例
次に、単一の T1 チャネルに対する brief キーワードを指定した show controllers t1 コマンドの出力例を示します。
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1 brief
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
Alarm Soaking Interval:
Alarm Declaring= 2500 msec
Alarm clearing = 10000 msec
Bert Test on controller port : T1 0/4/2/0/1
BERT test result (not running)
Test Pattern : Not Configured, Status : not running, Sync Detected : 0
Interval : 1 minute(s), Time Remain : 0 (ms)
Bit Errors (since BERT started): 0 bits,
Bits Received (since BERT started): 0 Kbits
Bit Errors (since last sync): 0 bits
Bits Received (since last sync): 0 Kbits
表 4 show controllers t1 brief のフィールドの説明
フィールド |
説明 |
T1 0/4/2/0/1 is up |
T1 チャネルが動作しています。 チャネル状態は、アップ、ダウン、または管理上のダウンである可能性があります。 ループバック状態が (Locally Looped) または (Remotely Looped) によって示されます。 |
mode |
T1 コントローラのモード。ATM である可能性があります。 |
timeslots |
T1 チャネルに割り当てられている DS0 タイムスロット。 |
FDL per spec-name spec. |
パフォーマンス モニタリングは、ANSI T1.403 仕様または AT&T 標準仕様番号 54016 に基づくファシリティ データ リンクを介して行われます。 |
Receiver has no alarms. |
T1 コントローラによって検出されたしたアラームは、ここに表示されます。 表示される可能性のあるアラームは次のとおりです。
-
Transmitter is sending remote alarm.
-
Transmitter is sending AIS.
-
Receiver has loss of signal.
-
Receiver is getting AIS.
-
Receiver has loss of frame.
-
Receiver has remote alarm.
-
Receiver has no alarms.
|
Framing |
チャネライズド コントローラでのフレーミング タイプ。 値は、ESF または SF です。 |
Line Code |
チャネライズド コントローラのライン コーディング形式。 値は AMI または B8ZS です。 |
Clock Source |
T1 チャネルのクロック ソース。 値は internal または line です。 |
Alarm Soaking Interval |
次のアラーム ソーキング間隔の値:
-
Alarm declarings:アラームが宣言されるまでの時間(ミリ秒)。
-
Alarm clearing:アラームがクリアされるまでの時間(ミリ秒)。
|
Bert Test on controller port |
BERT テストを実行できるコントローラ ポートを示します。 |
BERT test result |
現在のテストの状態を表します。 次のいずれかです。
-
running:BER テストが進行中です。
-
done:BER テストが完了しました。
-
not running:BER テストはコントローラ上で実行されていません。
|
Test Pattern |
ユーザがテストに選択したテスト パターンを示します。 |
Status |
現在の同期状態(sync)を示します。 |
Sync Detected |
このテストの間に同期が検出された回数を示します。 |
Interval |
テストの時間を示します。 |
Time Remain |
実行されているテストの残り時間を示します。
(注) |
BER テストを終了すると、次のようなメッセージが表示されます。「Time Remain : 2 minute(s) (unable to complete) "(Unable to complete)" signifies that you interrupted the test.」 |
|
Bit Errors (since BERT started) |
テストが開始されてから検出されたビット エラー。 |
Bits Received (since BERT started) |
テストの開始以降に受信したテスト ビットの総数。 |
Bit Errors (since last sync) |
同期が開始されてから検出されたビット エラー。 |
Bits Received (since last sync) |
同期の開始以降に受信したテスト ビットの総数。 |
次に、単一の T1 チャネルに対する show controllers t1 コマンドの出力例を示します。
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
Data in current interval (38 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
Data in Interval 2:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs, 0 Stuffed Secs
0 Near-end path failures, 0 Far-end path failures, 0 SEF/AIS Secs
.
.
.
次に、単一の T1 チャネルに対する tabular キーワードを指定した show controllers t1 コマンドの出力例を示します。
RP/0/RSP0/CPU0:router# show controllers t1 0/4/2/0/1 tabular
T1 0/4/2/0/1 is up
mode: ATM
timeslots: 1-24
FDL per AT&T 54016 spec.
