Mobilidade de ramal e Mobilidade de ramal entre clusters : Alterações no CUCM 12.5

Opções de download

  • PDF     (404.5 KB)
    Ver no Adobe Reader em vários dispositivos
  • ePub     (239.7 KB)
    Ver em vários aplicativos no iPhone, iPad, Android, Sony Reader ou Windows Phone
  • Mobi (Kindle)     (301.7 KB)
    Ver no dispositivo Kindle ou no aplicativo Kindle em vários dispositivos
Atualizado:6 de fevereiro de 2019
ID do documento:214055

Linguagem imparcial

O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.

Sobre esta tradução

A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.

    Introduction

    Este documento descreve as alterações em um dos parâmetros de serviço Multiple Login Behavior para o cluster cruzado de mobilidade de ramal. 

    Prerequisites

    Requirements

    Não existem requisitos específicos para este documento.

    Componentes Utilizados

    As informações neste documento são baseadas nestas versões de software e hardware:

    • Versão do Cisco Call Manager: 12.5.0.98000-1078 e 12.5.0.99832-3

    • Telefone IP 8861 da Cisco
      Protocolo: SIP
      Firmware: 12-0-1 SR1-1 
    • Telefone IP 8851 da Cisco 
      Protocolo: SIP
      Firmware: 12-0-1 SR1-1

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. Se a rede estiver ativa, certifique-se de que você entenda o impacto potencial de qualquer comando.

    Configurar

    Mobilidade de ramal: Ele permite que os usuários acessem temporariamente a configuração do telefone IP da Cisco (discagem rápida, aparência da linha) de outro telefone IP da Cisco no mesmo cluster. 

    Cluster entre Mobilidade de Ramal: Esse recurso permite que um usuário de um cluster do Cisco Unified Communication Manager (CUCM) (normalmente chamado de cluster doméstico) faça login em um Telefone IP da Cisco de outro cluster do CUCM (conhecido como cluster visitante) como se ele usasse o Telefone IP no local de origem. 

    Anterior a 12,5

    Havia um parâmetro de serviço Comportamento de Logon Múltiplo IntraCluster (Sistema > Parâmetro de Serviço e Selecione o gerente de chamadas e a mobilidade de Ramal como serviço). Esse parâmetro usado para controlar os vários logins para mobilidade de ramal. Os valores válidos eram:

    • Permitido

                  Um usuário pode fazer login em vários telefones ao mesmo tempo.

    • Não permitido

                  Se um usuário estiver conectado a um dos telefones, ele não poderá fazer login em outro telefone.

    • Logoff automático

                  Se um usuário estiver conectado em um telefone e tentar fazer login em outro telefone, o login será bem-sucedido no segundo telefone e será desconectado do primeiro telefone.

    Para a EMCC, esse comportamento não existia. Vários logins sempre foram permitidos, e admin não tinha a opção de controlá-los. 

    Novas alterações na versão 12.5 em diante

    Agora, na EMCC também, temos a flexibilidade de controlar vários logins. Há um novo parâmetro de serviço chamado Multiple Login Behavior (System > Service Parameter e, em seguida, Select your call manager and Extension mobility as the service) que nos ajuda a alcançar isso. Tem os mesmos valores de antes:

    • Vários logins permitidos
    • Vários logins não permitidos
    • Logoff automático

    Note: As configurações de parâmetros de serviço aplicadas no cluster doméstico aplicam e não visita o cluster.

    Exemplo de cenário: Vários parâmetros de comportamento de login são definidos como Vários Logons Não Permitidos no cluster doméstico e Vários Logons Permitidos no cluster visitante. 

    Se você fizer login no cluster visitante e tentar fazer login novamente em outro telefone no cluster visitante, portanto, nesse caso, não é permitido fazer login desde então, o parâmetro está definido como Vários Logons Não Permitidos no cluster inicial.

