|
Event Name
|
Description
|
Severity Level
|
Call Home
|
System
|
SW_CRASH_STATELESS_RESTART
|
Software process crashed with a disruptive restart indicating an interruption of a service.
|
5
|
Environmental
|
TEMPERATURE_ALARM
|
Thermal sensor indicates temperature reached operating threshold.
|
6
|
POWER_SUPPLY_FAILURE
|
Power supply failed.
|
6
|
FAN_FAILURE
|
Cooling fan has failed.
|
5
|
Switching module
|
LINECARD_FAILURE
|
Switching module operation failed.
|
7
|
POWER_UP_DIAGNOSTICS_FAILURE
|
Switching module failed power up diagnostics.
|
7
|
Supervisor module
|
SUP_FAILURE
|
Supervisor module operation failed.
|
7
|
POWER_UP_DIAGNOSTICS_FAILURE
|
Supervisor module failed power up diagnostics.
|
7
|
Inventory
|
Inventory
|
COLD_BOOT
|
Switch is powered up and reset to a cold boot sequence.
|
2
|
HARDWARE_INSERTION
|
New piece of hardware inserted into the chassis.
|
2
|
HARDWARE_REMOVAL
|
Hardware removed from the chassis.
|
2
|
Test
|
Test
|
TEST
|
User generated test.
|
2
|
Table 18-3 Event Categories and Command Outputs
Event Category
|
Description
|
Executed Commands
|
System
|
Events generated by failure of a software system that is critical to unit operation.
|
show tech-support show system redundancy status
|
Environmental
|
Events related to power, fan, and environment sensing elements such as temperature alarms.
|
show module show environment
|
Switching module hardware
|
Events related to standard or intelligent switching modules.
|
show tech-support
|
Supervisor hardware
|
Events related to supervisor modules.
|
show tech-support
|
Inventory
|
Inventory status is provided whenever a unit is cold booted, or when FRUs are inserted or removed. This is considered a noncritical event, and the information is used for status and entitlement.
|
show version
|
Generic
|
User definable Call Home triggers.
|
show tech-support
|
Test
|
User generated test message.
|
show version
|
Call Home Message Severity Levels
This section discusses the severity levels for a Call Home message when using one or more switches in the Cisco MDS 9000 Family. Severity levels are preassigned per event type.
Note Call Home severity levels are not the same as system message logging severity levels (see "Configuring System Message Logging").
Severity levels range from 0 to 9, with 9 having the highest urgency. Each severity level has keywords as listed in Table 18-4.
Table 18-4 Severity Levels
Severity Level
|
Keyword
|
Description
|
9
|
Catastrophic
|
Network wide catastrophic failure.
|
8
|
Disaster
|
Significant network impact.
|
7
|
Fatal
|
System is unusable.
|
6
|
Critical
|
Critical conditions, immediate attention needed.
|
5
|
Major
|
Major conditions.
|
4
|
Minor
|
Minor conditions.
|
3
|
Warning
|
Warning conditions.
|
2
|
Notification
|
Basic notification and informational messages. Possibly independently insignificant.
|
1
|
Normal
|
Normal event signifying return to normal state.
|
0
|
Debugging
|
Debugging messages.
|
Message Contents
The following contact information can be configured on the switch:
•Name of the contact person
•Phone number of the contact person
•E-mail address of the contact person
•Mailing address to which replacement parts must be shipped, if required
•Site ID of the network where the site is deployed
•Contract ID to identify the service contract of the customer with the service provider
Table 18-5 describes the short text formatting option for all message types.
Table 18-5 Short Text Messages
Data Item
|
Description
|
Device identification
|
Configured device name
|
Date/time stamp
|
Time stamp of the triggering event
|
Error isolation message
|
Plain English description of triggering event
|
Alarm urgency level
|
Error level such as that applied to syslog message
|
Table 18-6, Table 18-7, and Table 18-8 display the information contained in plain text and XML messages.
