HP-UX iSCSI ホストと MDS/IPS-8 間の設定例

ダウンロードオプション

PDF (430.9 KB)
Adobe Reader を使ってさまざまなデバイスで表示
ePub (274.3 KB)
iPhone、iPad、Android、ソニーの Reader、または Windows Phone 上で、さまざまなアプリを使って表示
Mobi (Kindle) (308.8 KB)
Kindle デバイスで、または Kindle アプリを使って複数のデバイスで表示

Updated: 2018 年 10 月 8 日

Document ID:46243

偏向のない言語

この製品のドキュメントセットは、偏向のない言語を使用するように配慮されています。このドキュメントセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージの取り組みの詳細は、こちらをご覧ください。

翻訳について

シスコは世界中のユーザにそれぞれの言語でサポートコンテンツを提供するために、機械と人による翻訳を組み合わせて、本ドキュメントを翻訳しています。ただし、最高度の機械翻訳であっても、専門家による翻訳のような正確性は確保されません。シスコは、これら翻訳の正確性について法的責任を負いません。原典である英語版（リンクからアクセス可能）もあわせて参照することを推奨します。

内容

概要

前提条件

要件

使用するコンポーネント

表記法

背景説明

設定

ネットワーク図

設定

確認

HP-UX ホストのコマンド

MDS/IPS-8 のコマンド

トラブルシュート

Fabric Manager および Device Manager の表示

概要

サーバに存在する Cisco iSCSI ドライバは、iSCSI ソリューションの主要コンポーネントです。この iSCSI ドライバは、Small Computer Systems Interface（SCSI）コマンドの代行受信、IP パケットへのカプセル化、Cisco SN 5420、Cisco SN 5428、Cisco SN 5428-2、または Cisco MDS/IPS-8 へのリダイレクトを実行します。このドキュメントでは SN 5428 に対する HP-UX の iSCSI ホストの設定例を紹介します。

前提条件

要件

この設定を開始する前に、次の要件が満たされていることを確認してください。

HP-UXバージョンと互換性のあるiSCSIドライバをインストールしてください。ドライバの最新バージョンは、Cisco.comのCisco iSCSIドライバ(登録ユーザ専用)ダウンロードページにあります。README.txt ファイルはドライバ zip（tar）ファイルに含まれています。README ファイルには、ライセンス契約、ドライバのインストール手順と設定手順、およびドライバアーキテクチャの技術概要が含まれています。
オペレーティングシステムの要件とパッチの要件については、『HP-UX 用の Cisco iSCSI ドライバのリリースノート』の「システム要件」セクションを参照してください。

使用するコンポーネント

このドキュメントの情報は、次のソフトウェアとハードウェアのバージョンに基づいています。

2 基のプロセッサを搭載した HP-UX 9000/800 A500 サーバ

注：この実習セットアップでは、iSCSI用のイーサネットアダプタは個別に用意されておらず、使用中のイーサネットアダプタは100 Mbです。実際の環境では、iSCSI イニシエータとして個別の Gigabit Ethernet（GE; ギガビットイーサネット）アダプタを使用します。

[/]#/opt/ignite/bin/print_manifest[...] 
System Hardware 
    Model:              9000/800/A500-5X 
    Main Memory:        1024 MB 
    Processors:         2 
    OS mode:            64 bit 
    LAN hardware ID:    0x00306E1B6F51 
    Software ID:        586760518 
    Keyboard Language:  Not_Applicable 

    Storage devices                  HW Path      Interface  
    SEAGATE ST318404LC 17366 Mb      0/0/1/1.15.0 SCSI C896 Ultra Wide Single-Ended  
    SEAGATE ST318203LC 17366 Mb      0/0/2/1.15.0 SCSI C875 Ultra Wide Single-Ended  

    I/O Interfaces 
    Class          H/W Path       Driver         Description  
    lan            0/0/0/0        btlan3         HP PCI 10/100Base-TX Core  
    ext_bus        0/0/1/0        c720           SCSI C896 Ultra Wide LVD  
    ext_bus        0/0/1/1        c720           SCSI C896 Ultra Wide Single-Ended  
    ext_bus        0/0/2/0        c720           SCSI C875 Fast Wide Single-Ended  
    ext_bus        0/0/2/1        c720           SCSI C875 Ultra Wide Single-Ended  
    tty            0/0/4/0        asio0          PCI Serial (103c1048)  
    tty            0/0/5/0        asio0          PCI Serial (103c1048)  
    fc             0/2/0/0        td             HP Tachyon XL2 Fibre Channel Mass Storage Adapter  
  
Installed Software 

    Your system was installed with HP-UX version B.11.00. 

    Your system has the following software products installed and  
    configured on the system disk drive(s).  