    Troubleshoot

    Análise de registro para Mobilidade de ramal 

    Caso 1: Comportamento de Login Múltiplo definido como Vários Logons Permitidos

    O parâmetro de serviço tem a seguinte aparência:

    Nos registros do serviço de mobilidade de ramal, você pode ver o parâmetro aqui:

    2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - -------------Begin Service Parameters ----------------

2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - Max Duration Enabled                                              = false

2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - Intra-Cluster Max Login Duration String   = 0

2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - Inter-cluster Max Login Duration String  = 10:00

2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - Multi Login Policy                                                       = multiOK

2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - Max Concurrent Sessions                                         = 15

2019-01-26 10:55:59,109 INFO  [Thread-68           ] ServiceParameters         - Is IP Check Enabled                                                                       = false

2019-01-26 10:55:59,110 INFO  [Thread-68           ] ServiceParameters         - Trusted IP List                                               =

2019-01-26 10:55:59,110 INFO  [Thread-68           ] ServiceParameters         - EM Device Cache Size                                        = 10000

2019-01-26 10:55:59,110 INFO  [Thread-68           ] ServiceParameters         - Allow Proxy                                                   = false

2019-01-26 10:55:59,110 INFO  [Thread-68           ] ServiceParameters         - EMCC Allow Proxy                                                      = true

2019-01-26 10:55:59,110 INFO  [Thread-68           ] ServiceParameters         - -------------- End Service Parameters ----------------

    Caso 2: Comportamento de login múltiplo definido como Logins múltiplos não permitidos

    O parâmetro de serviço tem a seguinte aparência:

    Nos registros do serviço de mobilidade de ramal, você pode ver isso como parâmetro :

    2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - -------------Begin Service Parameters ----------------

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Max Duration Enabled                                              = false

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Intra-Cluster Max Login Duration String   = 0

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Inter-cluster Max Login Duration String  = 10:00

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Multi Login Policy                                                       = noLogin

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Max Concurrent Sessions                                         = 15

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Is IP Check Enabled                                                                       = false

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - Trusted IP List                                               =

2019-01-24 22:12:15,916 INFO  [Thread-68           ] ServiceParameters         - EM Device Cache Size                                        = 10000

2019-01-24 22:12:15,917 INFO  [Thread-68           ] ServiceParameters         - Allow Proxy                                                   = false

2019-01-24 22:12:15,917 INFO  [Thread-68           ] ServiceParameters         - EMCC Allow Proxy                                                      = true

2019-01-24 22:12:15,917 INFO  [Thread-68           ] ServiceParameters         - -------------- End Service Parameters ----------------

    É assim que o erro é impresso:

    2019-01-26 10:54:45,661 ERROR [http-bio-8443-exec-19] EMServiceServlet          - 110: LoginService: Dev: test2- Error# 25-com.cisco.emservice.MyException: Policy Violation: com.cisco.emservice.PolicyValidatorException: Not allowed to log into multiple devices.

 

2019-01-26 10:54:45,661 INFO  [http-bio-8443-exec-19] EMServiceServlet          - 110:Request succeeded returning<response>

<failure>

<error code="25">Policy Violation: com.cisco.emservice.PolicyValidatorException: Not allowed to log into multiple devices.

</error>

</failure>

</response>

    No telefone, esse erro está presente.

    Caso 3: Comportamento de login múltiplo definido como Logoff automático

    O parâmetro de serviço tem a seguinte aparência:

    Nos registros do serviço de mobilidade de ramal, você pode ver isso como o parâmetro :

    2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - -------------Begin Service Parameters ----------------

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Max Duration Enabled                                              = false

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Intra-Cluster Max Login Duration String   = 0

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Inter-cluster Max Login Duration String  = 10:00

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Multi Login Policy                                                       = autoLogout

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Max Concurrent Sessions                                         = 15

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Is IP Check Enabled                                                                       = false

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Trusted IP List                                               =

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - EM Device Cache Size                                        = 10000

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - Allow Proxy                                                   = false

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - EMCC Allow Proxy                                                      = true

2019-01-26 10:57:30,641 INFO  [Thread-68           ] ServiceParameters         - -------------- End Service Parameters ----------------

    Análise de log para EMCC

    Caso 1: Comportamento de Login Múltiplo definido como Vários Logons Permitidos

    Cluster doméstico

    Nos registros de serviços EM:

    Solicitação de login pela primeira vez do telefone (SEPF8A5C59E1126)