Table 18-6 Reactive Event Message Format
Data Item (Plain text and XML)
|
Description (Plain text and XML)
|
XML Tag (XML only)
|
Time stamp
|
Date and time stamp of event in ISO time notation: YYYY-MM-DDTHH:MM:SS.
Note The time zone or daylight savings time (DST) offset from UTC has already been added or subtracted. T is the hardcoded limiter for the time.
|
/mml/header/time
|
Message name
|
Name of message. Specific event names are listed in the "Event Triggers" section.
|
/mml/header/name
|
Message type
|
Specifically "Call Home".
|
/mml/header/type
|
Message group
|
Specifically "reactive".
|
/mml/header/group
|
Severity level
|
Severity level of message (see Table 18-4).
|
/mml/header/level
|
Source ID
|
Product type for routing.
|
/mml/header/source
|
Device ID
|
Unique device identifier (UDI) for end device generating message. This field should empty if the message is non-specific to a fabric switch. Format: type@Sid@serial, where
•Type is the product model number from backplane SEEPROM.
•@ is a separator character.
•Sid is "C" identifying serial ID as a chassis serial number·
•Serial number as identified by the Sid field.
Example: "DS-C9000@C@12345678
|
/mml/ header/deviceId
|
Customer ID
|
Optional user-configurable field used for contract info or other ID by any support service.
|
/mml/ header/customerID
|
Contract ID
|
Optional user-configurable field used for contract info or other ID by any support service.
|
/mml/ header /contractId
|
Site ID
|
Optional user-configurable field used for Cisco-supplied site ID or other data meaningful to alternate support service.
|
/mml/ header/siteId
|
Server ID
|
If the message is generated from the fabric switch, it is the unique device identifier (UDI) of the switch.
Format: type@Sid@serial, where
•Type is the product model number from backplane SEEPROM.
•@ is a separator character.
•Sid is "C" identifying serial ID as a chassis serial number·
•Serial number as identified by the Sid field.
Example: "DS-C9000@C@12345678
|
/mml/header/serverId
|
Message description
|
Short text describing the error.
|
/mml/body/msgDesc
|
Device name
|
Node that experienced the event. This is the host name of the device.
|
/mml/body/sysName
|
Contact name
|
Name of person to contact for issues associated with the node experiencing the event.
|
/mml/body/sysContact
|
Contact e-mail
|
E-mail address of person identified as contact for this unit.
|
/mml/body/sysContactEmail
|
Contact phone number
|
Phone number of the person identified as the contact for this unit.
|
/mml/body/sysContactPhoneNumber
|
Street address
|
Optional field containing street address for RMA part shipments associated with this unit.
|
/mml/body/sysStreetAddress
|
Model name
|
Model name of the switch. This is the specific model as part of a product family name.
|
/mml/body/chassis/name
|
Serial number
|
Chassis serial number of the unit.
|
/mml/body/chassis/serialNo
|
Chassis part number
|
Top assembly number of the chassis.
|
/mml/body/chassis/partNo
|
Chassis hardware version
|
Hardware version of chassis.
|
/mml/body/chassis/hwVersion
|
Supervisor module software version
|
Top level software version.
|
/mml/body/chassis/swVersion
|
Affected FRU name
|
Name of the affected FRU generating the event message.
|
/mml/body/fru/name
|
Affected FRU serial number
|
Serial number of affected FRU.
|
/mml/body/fru/serialNo
|
Affected FRU part number
|
Part number of affected FRU.
|
/mml/body/fru/partNo
|
FRU slot
|
Slot number of FRU generating the event message.
|
/mml/body/fru/slot
|
FRU hardware version
|
Hardware version of affected FRU.
|
/mml/body/fru/hwVersion
|
FRU software version
|
Software version(s) running on affected FRU.
|
/mml/body/fru/swVersion
|
Command output name
|
Exact command that was run. For example, show running-config command.
|
/mml/attachments/attachment/name
|
Attachment type
|
Specifically command output.
|
/mml/attachments/attachment/type
|
MIME type
|
Normally text or plain or encoding type.
|
/mml/attachments/attachment/mime
|
Command output text
|
Output of command automatically executed (see Table 18-3).
|
/mml/attachments/attachment/atdata
|
Table 18-7 Inventory Event Message Format
Data Item (Plain text and XML)
|
Description (Plain text and XML)
|
XML Tag (XML only)
|
Time stamp
|
Date and time stamp of event in ISO time notation: YYYY-MM-DDTHH:MM:SS.