    Product          Revision          Description  
    A6795A           B.11.00.10        PCI Tachyon TL/TS/XL2 Fibre Channel  
    BUNDLE           B.11.00           Patch Bundle  
    HPUXEng64RT      B.11.00.01        English HP-UX 64-bit Runtime Environment  
    HWE1100          B.11.00.0203.5    Hardware Enablement Patches for HP-UX 11.00, March 2002  
    OnlineDiag       B.11.00.20.09     HPUX 11.0 Support Tools Bundle, Mar 2002  
    UXCoreMedia      B.11.00.02        HP-UX Media Kit (Reference Only. See Description)  
    UnlimUserLic     B.11.00.02        HP-UX Unlimited-User License  
    XSWGR1100        B.11.00.47.08     General Release Patches, November 1999 (ACE)  
[...]

HP-UX 用の Cisco iSCSI ドライバ 3.3.3 が使用されました。HP から（少なくとも）最新の安定したアドレス解決プロトコル（ARPA）のトランスポート累積パッチもインストールすることを推奨します。このドキュメントが書かれた時、これはPHNE_28538でした。このパッチには複数の依存関係があるため、必要に応じてインストールする必要があります。インストールの詳細については、公式HPサポートサイト (登録ユーザ専用)を参照してください。

[/]# swlist 
# Initializing... 
# Contacting target "ape"... 
# 
# Target:  ape:/ 
# 
# 
# Bundle(s): 
# 

  A6795A                        B.11.00.10     PCI Tachyon TL/TS/XL2 Fibre Channel 
  BUNDLE                        B.11.00        Patch Bundle 
  HPUXEng64RT                   B.11.00.01     English HP-UX 64-bit Runtime Environment 
  HWE1100                       B.11.00.0203.5 Hardware Enablement Patches for HP-UX 11.00, March 2002 
  OnlineDiag                    B.11.00.20.09  HPUX 11.0 Support Tools Bundle, Mar 2002 
  QPK1100                       B.11.00.56.5   Quality Pack for HP-UX 11.00, March 2002 
  UXCoreMedia                   B.11.00.02     HP-UX Media Kit (Reference Only. See Description) 
  UnlimUserLic                  B.11.00.02     HP-UX Unlimited-User License 
  XSWGR1100                     B.11.00.47.08  General Release Patches, November 1999 (ACE) 
# 
# Product(s) not contained in a Bundle: 
# 

  ISCSI                         3.3.3          ISCSI software 
  bison                         1.875          bison 
  flex                          2.5.4a         flex 
  gcc                           3.2.3          gcc 
  gettext                       0.11.5         gettext 
  less                          376            less 
  libiconv                      1.9            libiconv 
  make                          3.80           make 
  ncurses                       5.2            ncurses 
  termcap                       1.3.1          termcap 
  zsh                           4.0.7          zsh 


[/]# swlist BUNDLE
# Initializing...
# Contacting target "ape"...
#
# Target:  ape:/
#

# BUNDLE                B.11.00        Patch Bundle   
  BUNDLE.PHCO_23651     1.0            fsck_vxfs(1M) cumulative patch 
  BUNDLE.PHKL_28496     1.0            SCSI IO Subsystem Cumulative Patch 
  BUNDLE.PHKL_27980     1.0            VxFS 3.1 cumulative patch: CR_EIEM 
  BUNDLE.PHKL_22840     1.0            IDS/9000; syscalls related to file/socket 
  BUNDLE.PHCO_28505     1.0            user/group(add/mod/del)(1M) cumulative patch 
  BUNDLE.PHKL_28150     1.0            LVM Cumulative Patch w/Performance Upgrades 
  BUNDLE.PHNE_28538     1.0            cumulative ARPA Transport patch 
  BUNDLE.PHNE_28143     1.0            LAN product cumulative patch 
  BUNDLE.PHNE_27902     1.0            Cumulative STREAMS Patch 
  BUNDLE.PHKL_29434     1.0            POSIX AIO;getdirentries;MVFS;rcp;mmap/IDS; 
  BUNDLE.PHKL_28766     1.0            Probe,IDDS,PM,VM,PA-8700,AIO,T600,FS,PDC,CLK 
  BUNDLE.PHKL_28004     1.0            Fibre Channel Mass Storage Driver Patch 
  BUNDLE.PHKL_27729     1.0            ioscan -u incorrect display (kernel patch). 
  BUNDLE.PHKL_24187     1.0            ioscan performance gain for SCSI Subsystem 
  BUNDLE.PHKL_24165     1.0            Kernel Patch For "ioscan -k" Performance 
  BUNDLE.PHKL_23409     1.0            NFS, Large Data Space, kernel memory leak 
  BUNDLE.PHKL_20016     1.0            2nd CPU not recognized in G70/H70/I70 
  BUNDLE.PHKL_18543     1.0            PM/VM/UFS/async/scsi/io/DMAPI/JFS/perf patch 
  BUNDLE.PHCO_27818     1.0            ioscan(1M) cumulative patch 
  BUNDLE.PHCO_27375     1.0            cumulative SAM/ObAM patch

ソフトウェアバージョン 1.2(1a) を搭載した Cisco MDS 9216。

vatican# show module 
Mod  Ports  Module-Type                     Model              Status 
---  -----  ------------------------------- ------------------ ------------ 
1    16     1/2 Gbps FC/Supervisor          DS-X9216-K9-SUP    active * 
2    8      IP Storage Module               DS-X9308-SMIP      ok 
Mod  Sw           Hw      World-Wide-Name(s) (WWN) 
---  -----------  ------  -------------------------------------------------- 
1    1.2(1a)      1.0     20:01:00:0c:30:57:5e:c0 to 20:10:00:0c:30:57:5e:c0  
2    1.2(1a)      0.2     20:41:00:0c:30:57:5e:c0 to 20:48:00:0c:30:57:5e:c0  