    2019-01-26 13:45:36,635 DEBUG [http-bio-8443-exec-1] EmccSaxHandler - EMURI = http%3A%2F%2F10.106.125.174%3A8080%2Femapp%2FEMAppServlet%3Fdevice%3DSEPF8A5C59E1126%26doLogout%3Dtrue
2019-01-26 13:45:36,637 DEBUG [http-bio-8443-exec-1] EMServiceServlet - 101: Parse Complete
2019-01-26 13:45:36,637 INFO [http-bio-8443-exec-1] EMServiceServlet - 101: Setting remoteIPAddr to connection IP=10.106.125.174
2019-01-26 13:45:36,637 INFO [http-bio-8443-exec-1] EMServiceServlet - 101 : 137 : atbabu: processEmccRequest: Received EMCC Home Cluster Login Request for :rak
2019-01-26 13:45:36,637 INFO [http-bio-8443-exec-1] EMServiceServlet - 101 : 137 : DeviceSecurityMode: 1 HomeCluster SecurityMode: 0
2019-01-26 13:45:36,637 INFO [http-bio-8443-exec-1] EMServiceServlet - 101: authenticate pin for rak
2019-01-26 13:45:36,650 INFO [http-bio-8443-exec-1] EMServiceServlet - 101 : 137 : atbabu: EmccHomeLogin : Performing Home Device Login for :rak
2019-01-26 13:45:36,650 INFO [http-bio-8443-exec-1] EmccData - 101: getRemoteClusterInfo: Pkid for cluster atbabu is d23ef9ea-8392-dbbf-61db-1d9e1d505243
2019-01-26 13:45:36,650 DEBUG [http-bio-8443-exec-1] EmccData - 101: getRemoteClusterInfo: Hostname = 10.106.125.174
2019-01-26 13:45:36,650 INFO [http-bio-8443-exec-1] Authenticator - 101:Authenticator.userExists: UserID: rak- Calling cmdb.isLocalUser(osUserID)...
2019-01-26 13:45:36,650 DEBUG [http-bio-8443-exec-1] CMDatabase - Userid being passed to the query is rak
2019-01-26 13:45:36,651 DEBUG [http-bio-8443-exec-1] CMDatabase - CMDatabase.isLocalUser() : SELECT islocaluser FROM EndUser WHERE my_lower(userid)= my_lower(?) : parameter ( 'rak' )
2019-01-26 13:45:36,655 DEBUG [http-bio-8443-exec-1] CMDatabase - PKID for the ROW is 
2019-01-26 13:45:36,655 DEBUG [http-bio-8443-exec-1] CMDatabase - CMDatabase.isLocalUser() : isLocaluser : true
2019-01-26 13:45:36,656 DEBUG [http-bio-8443-exec-1] CMDatabase - is Local user value :true
2019-01-26 13:45:36,656 INFO [http-bio-8443-exec-1] Authenticator - 101:Authenticator.userExists: UserID: rak- cmdb.isLocalUser(osUserID) returned
2019-01-26 13:45:36,656 DEBUG [http-bio-8443-exec-1] EMServiceServlet - 101: 137: atbabu: performHomeDeviceLogin for deviceName: SEPF8A5C59E1126
2019-01-26 13:45:36,656 INFO [http-bio-8443-exec-1] EMServiceServlet - 101: computeLoginDuration: Device: SEPF8A5C59E1126 EMCC Request: true EM API Request: false Duration Requested through EM API: -1
2019-01-26 13:45:36,658 INFO [http-bio-8443-exec-1] CMDatabase - CMDatabase.getEndUserEmMaxLoginTime() : SELECT EmMaxLoginTime FROM EndUser WHERE userid=? : parameters ( 'rak')
2019-01-26 13:45:36,659 INFO [http-bio-8443-exec-1] EMServiceServlet - Effective Login Duration :36000 seconds
2019-01-26 13:45:36,659 DEBUG [http-bio-8443-exec-1] DBRequestor - 101 : 137 : atbabu: performHomeDeviceLogin: Exceuting Stored Procedure:

    Solicitação para o mesmo usuário do segundo telefone

    2019-01-26 13:45:56,442 DEBUG [http-bio-8443-exec-8] EmccSaxHandler - EMURI = http%3A%2F%2F10.106.125.174%3A8080%2Femapp%2FEMAppServlet%3Fdevice%3DSEPB000B4BA01F1%26doLogout%3Dtrue
2019-01-26 13:45:56,442 DEBUG [http-bio-8443-exec-8] EMServiceServlet - 103: Parse Complete
2019-01-26 13:45:56,445 INFO [http-bio-8443-exec-8] EMServiceServlet - 103: Setting remoteIPAddr to connection IP=10.106.125.174
2019-01-26 13:45:56,445 INFO [http-bio-8443-exec-8] EMServiceServlet - 103 : 139 : atbabu: processEmccRequest: Received EMCC Home Cluster Login Request for :rak
2019-01-26 13:45:56,445 INFO [http-bio-8443-exec-8] EMServiceServlet - 103 : 139 : DeviceSecurityMode: 1 HomeCluster SecurityMode: 0
2019-01-26 13:45:56,445 INFO [http-bio-8443-exec-8] EMServiceServlet - 103: authenticate pin for rak
2019-01-26 13:45:56,469 INFO [http-bio-8443-exec-8] EMServiceServlet - 103 : 139 : atbabu: EmccHomeLogin : Performing Home Device Login for :rak
2019-01-26 13:45:56,469 INFO [http-bio-8443-exec-8] EmccData - 103: getRemoteClusterInfo: Pkid for cluster atbabu is d23ef9ea-8392-dbbf-61db-1d9e1d505243
2019-01-26 13:45:56,470 DEBUG [http-bio-8443-exec-8] EmccData - 103: getRemoteClusterInfo: Hostname = 10.106.125.174
2019-01-26 13:45:56,470 INFO [http-bio-8443-exec-8] Authenticator - 103:Authenticator.userExists: UserID: rak- Calling cmdb.isLocalUser(osUserID)...
2019-01-26 13:45:56,470 DEBUG [http-bio-8443-exec-8] CMDatabase - Userid being passed to the query is rak
2019-01-26 13:45:56,470 DEBUG [http-bio-8443-exec-8] CMDatabase - CMDatabase.isLocalUser() : SELECT islocaluser FROM EndUser WHERE my_lower(userid)= my_lower(?) : parameter ( 'rak' )
2019-01-26 13:45:56,476 DEBUG [http-bio-8443-exec-8] CMDatabase - PKID for the ROW is 
2019-01-26 13:45:56,477 DEBUG [http-bio-8443-exec-8] CMDatabase - CMDatabase.isLocalUser() : isLocaluser : true
2019-01-26 13:45:56,478 DEBUG [http-bio-8443-exec-8] CMDatabase - is Local user value :true
2019-01-26 13:45:56,478 INFO [http-bio-8443-exec-8] Authenticator - 103:Authenticator.userExists: UserID: rak- cmdb.isLocalUser(osUserID) returned
2019-01-26 13:45:56,478 DEBUG [http-bio-8443-exec-8] EMServiceServlet - 103: 139: atbabu: performHomeDeviceLogin for deviceName: SEPB000B4BA01F1
2019-01-26 13:45:56,478 INFO [http-bio-8443-exec-8] EMServiceServlet - 103: computeLoginDuration: Device: SEPB000B4BA01F1 EMCC Request: true EM API Request: false Duration Requested through EM API: -1
2019-01-26 13:45:56,482 INFO [http-bio-8443-exec-8] CMDatabase - CMDatabase.getEndUserEmMaxLoginTime() : SELECT EmMaxLoginTime FROM EndUser WHERE userid=? : parameters ( 'rak')
2019-01-26 13:45:56,485 INFO [http-bio-8443-exec-8] EMServiceServlet - Effective Login Duration :36000 seconds
2019-01-26 13:45:56,485 DEBUG [http-bio-8443-exec-8] DBRequestor - 103 : 139 : atbabu: performHomeDeviceLogin: Exceuting Stored Procedure:

    Visitando cluster

    Solicitação de login pela primeira vez do telefone (SEPF8A5C59E1126)

