 Feedback
|
Table Of Contents
Cisco MDS 9000 Family Release Notes
for Cisco MDS SAN-OS Release 1.0(4)Determining the Software Version
New Features in Release 1.0(4)
Obtaining Technical Assistance
Obtaining Additional Publications and Information
Cisco MDS 9000 Family Release Notes
for Cisco MDS SAN-OS Release 1.0(4)
CCO Date: February 5, 2005
Text Part Number: OL-3899-02 A0
This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use this document in conjunction with documents listed in the "Related Documentation" section.
Note
Release notes are sometimes updated with new information on restrictions and caveats. Refer to the following website for the most recent version of the Cisco MDS 9000 Family Release Notes: http://www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_release_notes_list.html
Table 1 shows the on-line change history for this document.
Table 1 On-Line History Change
A0
06/23/2005
Added DDTS CSCei25319
Contents
This document includes the following section:
•
•
Introduction
The Cisco MDS 9000 Family of multilayer directors and fabric switches offer intelligent fabric-switching services that realize maximum performance while ensuring high reliability levels. They combine robust and flexible hardware architecture with multiple layers of network and storage management intelligence. This powerful combination enables highly available, scalable storage networks that provide advanced security and unified management features.
The Cisco MDS 9000 Family provides intelligent networking features such as multiprotocol and multitransport integration, virtual SANs (VSANs), advanced security, sophisticated debug analysis tools, and unified SAN management.
System Requirements
This section describes the system requirements for Cisco MDS SAN-OS Release 1.0(4) and includes the following topics:
•
Hardware Supported
Table 2 lists the hardware components supported on the Cisco MDS 9000 Family and the minimum software version required. See the "Determining the Software Version" section.
Table 2 Cisco MDS 9000 Family Supported Hardware Modules and Minimum Software Requirements
Software
M9500-SF1EK9-1.0.3a
MDS 9500 supervisor/fabric-I, enterprise software
MDS 9509 only
M9200-EK9-1.0.3a
MDS9216 enterprise software
MDS 9216 only
Chassis
DS-C9509
MDS 9509 director, base configuration (9-slot chassis, dual 2500W AC power supplies, and dual supervisors — SFPs sold separately)
MDS 9509 only
DS-C9216-K9
MDS 9216 16-port modular fabric switch (includes sixteen 1 / 2-Gbps Fibre Channel ports, power supply, and expansion slot — SFPs sold separately)
MDS 9216 only
Supervisor modules
DS-X9530-SF1-K9
MDS 9500 supervisor/fabric-I, module
MDS 9509 only
Switching modules
DS-X9016
MDS 9000 16-port 1/2-Gbps Fibre Channel module (SFPs sold separately)
MDS 9509 and 9216
DS-X9032
MDS 9000 32-port 1/2-Gbps Fibre Channel module (SFPs sold separately)
LC-type fiber-optic SFP1
DS-SFP-FC-2G-SW
1/2-Gbps Fibre Channel — short wave SFP
MDS 9509 and 9216
DS-SFP-FC-2G-LW
1/2-Gbps Fibre Channel — long wave SFP
Power supplies
DS-CAC-845W
AC Power supply for MDS 9216
MDS 9216 only
DS-CAC-2500W
2500W AC power supply
MDS 9509 only
DS-CAC-4000W-US
4000W2 AC power supply for US (cable attached)
DS-CAC-4000W-INT
4000W AC power supply international (cable attached)
DS-CDC-2500W
2500W DC power supply
CompactFlash
MEM-MDS-FLD512M
MDS 9500 supervisor CompactFlash disk, 512MB
MDS 9509 only
Port analyzer adapter
DS-PAA
A standalone Fibre Channel-to-Ethernet adapter that allows for simple, transparent analysis of Fibre Channel traffic in a switched fabric.
MDS 9509 and 9216
1 SFP = small form factor pluggable
2 W = Watt
Determining the Software Version
Note
To determine the version of the Cisco SAN-OS software currently running on a Cisco MDS 9000 Family switch, log in to the switch and enter the show version EXEC command.
Feature Set
This Cisco MDS SAN-OS Release 1.0(4) software is packaged in feature sets (also called software images) depending on the platform. The Cisco MDS SAN-OS software feature sets available for the Cisco MDS 9000 Family include Ethernet, Fibre Channel (1 Gbps and 2 Gbps), SNMP, and IP packets.
New Features in Release 1.0(4)
SAN-OS Release 1.0(4) is a maintenance release for switches in the Cisco MDS 9000 Family. See the "Caveats" section for details on closed and outstanding caveats and limitations.
Note
Limitations and Restrictions
The following limitations and restrictions apply to all switches in the Cisco MDS 9000 Family.
COM 1 Port
The COM1 port is not currently available in Cisco MDS 9000 Family switches, but in the future will connect to an external serial communication device, such as a modem.
Caveats
This section lists the caveats and corrected caveats for this release. Use Table 3 to determine the status of a particular caveat. In the table, "R" indicates a resolved caveat, and "O" indicates an open caveat.
Resolved Caveats
•
Symptom: When you bring down a range of FL ports, there is a delay of four (4) seconds. This problem does not affect switch operation.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdy71186
•
Symptom: The show logging level command does not display the configured levels for some MDS services like system manager, RDL, and FLOGI.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdz41155
•
Symptom: When the switch boots for the first time and you configure the initial setup dialogue, or if you issue the write erase command and then reboot the switch, the setup process creates the configuration based on the input that you provide for the configuration.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdz42325
•
Symptom: When you perform a traceroute operation from the Fabric Manager on a switch running SAN-OS Release 1.0.3a, it returns a no route to host or ISL error. The same operation succeeds when performed using the CLI.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdz46162
•
Symptom: During a fabric configuration analysis, the Fabric Manager issues a Java NULL pointer error.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdz52654
•
Symptom: During fabric rediscovery, the Fabric Manager application gets stuck and issues a SpinLOCK error on the status bar.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdz55244
•
Symptom: During a switching module upgrade, if your press the refresh button in the Element Manager, you may receive a Java error.