Mod  MAC-Address(es)                         Serial-Num 
---  --------------------------------------  ---------- 
1    00-0b-be-f8-7f-00 to 00-0b-be-f8-7f-04  JAB070804Q3 
2    00-05-30-00-a8-56 to 00-05-30-00-a8-62  JAB070205AM 

* this terminal session  

vatican# show version 
Cisco Storage Area Networking Operating System (SAN-OS) Software 
TAC support: http://www.cisco.com/tac 
Copyright (c) 2002-2003 by Cisco Systems, Inc. All rights reserved. 
The copyright for certain works contained herein are owned by 
Andiamo Systems, Inc. and/or other third parties and are used and 
distributed under license. 
 
Software
  BIOS:      version 1.0.8
  loader:    version 1.1(2)
  kickstart: version 1.2(1a)
  system:    version 1.2(1a)

  BIOS compile time:       08/07/03
  kickstart image file is: bootflash:/k121a
  kickstart compile time:  9/1/2003 17:00:00
  system image file is:    bootflash:/s121a
  system compile time:     9/1/2003 17:00:00

Hardware 
  RAM 963108 kB 

  bootflash: 500736 blocks (block size 512b) 
  slot0:          0 blocks (block size 512b) 

  vatican uptime is 1 days 6 hours 17 minute(s) 25 second(s) 

  Last reset at 955065 usecs after Wed Sep 10 08:13:50 2003 
    Reason: Reset Requested by CLI command reload 
    System version: 1.1(2)

このドキュメントの情報は、特定のラボ環境にあるデバイスに基づいて作成されました。このドキュメントで使用するすべてのデバイスは、初期（デフォルト）設定の状態から起動しています。対象のネットワークが実稼働中である場合には、どのようなコマンドについても、その潜在的な影響について確実に理解しておく必要があります。

表記法

このドキュメントで使用する Cisco MDS 9000 は、MDS 9000 ファミリ（MDS 9506、MDS 9509、MDS 9216）に含まれるすべてのファイバチャネル（FC）スイッチ製品を指します。 Cisco 侵入防御システム（IPS）ブレードは IP ストレージサービスモジュールを指します。ドキュメント表記の詳細は、「シスコテクニカルティップスの表記法」を参照してください。

背景説明

Cisco 侵入防御システム（IPS）のモジュールはファイバチャネル（FC）ストレージデバイスへの IP ホストアクセスを提供します。IPS モジュールは DS-X9308-SMIP です。これはトランスペアレント SCSI ルーティングを提供します。iSCSI プロトコルを使用する IP ホストは、FC ネットワークの iSCSI ターゲットにトランスペアレントにアクセスできます。IP ホストは TCP/IP 接続経由で MDS 9000 IPS ポートに iSCSI プロトコルデータユニット（PDU）でカプセル化された SCSI コマンドを送信します。IPS モジュールでは、適切に設定された GE インターフェイスの形式で接続が提供されます。IPS モジュールは仮想 iSCSI ターゲットを作成して、これらを FC SAN で使用可能な物理 FC ターゲットにマッピングできるようにします。IP ネットワークに物理的なターゲットが接続されているかのように、IP ホストに FC ターゲットを示します。

IPS モジュールを介してストレージにアクセスする必要がある各 iSCSI ホストには、互換性のある iSCSI ドライバをインストールしておく必要があります。iSCSI プロトコルを使用して、iSCSI ドライバは、iSCSI ホストからの SCSI の要求と応答を IP ネットワークを介して転送できます。ホストのオペレーティングシステムからは、iSCSI ドライバは、ホストのペリフェラルチャネルの FC ドライバのような SCSI トランスポートドライバであるように見えます。ストレージデバイスからは、各 IP ホストは FC ホストであるように見えます。IP ホストから FC ストレージデバイスへのルーティングでは、主に次の処理が実行されます。

ホストと IPS モジュール間の IP ネットワーク経由で iSCSI 要求および iSCSI 応答を転送します。
IP ネットワークのホストと FC ストレージデバイス間の SCSI 要求および SCSI 応答をルーティングします（iSCSI から FCP へ、および FCP から iSCSI へ）。このルーティングは IPS モジュールによって実行されます。
IPS モジュールと FC ストレージデバイス間の FCP 要求または FCP 応答を転送します。