    2019-01-26 13:45:46,786 DEBUG [mjunnur ] EmccCommunicator - 137: postMsg - Url = https://10.106.106.200:8443/emservice/EMServiceServlet m_iHttpsTimeout = 120000
2019-01-26 13:45:47,055 DEBUG [mjunnur ] EmccCommunicator - 137: Retrieved actual user from remote cluster : 'rak'
2019-01-26 13:45:47,056 DEBUG [mjunnur ] EmccCommunicator - 137: performCheckUser: Num of DP is : 1
2019-01-26 13:45:47,056 DEBUG [mjunnur ] CheckUserThread - 137: PerformCheckUser: Home Cluster for UserId: rak is :https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 13:45:47,056 DEBUG [http-bio-8443-exec-7] EmccData - 137: cacheUserToCluster for user: rak
2019-01-26 13:45:47,057 INFO [http-bio-8443-exec-7] EMServiceServlet - 137: EmccLoginRequest: Home Cluster URL for User:rak is : https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 13:45:47,057 INFO [http-bio-8443-exec-7] EMServiceServlet - 137: EmccLoginRequest: Device Profile for this user is: Prerna-EM
2019-01-26 13:45:47,057 DEBUG [http-bio-8443-exec-7] EMServiceServlet - 137:getEmccLoginInfo - SEPF8A5C59E1126
2019-01-26 13:45:47,057 DEBUG [http-bio-8443-exec-7] DBRequestor - 137: getEmccLoginInfo: Query = execute function getEmccLoginInfo('SEPF8A5C59E1126')
2019-01-26 13:45:47,131 DEBUG [http-bio-8443-exec-7] DBRequestor - 137: <VEMAPP>

    Solicitação para o mesmo usuário do segundo telefone

    2019-01-26 13:46:06,784 DEBUG [mjunnur ] EmccCommunicator - 139: postMsg - Url = https://10.106.106.200:8443/emservice/EMServiceServlet m_iHttpsTimeout = 120000
2019-01-26 13:46:06,901 DEBUG [mjunnur ] EmccCommunicator - 139: Retrieved actual user from remote cluster : 'rak'
2019-01-26 13:46:06,902 DEBUG [mjunnur ] EmccCommunicator - 139: performCheckUser: Num of DP is : 1
2019-01-26 13:46:06,902 DEBUG [mjunnur ] CheckUserThread - 139: PerformCheckUser: Home Cluster for UserId: rak is :https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 13:46:06,902 DEBUG [http-bio-8443-exec-20] EmccData - 139: cacheUserToCluster for user: rak
2019-01-26 13:46:06,903 INFO [http-bio-8443-exec-20] EMServiceServlet - 139: EmccLoginRequest: Home Cluster URL for User:rak is : https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 13:46:06,903 INFO [http-bio-8443-exec-20] EMServiceServlet - 139: EmccLoginRequest: Device Profile for this user is: Prerna-EM
2019-01-26 13:46:06,903 DEBUG [http-bio-8443-exec-20] EMServiceServlet - 139:getEmccLoginInfo - SEPB000B4BA01F1
2019-01-26 13:46:06,903 DEBUG [http-bio-8443-exec-20] DBRequestor - 139: getEmccLoginInfo: Query = execute function getEmccLoginInfo('SEPB000B4BA01F1')
2019-01-26 13:46:06,909 DEBUG [http-bio-8443-exec-20] DBRequestor - 139: <VEMAPP>

    Login bem-sucedido

    2019-01-26 13:46:07,143 INFO [http-bio-8443-exec-20] EMServiceServlet - 139: EmccLoginRequest: Performing Visiting Device Login for :rak
2019-01-26 13:46:07,144 INFO [http-bio-8443-exec-20] EMServiceServlet - 139:performVisitingDeviceLogin - SEPB000B4BA01F1
2019-01-26 13:46:07,144 DEBUG [http-bio-8443-exec-20] DBRequestor - 139: performVisitingDeviceLogin: Query:
execute function visitingDeviceLogin('SEPB000B4BA01F1', 'mjunnur', 'http://10.106.125.174:8080/emapp/EMAppServlet?device=SEPB000B4BA01F1&doLogout=true', 'rak', '10.106.106.200', 'null', '10.106.106.200', 'null')
2019-01-26 13:46:07,166 DEBUG [http-bio-8443-exec-20] DBRequestor - 139: t
2019-01-26 13:46:07,167 DEBUG [http-bio-8443-exec-20] EMServiceServlet - 139: EmccLoginRequest: Result: 
<?xml version="1.0"?>
<response>
<success/>
</response>