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Clock Source is internal
INTERVAL LCV PCV CSS SEFS LES DM ES BES SES UAS SSS
08:30-08:35 0 0 0 0 0 0 0 0 0 0 0
08:15-08:30 0 0 0 0 0 0 0 0 0 0 0
08:00-08:15 0 0 0 0 0 0 0 0 0 0 0
07:45-08:00 0 0 0 0 0 0 0 0 0 0 0
07:30-07:45 0 0 0 0 0 0 0 0 0 0 0
07:15-07:30 0 0 0 0 0 0 0 0 0 0 0
07:00-07:15 0 0 0 0 0 0 0 0 0 0 0
06:45-07:00 0 0 0 0 0 0 0 0 0 0 0
06:30-06:45 0 0 0 0 0 0 0 0 0 0 0
06:15-06:30 0 0 0 0 0 0 0 0 0 0 0
06:00-06:15 0 0 0 0 0 0 0 0 0 0 0
05:45-06:00 0 0 0 0 0 0 0 0 0 0 0
05:30-05:45 0 0 0 0 0 0 0 0 0 0 0
05:15-05:30 0 0 0 0 0 0 0 0 0 0 0
.
.
.
表 5 show controllers t1 および show controllers t1 tabular のフィールドの説明
フィールド |
説明 |
T1 0/4/2/0/1 is up |
T1 チャネルが動作しています。 チャネル状態は、アップ、ダウン、または管理上のダウンである可能性があります。 ループバック状態が (Locally Looped) または (Remotely Looped) によって示されます。 |
mode |
T1 コントローラのモード。ATM である可能性があります。 |
timeslots |
T1 チャネルに割り当てられている DS0 タイムスロット。 |
FDL per spec-name spec. |
パフォーマンス モニタリングは、ANSI T1.403 仕様または AT&T 標準仕様番号 54016 に基づくファシリティ データ リンクを介して行われます。 |
Receiver has no alarms. |
T1 コントローラによって検出されたしたアラームは、ここに表示されます。 表示される可能性のあるアラームは次のとおりです。
-
Transmitter is sending remote alarm.
-
Transmitter is sending AIS.
-
Receiver has loss of signal.
-
Receiver is getting AIS.
-
Receiver has loss of frame.
-
Receiver has remote alarm.
-
Receiver has no alarms.
|
Framing |
チャネライズド コントローラでのフレーミング タイプ。 値は、ESF または SF です。 |
Line Code |
チャネライズド コントローラのライン コーディング形式。 値は AMI または B8ZS です。 |
Clock Source |
T1 チャネルのクロック ソース。 値は internal または line です。 |
Data in current interval (seconds elapsed) |
15 分ごとに 24 時間の蓄積となる現在の累積時間を示します。 累積時間は 1 ~ 900 秒です。 最も古い 15 分間は 24 時間の累積バッファの背面から削除されます。 |
Line Code Violations |
ライン コード違反(LCV)は、累積時間に発生したバイポーラ違反(BPV)および過剰ゼロ(EXZ)の両方のカウントです。 EXZ は、ゼロ文字列の長さに関係なく LCV を 1 つずつ増加します。 |
Slip Secs |
制御スリップ秒数(CSS)は、1 つ以上の制御スリップを含む 1 秒間隔です。 |
Fr Loss Secs |
フレーム損失秒数(SELS)は、out-of-frame エラーが検出された秒数です。 |
Line Err Secs |
ライン エラー秒数(LES)は、1 つ以上のライン コード違反が検出された秒数です。 |
Degraded Mins |
劣化した分(DM)は、推定エラー レートが 1E-6 を超え、1E-3 を超えない分数です。 詳細については、RFC 1406 の「Definitions of Managed Objects for DS1 and E1 Interface Types」を参照してください。 |
Errored Secs |
エラー秒数(ES)は、1 つ以上のパス符号違反、1 つ以上の out-of-frame 障害、1 つ以上の制御スリップ イベントまたは検出された AIS 障害があった秒数です。 |
Bursty Err Secs |
バースト エラー秒数(BES)は、320 未満で 1 つ以上のパス符号違反エラー イベントがあり、重大エラー フレーム障害がなく、着信 AIS 障害がなかった秒数です。 制御スリップはこのパラメータに含まれません。 |
Severely Err Secs |
重大エラー秒数(SES)は、320 以上のパス符号違反、1 つ以上の out-of-frame 障害、または 1 つ以上の検出された AIS 障害があった秒数です。 |
Unavailable Secs |
インターフェイスがこの間隔で使用可能ではなかった UAS と呼ばれる秒数。 |
Stuffed Secs |
スタッフ秒数(SSS)は、もう 1 つのビット スタッフィングが実行された秒数です。 これは、パルス密度エンフォーサーが出力ストリームの潜在的な違反を検出し、それを避けるため、1 を挿入すると発生します。 このようなビット スタッフィングは、ユーザ データを破損させ、ネットワークが不適切に設定されていることを示します。 この状況を診断するためにこのカウンタを使用できます。 |
Near-end path failures |
近端パス障害の合計数。 |
Far-end path failures |
遠端パス障害の合計数。 |
SEF/AIS Secs |
重大エラー フレーミング(SEF)およびアラーム表示信号(AIS)エラーの合計数。 |