IPS モジュールは、デフォルトで FC ターゲットを iSCSI にインポートしません。IPS モジュールが FC ターゲットを iSCSI イニシエータで使用可能にする前に、ダイナミックマッピングかスタティックマッピングを設定する必要があります。両方が設定されている場合、スタティックマッピングの FC ターゲットには設定された名前があります。このドキュメントでは、スタティックマッピングの例を紹介しています。ダイナミックマッピングでは、iSCSI ホストが IPS モジュールに接続するたびに新しい FC N ポートが作成され、この N のポートに割り当てられた nWWN と pWWN は異なる場合があります。iSCSI ホストが IPS モジュールに接続するたびに同じ nWWN と pWWN を取得する必要がある場合は、スタティックマッピング方式を使用します。スタティックマッピングは、イニシエータの pWWN または nWWN に基づいたアクセスコントロールと論理ユニット番号（LUN）マッピング/マスキング設定があるインテリジェント FC ストレージアレイにアクセスするために、IPS モジュールで使用できます。

ターゲットがアドバタイズされる IPS ポートの個別リストの作成およびターゲットにアクセス可能な iSCSI の発信側ノード名のリストの作成によって、スタティックマッピングされた各 iSCSI ターゲットへのアクセスを制御できます。FC のゾーン分割ベースのアクセス制御と iSCSI ベースのアクセス制御は、iSCSI にアクセス制御を提供できる 2 つのメカニズムです。両方の方法を同時に使用できます。この設定では、デフォルトのゾーン分割は特定の VSAN で許可されています。IPS モジュールは iSCSI のノード名ベースと FC のゾーン分割ベースのアクセスコントロールリストの両方を使用し、iSCSI 検出と iSCSI セッションの作成時のアクセス制御を強化します。

iSCSI の検出：iSCSI のホストがすべての iSCSI ターゲットの iSCSI の検出セッションとクエリーを作成すると、IPS モジュールはアクセスコントロールポリシーに基づいて、この iSCSI ホストによるアクセスが許可された iSCSI ターゲットのリストのみを返します。
iSCSI セッションの作成：IP ホストが iSCSI セッションを開始すると、IPS モジュールは指定された iSCSI ターゲット（セッションのログイン要求で）がスタティックマッピングされたターゲットであるかどうかを確認します。そうである場合は、IP ホストの iSCSI ノード名がターゲットへのアクセスを許可されているかどうかを確認します。IP ホストにアクセスが許可されていない場合は、ログインが拒否されます。

IPS モジュールは、この IP ホストの FC の仮想 N ポート（N ポートがすでに存在する場合があります）を作成し、IP ホストによってアクセスされる FC ターゲット pWWN の FCID のために FC ネームサーバのクエリーを実行します。ネームサーバクエリーの要求者として IP ホストの仮想 N ポートの pWWN が使用されます。したがって、ネームサーバは pWWN のゾーン指定クエリーを実行し、クエリーに応答します。FCID がネームサーバから戻された場合は、iSCSI セッションが許可されます。これ以外の場合、ログイン要求は拒否されます。

設定

このセクションでは、MDS 9216 と Linux 用 Cisco iSCSI ドライバを設定するために必要な情報を提供しています。

注：このドキュメントで使用されているコマンドの詳細を調べるには、『Cisco MDS 9000ファミリコマンドリファレンス』および『Cisco MDS 9000ファミリソフトウェアコンフィギュレーションガイド』を使用してください。

ネットワーク図

このドキュメントでは、次の図に示すネットワーク設定を使用します。

設定

このドキュメントで使用する設定を次に示します。

Ape（HP 9000/800 A500 HP-UX 11.00）
Vatican（MDS 9216）

Ape（HP 9000/800 A500 HP-UX 11.00）
On the HP-UX host only the file /etc/iscsi.conf has to be modified: [/]# cat /etc/iscsi.conf # iSCSI configuration file - see iscsi.conf(4) # DiscoveryAddress Settings # ------------------------- # Add "DiscoveryAddress=xxx" entries for each iSCSI router instance. # The driver attempts to discover iSCSI targets at that address # and make as many targets as possible available for use. # 'xxx' can be an IP address or a hostname. A TCP port number can be # specified by appending a colon and the port number to the address. # All entries have to start in column one and must not contain any # whitespace. # # Example: # # DiscoveryAddress=scsirouter1 DiscoveryAddress=10.48.69.242 !--- Configure the IP address of the GE interface that acceps iSCSI request from your host. # The DiscoveryAddress Settings can take following entry. # # 1) Authentication Settings # 2) ConnectionTimeout Settings !--- Other required driver parameters could be changed in the iscsi.conf file. ...... [/]# cat /etc/iscsi.bindings # iSCSI bindings, file format version 1.0. # NOTE: this file is automatically maintained by the iSCSI daemon. # You do not need to edit this file under most circumstances. # If iSCSI targets in this file have been permanently deleted, you # may wish to delete the bindings for the deleted targets. # # Format: # bus target iSCSI # id id TargetName # [...] 0 10 seagate 0 11 spa-vt !--- The iSCSI driver discovery daemon process looks up each discovered !--- target in the /etc/iscsi.bindings file. If an entry exists in the file for the target, !--- the corresponding SCSI target ID is assigned to the target. If no entry !--- exists for the target, the smallest available SCSI target ID is assigned !--- and an entry is written to the /etc/iscsi.bindings file for this target. !--- Note that the /etc/iscsi.bindings file permanently contains entries !--- for all iSCSI targets ever logged into from this host. If a target is !--- no longer available to a host, you can manually edit the file and remove !--- entries so that the obsolete target no longer consumes a SCSI target ID. !--- If you know the iSCSI target name of a target in advance, and you want !--- it to be assigned a particular SCSI target ID, you can add an entry !--- manually. You must stop the iSCSI driver before editing the !--- /etc/iscsi.bindings file. The maximum number of targets is 14. !--- Enter [/]#/sbin/init.d/iscsi* start to manually start the iSCSI driver.* !--- Enter [/]#/sbin/init.d/iscsi* stop to manually stop the iSCSI driver.*