    Caso 2: Comportamento de login múltiplo definido como Logins múltiplos não permitidos

    Cluster doméstico

    Solicitação para o primeiro usuário

    2019-01-26 14:34:43,093 INFO [http-bio-8443-exec-16] EMServiceServlet - 109 : 142 : atbabu: processEmccRequest: Received EMCC Home Cluster Login Request for :rak
2019-01-26 14:34:43,093 INFO [http-bio-8443-exec-16] EMServiceServlet - 109 : 142 : DeviceSecurityMode: 1 HomeCluster SecurityMode: 0
2019-01-26 14:34:43,093 INFO [http-bio-8443-exec-16] EMServiceServlet - 109: authenticate pin for rak
2019-01-26 14:34:43,112 INFO [http-bio-8443-exec-16] EMServiceServlet - 109 : 142 : atbabu: EmccHomeLogin : Performing Home Device Login for :rak
2019-01-26 14:34:43,112 INFO [http-bio-8443-exec-16] EmccData - 109: getRemoteClusterInfo: Pkid for cluster atbabu is d23ef9ea-8392-dbbf-61db-1d9e1d505243
2019-01-26 14:34:43,112 DEBUG [http-bio-8443-exec-16] EmccData - 109: getRemoteClusterInfo: Hostname = 10.106.125.174
2019-01-26 14:34:43,112 INFO [http-bio-8443-exec-16] Authenticator - 109:Authenticator.userExists: UserID: rak- Calling cmdb.isLocalUser(osUserID)...
2019-01-26 14:34:43,112 DEBUG [http-bio-8443-exec-16] CMDatabase - Userid being passed to the query is rak
2019-01-26 14:34:43,113 DEBUG [http-bio-8443-exec-16] CMDatabase - CMDatabase.isLocalUser() : SELECT islocaluser FROM EndUser WHERE my_lower(userid)= my_lower(?) : parameter ( 'rak' )
2019-01-26 14:34:43,119 DEBUG [http-bio-8443-exec-16] CMDatabase - PKID for the ROW is 
2019-01-26 14:34:43,119 DEBUG [http-bio-8443-exec-16] CMDatabase - CMDatabase.isLocalUser() : isLocaluser : true
2019-01-26 14:34:43,119 DEBUG [http-bio-8443-exec-16] CMDatabase - is Local user value :true
2019-01-26 14:34:43,120 INFO [http-bio-8443-exec-16] Authenticator - 109:Authenticator.userExists: UserID: rak- cmdb.isLocalUser(osUserID) returned
2019-01-26 14:34:43,120 DEBUG [http-bio-8443-exec-16] CMDatabase - Userid being passed to the query is rak
2019-01-26 14:34:43,122 INFO [http-bio-8443-exec-16] CMDatabase - CMDatabase:getLoggedInDeviceNames: query=SELECT decode(d.tkclass,249,emcd.devicename,d.name) name FROM Device d left outer join emccdynamic emcd on d.pkid = emcd.fkdevice INNER JOIN extensionmobilitydynamic emd ON d.pkid=emd.fkdevice AND emd.fkenduser= ? AND emd.logintime is NOT NULL AND D.tkDeviceProfile=0 : parameter ( '952a2d32-14e5-fd43-d192-742c4a50d5ab' )
2019-01-26 14:34:43,129 DEBUG [http-bio-8443-exec-16] EMServiceServlet - 109: 142: atbabu: performHomeDeviceLogin for deviceName: SEPF8A5C59E1126


    A segunda vez em que o mesmo usuário não é permitido.

