Table Of Contents
Mounting and Unmounting the CD-ROM
Mounting a Local CD-ROM Drive
Mounting a Remote CD-ROM Drive
Unmounting the CD-ROM Drive
Mounting and Unmounting the CD-ROM
This appendix describes how to mount and unmount the Essentials CD-ROM on a AIX 4.3.3 system and includes general information only. For more detailed instructions, consult your AIX documentation.
You can install Essentials from a CD-ROM mounted on the Essentials server system or from a CD-ROM mounted on a remote AIX system. After you complete the Essentials installation, you need to unmount the CD-ROM drive
This appendix contains the following sections:
•
Mounting a Local CD-ROM Drive
•Mounting a Remote CD-ROM Drive
•Unmounting the CD-ROM Drive
Mounting a Local CD-ROM Drive
To mount a local CD-ROM drive:
Step 1 Insert the Essentials CD-ROM into the CD-ROM drive.
Step 2 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (#).
Step 3 If the /cdrom directory does not already exist, enter the following command to create it:
# mkdir /cdrom
Step 4 Start SMIT by entering the following command:
# smit
Step 5 From the SMIT System Management menu, select System Storage Management (Physical & Logical Storage).
Step 6 Select File Systems.
Step 7 Select Add/Change/Show/Delete File Systems.
Step 8 Select CDROM File Systems.
Step 9 Click the DEVICE name List button, and select the device name (such as cd0) from the list that appears.
Step 10 Enter the name of a mount point directory (such as /cdrom) in the Mount Point field.
Step 11 Click OK and check for messages in the Output: field.
If you have already performed this procedure, or if another device is already mounted on the mount point, the process fails.
Step 12 Click Done. Click Cancel to clear the Add CDROM File System dialog box.
Step 13 Terminate SMIT by pressing F12 or selecting Exit > Exit SMIT.
Step 14 Enter the following at the command prompt:
# smitmountfs
The Mount a File System dialog box appears.
Step 15 Click the FILE SYSTEM name List button, and select the device name of the CD-ROM drive that you want to mount (such as cd0) from the list that appears.
Step 16 In the DIRECTORY over which to mount field, enter the name of a mount point directory (for example, /cdrom).
Step 17 Click the TYPE of file system List button, and select cdrfs as the filesystem type.
Step 18 Set the Mount as Read-Only system field to yes.
Step 19 Click OK and check for messages in the Output: field. If the mount is successful, there are no messages.
Step 20 Click Done.
Step 21 Click Cancel to exit SMIT.
You have now mounted the CD-ROM drive. Refer to "Installing Essentials" for instructions on installation.
Mounting a Remote CD-ROM Drive
To mount a remote CD-ROM drive:
Step 1 Perform all steps described in "Mounting a Local CD-ROM Drive" on the remote workstation.
Step 2 From the command line, enter the following command:
# smit mknfsexp
The Add a Directory to Exports List dialog box appears.
Step 3 Enter the CD-ROM mount point directory (such as /cdrom) in the PATHNAME of directory to export field.
Step 4 Use the arrow buttons to change the Mode to Export Directory field to read-only.
Step 5 Enter the appropriate information, if necessary, into the other fields.
Step 6 Click OK, and check for messages in the Output: field.
Step 7 Click Done.
Step 8 Click Cancel to exit SMIT.
After working on the remote workstation, perform the following steps on the local workstation:
Step 9 Log in as root.
Step 10 Enter the following command:
# mount remote_hostname:remote_exported_filesystem_name \ local_mount_point
For example, to mount the /cdrom remote filesystem from the workstation zen to the local /cdrom directory, enter the following command:
# mount zen:/cdrom /cdrom
You have now mounted the CD-ROM drive. Refer to "Installing Essentials" for installation instructions.
Unmounting the CD-ROM Drive
After you complete the Essentials installation, you need to unmount the CD-ROM drive and eject the CD-ROM.
To unmount a local CD-ROM drive:
Step 1 Unmount the CD-ROM filesystem by performing one of the following procedures:
a. As root, enter:
# cd
# umount themountpoint
Where themountpoint is the directory on the local system on which you mounted the CD-ROM. For example, if you mounted the CD-ROM on the local directory /cdrom, you would enter the following command:
# umount /cdrom
Or
a. As root, invoke SMIT by entering the command smit.
b. Select System Storage Management.
c. Select File Systems.
d. Select Unmount a File System.
e. Enter the mountpoint in the Name of the file system to unmount field.
f. Click OK.
Step 2 Remove the CD-ROM and store it in a safe place.
To unmount a remote CD-ROM drive:
Step 1 As root, invoke SMIT at the remote machine by entering the command smit.
Step 2 Select System Storage Management (Physical & Local Storage).
Step 3 Select File Systems.
Step 4 Select Add/Change/Show/Delete File Systems.
Step 5 Select Network File System (NFS).
Step 6 Select Network File System (NFS) again.
Step 7 Select Remove a Directory from Exports List.
Step 8 Enter the CD-ROM mount point directory (such as /cdrom) in the PATHNAME of exported directory to be removed field and click OK.
Step 9 As root, enter the following command on the remote machine and the local machine:
# cd
# umount themountpoint
Where themountpoint is the directory on the system on which you mounted the CD-ROM. For example, if you mounted the CD-ROM on the directory /cdrom on both the local and remote systems, you would enter the following command on both machines:
# umount /cdrom
Note Alternatively, you can use SMIT to unmount the CD-ROM filesystem on the local machine as explained in the "Unmounting the CD-ROM Drive" section.
Step 10 Remove the CD-ROM and store it in a safe place.
Feedback