Ape（HP 9000/800 A500 HP-UX 11.00）

On the HP-UX host only the file /etc/iscsi.conf has to be modified:

[/]# cat /etc/iscsi.conf
# iSCSI configuration file - see iscsi.conf(4)
# DiscoveryAddress Settings
# -------------------------
# Add "DiscoveryAddress=xxx" entries for each iSCSI router instance.
# The driver attempts to discover iSCSI targets at that address
# and make as many targets as possible available for use.
# 'xxx' can be an IP address or a hostname. A TCP port number can be
# specified by appending a colon and the port number to the address.
# All entries have to start in column one and must not contain any
# whitespace.
#
# Example:
#
# DiscoveryAddress=scsirouter1
DiscoveryAddress=10.48.69.242

!--- Configure the IP address of the GE interface that acceps iSCSI request from your host.

# The DiscoveryAddress Settings can take following entry.
#
# 1) Authentication Settings
# 2) ConnectionTimeout Settings

!--- Other required driver parameters could be changed in the iscsi.conf file.

......

[/]# cat /etc/iscsi.bindings
# iSCSI bindings, file format version 1.0.
# NOTE: this file is automatically maintained by the iSCSI daemon.
# You do not need to edit this file under most circumstances.
# If iSCSI targets in this file have been permanently deleted, you
# may wish to delete the bindings for the deleted targets.
#
# Format:
# bus target iSCSI
# id id TargetName
#
[...]
0 10 seagate
0 11 spa-vt

!--- The iSCSI driver discovery daemon process looks up each discovered !--- target in the /etc/iscsi.bindings file. If an entry exists in the file for the target, !--- the corresponding SCSI target ID is assigned to the target. If no entry !--- exists for the target, the smallest available SCSI target ID is assigned !--- and an entry is written to the /etc/iscsi.bindings file for this target.

!--- Note that the /etc/iscsi.bindings file permanently contains entries !--- for all iSCSI targets ever logged into from this host. If a target is !--- no longer available to a host, you can manually edit the file and remove !--- entries so that the obsolete target no longer consumes a SCSI target ID. !--- If you know the iSCSI target name of a target in advance, and you want !--- it to be assigned a particular SCSI target ID, you can add an entry !--- manually. You must stop the iSCSI driver before editing the !--- /etc/iscsi.bindings file. The maximum number of targets is 14.

!--- Enter [/]#/sbin/init.d/iscsi start to manually start the iSCSI driver.

!--- Enter [/]#/sbin/init.d/iscsi stop to manually stop the iSCSI driver.

Vatican（Cisco MDS 9216）
!--- If you are starting from the factory default configuration, you !--- need to setup the IP address and mask of the management interface. !--- This would normally be done during the initial setup . interface mgmt0 ip address 10.48.69.156 255.255.255.192 !--- In this configuration example, all the iSCSI targets are in a single vsan . vsan database vsan 1016 vsan 1016 interface fc1/3 vsan 1016 interface fc1/7 !--- These are the boot variables. boot system bootflash:/s111a boot kickstart bootflash:/k111a # Simple IP configuration ip domain-name cisco.com ip name-server 144.254.10.123 ip default-gateway 10.48.69.129 !--- Declare that the iSCSI initiator with the IP address of the host. # It belongs to the vsan of our choice iscsi authentication none iscsi initiator ip-address 10.48.69.238 vsan 1016 !--- Define the first virtual target, it is a JBOD. Identify the target !--- by its pWWN, advertise it on a GE interface, and allow access to the initiator. iscsi virtual-target name seagate pWWN 21:00:00:20:37:67:f7:a2 advertise interface GigabitEthernet2/1 initiator ip address 10.48.69.238 permit !--- The second target is a Clariion disk array. Since the maximum LUN number that you !--- can have under HP-UX without additional software is 7, define a mapping from FC LUN numbers !--- to the iSCSI LUN numbers you are going to present to the host. iscsi virtual-target name spa-vt pWWN 50:06:01:60:88:02:a8:2b fc-lun 0020 iscsi-lun 0003 pWWN 50:06:01:60:88:02:a8:2b fc-lun 0021 iscsi-lun 0004 advertise interface GigabitEthernet2/1 initiator ip address 10.48.69.238 permit !--- Permit access to the targets on the FC level. Create a simple zone configuration to do this. !--- Alternatively, you could have simply set the default zoning policy in vsan 1016 to permit. zone name jbod vsan 1016 member pwwn 21:00:00:20:37:67:f7:a2 member symbolic-nodename 10.48.69.238 zone name spa vsan 1016 member pwwn 50:06:01:60:88:02:a8:2b member symbolic-nodename 10.48.69.238 zoneset name iscsidoc vsan 1016 member jbod member spa zoneset activate name iscsidoc vsan 1016 !--- Set the IP address and mask of the GE interface and enable it. interface GigabitEthernet2/1 ip address 10.48.69.242 255.255.255.192 iscsi authentication none no shutdown # Lastly we bring up the iSCSI interface up interface iscsi2/1 no shutdown