    2019-01-26 14:38:05,841 ERROR [http-bio-8443-exec-12] EMServiceServlet - 111: Not allowed to log into multiple devices.
2019-01-26 14:38:05,841 INFO [http-bio-8443-exec-12] EMServiceServlet - 111: EmccRequest Processing Time: 38
2019-01-26 14:38:05,842 ERROR [http-bio-8443-exec-12] EMServiceServlet - 111: Error processing EMCC request :com.cisco.emservice.PolicyValidatorException: Not allowed to log into multiple devices.
2019-01-26 14:38:05,842 DEBUG [http-bio-8443-exec-12] EMServiceServlet - 111: EMCC: Decrement Counter
2019-01-26 14:38:05,842 INFO [http-bio-8443-exec-12] Counters - 111: Counters -->111,31,4,18,0,0,0,15,3,0,33,0,71,3,0


    Visitando cluster

    2019-01-26 14:34:53,341 DEBUG [mjunnur ] EmccCommunicator - 142: postMsg - Url = https://10.106.106.200:8443/emservice/EMServiceServlet m_iHttpsTimeout = 120000
2019-01-26 14:34:53,558 DEBUG [mjunnur ] EmccCommunicator - 142: Retrieved actual user from remote cluster : 'rak'
2019-01-26 14:34:53,558 DEBUG [mjunnur ] EmccCommunicator - 142: performCheckUser: Num of DP is : 1
2019-01-26 14:34:53,558 DEBUG [mjunnur ] CheckUserThread - 142: PerformCheckUser: Home Cluster for UserId: rak is :https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 14:34:53,559 DEBUG [http-bio-8443-exec-16] EmccData - 142: cacheUserToCluster for user: rak
2019-01-26 14:34:53,560 INFO [http-bio-8443-exec-16] EMServiceServlet - 142: EmccLoginRequest: Home Cluster URL for User:rak is : https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 14:34:53,560 INFO [http-bio-8443-exec-16] EMServiceServlet - 142: EmccLoginRequest: Device Profile for this user is: Prerna-EM
2019-01-26 14:34:53,560 DEBUG [http-bio-8443-exec-16] EMServiceServlet - 142:getEmccLoginInfo - SEPF8A5C59E1126
2019-01-26 14:34:53,560 DEBUG [http-bio-8443-exec-16] DBRequestor - 142: getEmccLoginInfo: Query = execute function getEmccLoginInfo('SEPF8A5C59E1126')
2019-01-26 14:34:53,576 DEBUG [http-bio-8443-exec-16] DBRequestor - 142: <VEMAPP>

    Login bem-sucedido.

    2019-01-26 14:34:53,822 DEBUG [http-bio-8443-exec-16] EMServiceServlet - 142: EmccLoginRequest: Result: 
<?xml version="1.0"?>
<response>
<success/>
</response>


    Solicite o login do segundo telefone.

    2019-01-26 14:38:16,081 DEBUG [mjunnur ] EmccCommunicator - 145: postMsg - Url = https://10.106.106.200:8443/emservice/EMServiceServlet m_iHttpsTimeout = 120000
2019-01-26 14:38:16,287 DEBUG [mjunnur ] EmccCommunicator - 145: Retrieved actual user from remote cluster : 'rak'
2019-01-26 14:38:16,288 DEBUG [mjunnur ] EmccCommunicator - 145: performCheckUser: Num of DP is : 1
2019-01-26 14:38:16,288 DEBUG [mjunnur ] CheckUserThread - 145: PerformCheckUser: Home Cluster for UserId: rak is :https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 14:38:16,290 DEBUG [http-bio-8443-exec-2] EmccData - 145: cacheUserToCluster for user: rak
2019-01-26 14:38:16,291 INFO [http-bio-8443-exec-2] EMServiceServlet - 145: EmccLoginRequest: Home Cluster URL for User:rak is : https://10.106.106.200:8443/emservice/EMServiceServlet
2019-01-26 14:38:16,291 INFO [http-bio-8443-exec-2] EMServiceServlet - 145: EmccLoginRequest: Device Profile for this user is: Prerna-EM
2019-01-26 14:38:16,291 DEBUG [http-bio-8443-exec-2] EMServiceServlet - 145:getEmccLoginInfo - SEPB000B4BA01F1
2019-01-26 14:38:16,292 DEBUG [http-bio-8443-exec-2] DBRequestor - 145: getEmccLoginInfo: Query = execute function getEmccLoginInfo('SEPB000B4BA01F1')
2019-01-26 14:38:16,328 DEBUG [http-bio-8443-exec-2] DBRequestor - 145: <VEMAPP>

    O segundo usuário não tem permissão para fazer login.

