|
Contents
- SIP-to-SIP Supplementary Services for Session Border Controller
- Finding Feature Information
- Prerequisites for SIP-to-SIP Supplementary Services for Session Border Controller
- Information About SIP-to-SIP Supplementary Services for Session Border Controller
- SIP-to-SIP Supplementary Services for Session Border Controller
- Digital Signal Processors (DSPs) and SIP Call Hold/Resume
- How to Configure SIP-to-SIP Supplementary Services for Session Border Controller
- Additional References
- Feature Information for SIP-to-SIP Supplementary Services for Session Border Controller
SIP-to-SIP Supplementary Services for Session Border Controller
The SIP-to-SIP Supplementary Services for Session Border Controller (SBC) feature enhances the terminating and reoriginating of signaling and media between VoIP and video networks.
- Finding Feature Information
- Prerequisites for SIP-to-SIP Supplementary Services for Session Border Controller
- Information About SIP-to-SIP Supplementary Services for Session Border Controller
- How to Configure SIP-to-SIP Supplementary Services for Session Border Controller
- Additional References
- Feature Information for SIP-to-SIP Supplementary Services for Session Border Controller
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information About SIP-to-SIP Supplementary Services for Session Border Controller
- SIP-to-SIP Supplementary Services for Session Border Controller
- Digital Signal Processors (DSPs) and SIP Call Hold/Resume
SIP-to-SIP Supplementary Services for Session Border Controller
The SIP-to-SIP Supplementary Services for Session Border Controller (SBC) feature enhances terminating and reoriginating of signaling and media between VoIP and video networks by supporting the following features:
- IP Address-Hiding in all Session Initiation Protocol (SIP) messages including supplementary services
- Media Flow Around
- Hosted Network Address Translation (NAT) Traversal for SIP
- Support on Cisco AS5350XM and Cisco AS5400XM platforms
- SIP-to-SIP Supplementary services using REFER/3xx method.
The following features of SIP-to-SIP Supplementary services using REFER/3xx method are enabled by default:
Digital Signal Processors (DSPs) and SIP Call Hold/Resume
Digital Signal Processors (DSPs) generate and transmit Real-time Transport Protocol (RTP) media packets from a source to a destination address during a SIP call session. However, when a SIP call is put on hold, DSPs stop generating the RTP media packets and resumes generating and transmitting the RTP media packets after the SIP call is resumed. This ensures that the RTP sequence number is continuous from the time of origin until the end of the SIP call.
How to Configure SIP-to-SIP Supplementary Services for Session Border Controller
To configure the SIP-to-SIP Supplementary Services for Session Border Controller feature, see the "SIP-to-SIP Connections on a Cisco Unified Border Element" chapter in the Cisco Unified Border Element Configuration Guide.
Additional References
Technical Assistance
Description | Link |
---|---|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information for SIP-to-SIP Supplementary Services for Session Border Controller
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1 | Feature Information for Configuring SIP-SIP Supplementary Features |
Feature Name |
Releases |
Feature Information |
---|---|---|
SIP-to-SIP Supplementary Services for Session Border Controller |
12.4(9)T 15.1(1)T5 |
The SIP-to-SIP Supplementary Services for Session Border Controller feature enhances terminating and reoriginating of signaling and media between VoIP and video networks. No new commands were added or modified. |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.