Vatican（Cisco MDS 9216）

!--- If you are starting from the factory default configuration, you !--- need to setup the IP address and mask of the management interface. !--- This would normally be done during the initial setup
.

interface mgmt0
ip address 10.48.69.156 255.255.255.192

!--- In this configuration example, all the iSCSI targets are in a single vsan
.

vsan database
vsan 1016
vsan 1016 interface fc1/3
vsan 1016 interface fc1/7

!--- These are the boot variables.

boot system bootflash:/s111a
boot kickstart bootflash:/k111a

# Simple IP configuration
ip domain-name cisco.com
ip name-server 144.254.10.123
ip default-gateway 10.48.69.129

!--- Declare that the iSCSI initiator with the IP address of the host.

# It belongs to the vsan of our choice
iscsi authentication none
iscsi initiator ip-address 10.48.69.238
vsan 1016

!--- Define the first virtual target, it is a JBOD. Identify the target !--- by its pWWN, advertise it on a GE interface, and allow access to the initiator.

iscsi virtual-target name seagate
pWWN 21:00:00:20:37:67:f7:a2
advertise interface GigabitEthernet2/1
initiator ip address 10.48.69.238 permit

!--- The second target is a Clariion disk array. Since the maximum LUN number that you !--- can have under HP-UX without additional software is 7, define a mapping from FC LUN numbers !--- to the iSCSI LUN numbers you are going to present to the host.

iscsi virtual-target name spa-vt
pWWN 50:06:01:60:88:02:a8:2b fc-lun 0020 iscsi-lun 0003
pWWN 50:06:01:60:88:02:a8:2b fc-lun 0021 iscsi-lun 0004
advertise interface GigabitEthernet2/1
initiator ip address 10.48.69.238 permit

!--- Permit access to the targets on the FC level. Create a simple zone configuration to do this. !--- Alternatively, you could have simply set the default zoning policy in vsan 1016 to permit.

zone name jbod vsan 1016
member pwwn 21:00:00:20:37:67:f7:a2
member symbolic-nodename 10.48.69.238

zone name spa vsan 1016
member pwwn 50:06:01:60:88:02:a8:2b
member symbolic-nodename 10.48.69.238

zoneset name iscsidoc vsan 1016
member jbod
member spa

zoneset activate name iscsidoc vsan 1016

!--- Set the IP address and mask of the GE interface and enable it.

interface GigabitEthernet2/1
ip address 10.48.69.242 255.255.255.192
iscsi authentication none
no shutdown
# Lastly we bring up the iSCSI interface up
interface iscsi2/1
no shutdown

確認

ここでは、設定が正しく動作することを確認する方法と、問題が発生したときのトラブルシューティング方法について説明しています。

特定の show コマンドが、コマンドルックアップツール（登録ユーザ専用）でサポートされています。このツールを使用すると、show コマンドの出力を分析できます

HP-UX ホストのコマンド

netstat-n または lsof：TCP 接続を確認します。
iscsi-ls：現在使用可能なデバイスを表示します。
dmesg：診断メッセージを収集します。

MDS/IPS-8 のコマンド

show zone：ゾーン情報を表示します。
show flogi database：FLOGI サーバ情報を表示します。
show fcns database：特定の VSAN のネームサーバ情報を表示します。
show vsan membership：異なる VSAN のインターフェイス情報を表示します。
show iscsi：さまざまな iSCSI 情報を表示します。
show ips：IP サービスに関するさまざまな情報を表示します。
show scsi-target：特定の VSAN の SCSI デバイスを表示します（FC-LUN を iSCSI-LUN にマッピングするため）。
show interface：さまざまなインターフェイスに関する情報を表示します。
show ip route：IP ルートの情報を表示します。

トラブルシュート

ここでは、設定のトラブルシューティングに使用できる情報を示します。

この設定に関連するトラブルシューティング情報を次に挙げます。

Ape からの表示（HP 9000/800 A500 HP-UX 11.00）
Vatican からの表示（MDS 9216）
Fabric Manager および Device Manager の表示