Note The time zone or daylight savings time (DST) offset from UTC has already been added or subtracted. T is the hardcoded limiter for the time.
|
/mml/header/time
|
Message name
|
Name of message. Specifically "Inventory Update" Specific event names are listed in the "Event Triggers" section.
|
/mml/header/name
|
Message type
|
Specifically "Inventory Update".
|
/mml/header/type
|
Message group
|
Specifically "proactive".
|
/mml/header/group
|
Severity level
|
Severity level of inventory event is level 2 (seeTable 18-4).
|
/mml/header/level
|
Source ID
|
Product type for routing at Cisco. Specifically "MDS 9000"
|
/mml/header/source
|
Device ID
|
Unique Device Identifier (UDI) for end device generating message. This field should empty if the message is non-specific to a fabric switch. Format: type@Sid@serial, where
•Type is the product model number from backplane SEEPROM.
•@ is a separator character.
•Sid is "C" identifying serial ID as a chassis serial number·
•Serial: The serial number as identified by the Sid field.
Example: "DS-C9000@C@12345678
|
/mml/ header /deviceId
|
Customer ID
|
Optional user-configurable field used for contact info or other ID by any support service.
|
/mml/ header /customerID
|
Contract ID
|
Optional user-configurable field used for contact info or other ID by any support service.
|
/mml/ header /contractId
|
Site ID
|
Optional user-configurable field, can be used for Cisco-supplied site ID or other data meaningful to alternate support service.
|
/mml/ header /siteId
|
Server ID
|
If the message is generated from the fabric switch, it is the Unique device identifier (UDI) of the switch.
Format: type@Sid@serial, where
•Type is the product model number from backplane SEEPROM.
•@ is a separator character.
•Sid is "C" identifying serial ID as a chassis serial number·
•Serial: The serial number as identified by the Sid field.
Example: "DS-C9000@C@12345678
|
/mml/header/serverId
|
Message description
|
Short text describing the error.
|
/mml/body/msgDesc
|
Device name
|
Node that experienced the event.
|
/mml/body/sysName
|
Contact name
|
Name of person to contact for issues associated with the node experiencing the event.
|
/mml/body/sysContact
|
Contact e-mail
|
E-mail address of person identified as contact for this unit.
|
/mml/body/sysContactEmail
|
Contact phone number
|
Phone number of the person identified as the contact for this unit.
|
/mml/body/sysContactPhoneNumber
|
Street address
|
Optional field containing street address for RMA part shipments associated with this unit.
|
/mml/body/sysStreetAddress
|
Model name
|
Model name of the unit. This is the specific model as part of a product family name.
|
/mml/body/chassis/name
|
Serial number
|
Chassis serial number of the unit.
|
/mml/body/chassis/serialNo
|
Chassis part number
|
Top assembly number of the chassis.
|
/mml/body/chassis/partNo
|
Chassis hardware version
|
Hardware version of chassis.
|
/mml/body/chassis/hwVersion
|
Supervisor module software version
|
Top level software version.
|
/mml/body/chassis/swVersion
|
FRU name
|
Name of the affected FRU generating the event message.
|
/mml/body/fru/name
|
FRU s/n
|
Serial number of FRU.
|
/mml/body/fru/serialNo
|
FRU part number
|
Part number of FRU.
|
/mml/body/fru/partNo
|
FRU slot
|
Slot number of FRU.
|
/mml/body/fru/slot
|
FRU hardware version
|
Hardware version of FRU.
|
/mml/body/fru/hwVersion
|
FRU software version
|
Software version(s) running on FRU.