Please use the following URL for further information: http://www.cisco.com/pcgi-bin/bugtool/onebug.pl?bugid=CSCdz81142
Open Caveats
•
Symptom: If automatic image synchronization is enabled, and the standby supervisor module is synchronizing the image from the active supervisor, the switch won't stop the user from issuing the reload command on the active or standby supervisor modules. This may result in a failure to synchronize the images.
Workaround: Be sure to allow sufficient time for the images to be synchronized before reloading a supervisor module.
•
Sympton: An error message in the log file occurs because the platform manager component passes the wrong parameter while responding to a SNMP query. In some cases, this results in the query not being responded to.
Workaround: Perform a refresh on Device Manager to clear the problem.
•
Symptom: When the Fabric Manager or Device Manager is run through VPN or any NAT scheme, a generic error occurs while adding duplicate zone members from a VPN connection.
Workaround: None. If an error occurs while running through VPN/NAT, all errors will show up as generic errors without a detailed message describing the error.
•
Symptom: The Ethereal decoder incorrectly decodes the A bit in the Common Service Parameters set as Normal, instead of Alternate BB_Credit Management.
Workaround: None. The trace must be interpreted correctly.
•
Symptom: During an install procedure, entering Ctrl-c returns a message saying that the install procedure cannot be interrupted, while Ctrl-z returns the prompt without any message. In either case, the install procedure continues.
Workaround: None.
•
Symptom: The Fabric Manager or Device Manager reports an error for all operations if the switch is multihomed (both IPFC based in-band management and the out-of-band management interface are up) and the Fabric or Device Manager was started using the IP-FC address. Typically, you will see a notInTime window error in the Device Manager and all sets fail.
Workaround: If the switch is multihomed, then start the Fabric or Device Manager on the switch using the out-of-band address.
•
Symptom: The counter values freeze if the Device Manager port monitor window has been up and running for a long time (overnight or a few days).
Workaround: Close the frozen Device Manager window and open a new session.
•
Symptom: If the switch time zone is not UTC (default), the expire option for the username command returns an error. If the expire option is not specified, the username command does not have this issue.
switch# show clockMon Mar 17 18:20:28 JST 2003switch(config)# username user1 password cisco expireexpiry date wrongWorkaround: While creating a user-account, temporarily change the time zone to UTC.
•
Symptom: If you clear a kickstart boot variable that doesn't exist and if a kickstart boot variable with the same name size as the specified variable is stored in the system, the bootvar process crashes.
Workaround: Clear the kickstart boot variable using the no boot kickstart command.
•
Symptom: Some private initiators (for example, SUN) are not properly registered with FLOGI. This results in the disks not being visible to the initiators.
Workaround: None.
Related Documentation
Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family
Quick Start Guide for the Cisco MDS 9000 Family
Cisco MDS 9200 Series Hardware Installation Guide
Cisco MDS 9500 Series Hardware Installation Guide
Cisco MDS 9000 Family Command Reference
Cisco MDS 9000 Family Fabric Manager User Guide
Cisco MDS 9000 Family Troubleshooting Guide
Cisco MDS 9000 Family System Messages Guide
Cisco MDS 9000 Family MIB Reference Guide
Obtaining Documentation
Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
International Cisco websites can be accessed from this URL:
http://www.cisco.com/public/countries_languages.shtml
Documentation CD-ROM
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription.
Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool:
http://www.cisco.com/en/US/partner/ordering/ordering_place_order_ordering_tool_launch.html
All users can order monthly or quarterly subscriptions through the online Subscription Store:
http://www.cisco.com/go/subscription
Ordering Documentation
You can find instructions for ordering documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order Cisco documentation in these ways:
•
http://www.cisco.com/en/US/partner/ordering/index.shtml
•
Documentation Feedback
You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page.
You can e-mail your comments to mdsfeedback-doc@cisco.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Obtaining Technical Assistance
Note
If you purchased this product directly from Cisco, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtmlCisco provides Cisco.com, which includes the Cisco Technical Assistance Center (TAC) website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities.
Cisco.com
Cisco.com offers a suite of interactive, networked services that let you access Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com provides a broad range of features and services to help you with these tasks:
•
•
•
•
•
To obtain customized information and service, you can self-register on Cisco.com at this URL:
http://tools.cisco.com/RPF/register/register.do
Technical Assistance Center
The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available: the Cisco TAC website and the Cisco TAC Escalation Center. The type of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable.
We categorize Cisco TAC inquiries according to urgency:
•
•
•
•
Cisco TAC Website
The Cisco TAC website provides online documents and tools to help troubleshoot and resolve technical issues with Cisco products and technologies. To access the Cisco TAC website, go to this URL:
All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website. Some services on the Cisco TAC website require a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:
http://tools.cisco.com/RPF/register/register.do
If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC website, you can open a case online at this URL:
http://www.cisco.com/tac/caseopen
If you have Internet access, we recommend that you open P3 and P4 cases online so that you can fully describe the situation and attach any necessary files.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Before calling, please check with your network operations center to determine the Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•
http://www.cisco.com/en/US/products/products_catalog_links_launch.html
•
•
http://www.cisco.com/go/packet
•
http://www.cisco.com/go/iqmagazine
•
http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html
•
http://www.cisco.com/en/US/learning/le31/learning_recommended_training_list.html
CCIP, CCSP, the Cisco Arrow logo, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, MGX, MICA, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, Stratm, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0304R)