Ape（HP 9000/800 A500 HP-UX 11.00）
# /sbin/init.d/iscsi stop Waiting for iscsid to terminate ..... Waiting for iscsid to terminate ..... Waiting for iscsid to terminate ..... Waiting for iscsid to terminate ..... Waiting for iscsi_[tr]x_threads to terminate ..... [/]# /sbin/init.d/iscsi start Number of indices in scsi_isc table used by System: 5 Index used by iSCSI controller: 255 Number of free indices: 251 [/]# netstat -n \| grep '10.48.69.242' tcp 0 0 10.48.69.238.49501 10.48.69.242.3260 ESTABLISHED tcp 0 0 10.48.69.238.49500 10.48.69.242.3260 ESTABLISHED tcp 0 0 10.48.69.238.49499 10.48.69.242.3260 ESTABLISHED !--- If you have lsof, you can also try the following: [/]# lsof -i @10.48.69.242 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME iscsid 2836 root 1u inet 0x41aa9268 0t1300 TCP ape.cisco.com:49499->10.48.69.242:3260 (ESTABLISHED) !--- Note that ioscan does not report iSCSI devices. To see the list !--- of available iSCSI devices from the host, issue the iscsi-ls command. [/]# iscsi-ls -l ############################################################# TARGET NAME = seagate TARGET ID = 10 ADDRESS = 10.48.69.242:3260,128 STATUS = CONNECTED 10.48.69.238:49501 <-> 10.48.69.242:3260 9/19/2003 15:40:42 SESSION = ISID 00023d000001 TSID 80 LUN 0 = DISK c255t10d0 'SEAGATE ST318203FC 0004' BLOCKS : 35566479 BLOCKSIZE : 512 CAPACITY : 17366.00MB ############################################################# TARGET NAME = spa-vt TARGET ID = 11 ADDRESS = 10.48.69.242:3260,128 STATUS = CONNECTED 10.48.69.238:49500 <-> 10.48.69.242:3260 9/19/2003 15:40:42 SESSION = ISID 00023d000001 TSID 80 LUN 4 = DISK c255t11d4 'DGC RAID 1 0632' BLOCKS : 6291419 BLOCKSIZE : 512 CAPACITY : 3071.00MB LUN 3 = DISK c255t11d3 'DGC RAID 1 0632' BLOCKS : 10485607 BLOCKSIZE : 512 CAPACITY : 5119.00MB !--- To see detailed statistics for currently established iSCSI sessions, use this: [/]# iscsi-ls -c ############################################################# TARGET NAME = seagate TARGET ID = 10 ADDRESS = 10.48.69.242:3260,128 STATUS = CONNECTED 10.48.69.238:49501 <-> 10.48.69.242:3260 9/19/2003 15:40:42 SESSION = ISID 00023d000001 TSID 80 InitialR2T = Yes FirstBurstLength = 262144 Bytes MaxBurstLength = 16776192 Bytes Header Digest = 1 Data Digest = 1 Login Timeout = 15 Seconds Auth Timeout = 45 Seconds Active Timeout = 5 Seconds Idle Timeout = 60 Seconds Ping Timeout = 5 Seconds ############################################################# TARGET NAME = spa-vt TARGET ID = 11 ADDRESS = 10.48.69.242:3260,128 STATUS = CONNECTED 10.48.69.238:49500 <-> 10.48.69.242:3260 9/19/2003 15:40:42 SESSION = ISID 00023d000001 TSID 80 InitialR2T = Yes FirstBurstLength = 262144 Bytes MaxBurstLength = 16776192 Bytes Header Digest = 1 Data Digest = 1 Login Timeout = 15 Seconds Auth Timeout = 45 Seconds Active Timeout = 5 Seconds Idle Timeout = 60 Seconds Ping Timeout = 5 Seconds !--- Here are some of the entries you can expect to find in the syslog: [/]# dmesg [...] iSCSI: session 0x4179b000 target 11 accepted the preferred value (None) DataDigest=CRC32C iSCSI: session 0x41a64800 target 10 accepted the preferred value (None) DataDigest=CRC32C iSCSI: Direct Access Device found at lun 3 on target 11 Vendor Id : DGC Product Id : RAID 1 Product Rev: 0632 iSCSI: Direct Access Device found at lun 0 on target 10 Vendor Id : SEAGATE Product Id : ST318203FC Product Rev: 0004 iSCSI: Direct Access Device found at lun 4 on target 11 Vendor Id : DGC Product Id : RAID 1 Product Rev: 0632 iSCSI: iscsi_recv_cmd: session (0x4179b000) recv_cmd(sc) (0x41844800), Cmd 0x25, status 0x2, senselen 18, sense key 06, ASC/ASCQ 29/00, task (0x40718b00) to (host 255 target 11 lun 3), TargetAlias spa-vt Sense 70000600 0000000a 00000000 29000000 0000 READ_CAPACITY result = 0x2 Target = 0xb LUN = 0x3 iSCSI: iscsi_recv_cmd: task (0x40718b00) itt 9 to (host 255 target 11 lun 3), Cmd 0x25, U(Overflow/Underflow) underflow, received 0(task->rxdata), residual 8, expected 8 iSCSI: iscsi_recv_cmd: session (0x4179b000) recv_cmd(sc) (0x41844800), Cmd 0x25, status 0x2, senselen 18, sense key 06, ASC/ASCQ 29/00, task (0x40718c00) to (host 255 target 11 lun 4), TargetAlias spa-vt Sense 70000600 0000000a 00000000 29000000 0000 READ_CAPACITY result = 0x2 Target = 0xb LUN = 0x4 iSCSI: iscsi_recv_cmd: task (0x40718c00) itt 11 to (host 255 target 11 lun 4), Cmd 0x25, U(Overflow/Underflow) underflow, received 0(task->rxdata), residual 8, expected 8

Ape（HP 9000/800 A500 HP-UX 11.00）

# /sbin/init.d/iscsi stop
 Waiting for iscsid to terminate .....
 Waiting for iscsid to terminate .....
 Waiting for iscsid to terminate .....
 Waiting for iscsid to terminate .....
 Waiting for iscsi_[tr]x_threads to terminate .....
  