|
/mml/body/fru/swVersion
|
Command output name
|
Exact command that was run. For example, the show running-config command.
|
/mml/attachments/attachment/name
|
Attachment type
|
Specifically command output.
|
/mml/attachments/attachment/type
|
MIME type
|
Normally text or plain or encoding type.
|
/mml/attachments/attachment/mime
|
Command output text
|
Output of command automatically executed after event categories (see "Event Triggers" section).
|
/mml/attachments/attachment/atdata
|
Table 18-8 User-Generated Test Message Format
Data Item (Plain text and XML)
|
Description (Plain text and XML)
|
XML Tag (XML only)
|
Time stamp
|
Date and time stamp of event in ISO time notation: YYYY-MM-DDTHH:MM:SS.
Note The time zone or daylight savings time (DST) offset from UTC has already been added or subtracted. T is the hardcoded limiter for the time.
|
/mml/header/time
|
Message name
|
Name of message. Specifically test message for test type message. Specific event names listed in the "Event Triggers" section).
|
/mml/header/name
|
Message type
|
Specifically "Test Call Home".
|
/mml/header/type
|
Message group
|
This field should be ignored by the receiving Call Home processing application, but may be populated with either "proactive" or "reactive".
|
/mml/header/group
|
Severity level
|
Severity level of message, test Call Home message (see Table 18-4).
|
/mml/header/level
|
Source ID
|
Product type for routing.
|
/mml/header/source
|
Device ID
|
Unique Device Identifier (UDI) for end device generating message. This field should empty if the message is non-specific to a fabric switch. Format: type@Sid@serial, where
•Type is the product model number from backplane SEEPROM.
•@ is a separator character.
•Sid is "C" identifying serial ID as a chassis serial number·
•Serial: The serial number as identified by the Sid field.
Example: "DS-C9000@C@12345678
|
/mml/ header /deviceId
|
Customer ID
|
Optional user-configurable field used for contract info or other ID by any support service.
|
/mml/ header /customerId
|
Contract ID
|
Optional user-configurable field used for contract info or other ID by any support service.
|
/mml/ header /contractId
|
Site ID
|
Optional user-configurable field used for Cisco-supplied site ID or other data meaningful to alternate support service.
|
/mml/ header /siteId
|
Server ID
|
If the message is generated from the fabric switch, it is the Unique device identifier (UDI) of the switch.
Format: type@Sid@serial, where
•Type is the product model number from backplane SEEPROM.
•@ is a separator character.
•Sid is "C" identifying serial ID as a chassis serial number·
•Serial: The serial number as identified by the Sid field.
Example: "DS-C9000@C@12345678
|
/mml/header/serverId
|
Message description
|
Short text describing the error.
|
/mml/body/msgDesc
|
Device name
|
Switch that experienced the event.
|
/mml/body/sysName
|
Contact name
|
Name of person to contact for issues associated with the node experiencing the event.
|
/mml/body/sysContact
|
Contact Email
|
E-mail address of person identified as contact for this unit.
|
/mml/body/sysContactEmail
|
Contact phone number
|
Phone number of the person identified as the contact for this unit.
|
/mml/body/sysContactPhoneNumber
|
Street address
|
Optional field containing street address for RMA part shipments associated with this unit.
|
/mml/body/sysStreetAddress
|
Model name
|
Model name of the switch. This is the specific model as part of a product family name.
|
/mml/body/chassis/name
|
Serial number
|
Chassis serial number of the unit.
|
/mml/body/chassis/serialNo
|
Chassis part number
|
Top assembly number of the chassis. For example, 800-xxx-xxxx.
|
/mml/body/chassis/partNo
|
Command output text
|
Output of command automatically executed after event categories listed in Table 18-3.
|
/mml/attachments/attachment/atdata
|
MIME type
|
Normally text or plain or encoding type.
|
/mml/attachments/attachment/mime
|
Attachment type
|
Specifically command output.
|
/mml/attachments/attachment/type
|
Command output name
|
Exact command that was run. For example, the show running-config command.
|
/mml/attachments/attachment/name
|