    2019-01-26 14:38:16,449 DEBUG [http-bio-8443-exec-2] EmccCommunicator - 145: parseHomeLoginResponse
2019-01-26 14:38:16,452 ERROR [http-bio-8443-exec-2] EmccCommunicator - 145: handleEmccErrorResponse - 25: Not allowed to log into multiple devices.
2019-01-26 14:38:16,452 ERROR [http-bio-8443-exec-2] EMServiceServlet - 145: Not allowed to log into multiple devices.
2019-01-26 14:38:16,452 INFO [http-bio-8443-exec-2] EMServiceServlet - 145: EmccRequest Processing Time: 438
2019-01-26 14:38:16,453 ERROR [http-bio-8443-exec-2] EMServiceServlet - 145: Error processing EMCC request :com.cisco.emservice.MyException: Not allowed to log into multiple devices.
2019-01-26 14:38:16,453 DEBUG [http-bio-8443-exec-2] EMServiceServlet - 145: EMCC: Decrement Counter
2019-01-26 14:38:16,453 INFO [http-bio-8443-exec-2] Counters - 145: Counters -->145,96,29,10,0,0,0,33,34,0,0,0,32,0,21

    Caso 3: Comportamento de login múltiplo definido como Logoff automático

    Cluster doméstico

    2019-01-26 15:24:47,080 INFO [Thread-6861 ] EmccVisitingLogoutThread - 117EmccLogoutThread: Logout Request sent to visitng cluster :
https://10.106.125.176:8443/emservice/EMServiceServlet
2019-01-26 15:24:47,080 DEBUG [Thread-6861 ] EmccCommunicator - 117: performDoLogout
2019-01-26 15:24:47,080 DEBUG [Thread-6861 ] EmccCommunicator - 117: formVisitingLogoutXml :
<emcc><visitingLogout><requestNum>117</requestNum><deviceName>SEPF8A5C59E1126</deviceName><clusterId>mjunnur</clusterId></visitingLogout></emcc>
2019-01-26 15:24:47,080 DEBUG [Thread-6861 ] EmccCommunicator - 117: postMsg - Url = https://10.106.125.176:8443/emservice/EMServiceServlet m_iHttpsTimeout = 0
2019-01-26 15:24:47,139 DEBUG [http-bio-8443-exec-12] DBRequestor - 117: t
2019-01-26 15:24:47,140 INFO [http-bio-8443-exec-12] LogoutScheduler - 117: LogoutScheduler.removeLogout(): Dev: SEPF8A5C59E1126- removed logout
2019-01-26 15:24:47,140 INFO [http-bio-8443-exec-12] DBRequestor - 117: DBRequestor.logoutDevName: Dev: SEPF8A5C59E1126- deviceLogout returned
2019-01-26 15:24:47,141 DEBUG [http-bio-8443-exec-12] EMServiceServlet - 117: 151: atbabu: performHomeDeviceLogin for deviceName: SEPB000B4BA01F1
2019-01-26 15:24:47,141 INFO [http-bio-8443-exec-12] EMServiceServlet - 117: computeLoginDuration: Device: SEPB000B4BA01F1 EMCC Request: true EM API Request: false Duration Requested through EM API: -1
2019-01-26 15:24:47,143 INFO [http-bio-8443-exec-12] CMDatabase - CMDatabase.getEndUserEmMaxLoginTime() : SELECT EmMaxLoginTime FROM EndUser WHERE userid=? : parameters ( 'rak')
2019-01-26 15:24:47,152 INFO [http-bio-8443-exec-12] EMServiceServlet - Effective Login Duration :36000 seconds

    Para configurar EM, consulte este link:

    http://www.learncisco.net/courses/cucm-basics/mobility-features/extension-mobility-configuration.html

    Para obter a configuração completa do EMCC, consulte este link:

    https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200599-Enable-UC-servers-for-Extension-Mobility.html

    TAC Authored

    Colaborado por engenheiros da Cisco

    • Prerna Bagga
      Cisco TAC Engineer

    Este documento lhe foi útil?

    FeedbackFeedback

    Contate a Cisco

    Este documento se refere a estes produtos