 [/]# /sbin/init.d/iscsi start
 Number of indices in scsi_isc table used by System: 5
 Index used by iSCSI controller: 255
 Number of free indices: 251
 [/]# netstat -n | grep '10.48.69.242'

 tcp        0      0  10.48.69.238.49501     10.48.69.242.3260       ESTABLISHED
 tcp        0      0  10.48.69.238.49500     10.48.69.242.3260       ESTABLISHED
 tcp        0      0  10.48.69.238.49499     10.48.69.242.3260       ESTABLISHED
 
!--- If you have lsof, you can also try the following:

 [/]# lsof -i @10.48.69.242
 COMMAND  PID USER   FD   TYPE     DEVICE SIZE/OFF NODE NAME
 iscsid  2836 root    1u  inet 0x41aa9268   0t1300  TCP ape.cisco.com:49499->10.48.69.242:3260 (ESTABLISHED)

!--- Note that ioscan does not report iSCSI devices. To see the list 
!--- of available iSCSI devices from the host, issue the iscsi-ls command.

 [/]# iscsi-ls -l
  #############################################################

  TARGET NAME      = seagate
  TARGET ID        = 10
  ADDRESS          = 10.48.69.242:3260,128
  STATUS           = CONNECTED 10.48.69.238:49501 <-> 10.48.69.242:3260
                     9/19/2003 15:40:42
  SESSION          = ISID 00023d000001 TSID 80

  LUN     0        = DISK  c255t10d0  'SEAGATE  ST318203FC      0004' 
                     BLOCKS : 35566479  BLOCKSIZE : 512 CAPACITY : 17366.00MB

  #############################################################

  TARGET NAME      = spa-vt
  TARGET ID        = 11
  ADDRESS          = 10.48.69.242:3260,128
  STATUS           = CONNECTED 10.48.69.238:49500 <-> 10.48.69.242:3260
                     9/19/2003 15:40:42
  SESSION          = ISID 00023d000001 TSID 80

  LUN     4        = DISK  c255t11d4  'DGC      RAID 1          0632' 
                     BLOCKS : 6291419  BLOCKSIZE : 512 CAPACITY : 3071.00MB

  LUN     3        = DISK  c255t11d3  'DGC      RAID 1          0632' 
                     BLOCKS : 10485607  BLOCKSIZE : 512 CAPACITY : 5119.00MB

 !--- To see detailed statistics for currently established iSCSI sessions, use this:

 [/]# iscsi-ls -c
  #############################################################
  TARGET NAME      = seagate
  TARGET ID        = 10
  ADDRESS          = 10.48.69.242:3260,128
  STATUS           = CONNECTED 10.48.69.238:49501 <-> 10.48.69.242:3260
                     9/19/2003 15:40:42
  SESSION          = ISID 00023d000001 TSID 80
  InitialR2T       = Yes
  FirstBurstLength = 262144 Bytes
  MaxBurstLength   = 16776192 Bytes
  Header Digest    = 1
  Data Digest      = 1
  Login Timeout    = 15 Seconds
  Auth Timeout     = 45 Seconds
  Active Timeout   = 5 Seconds
  Idle Timeout     = 60 Seconds
  Ping Timeout     = 5 Seconds
  #############################################################
  TARGET NAME      = spa-vt
  TARGET ID        = 11
  ADDRESS          = 10.48.69.242:3260,128
  STATUS           = CONNECTED 10.48.69.238:49500 <-> 10.48.69.242:3260
                     9/19/2003 15:40:42
  SESSION          = ISID 00023d000001 TSID 80
  InitialR2T       = Yes
  FirstBurstLength = 262144 Bytes
  MaxBurstLength   = 16776192 Bytes
  Header Digest    = 1
  Data Digest      = 1
  Login Timeout    = 15 Seconds
  Auth Timeout     = 45 Seconds
  Active Timeout   = 5 Seconds
  Idle Timeout     = 60 Seconds
  Ping Timeout     = 5 Seconds
 

!--- Here are some of the entries you can expect to find in the syslog:


 [/]# dmesg
 [...]
 iSCSI: session 0x4179b000 target 11 accepted the preferred value (None) DataDigest=CRC32C
 iSCSI: session 0x41a64800 target 10 accepted the preferred value (None) DataDigest=CRC32C
 iSCSI: Direct Access Device found at lun 3 on target 11
         Vendor Id  : DGC      
         Product Id : RAID 1                     Product Rev: 0632 
 iSCSI: Direct Access Device found at lun 0 on target 10
         Vendor Id  : SEAGATE  
         Product Id : ST318203FC                 Product Rev: 0004 
 iSCSI: Direct Access Device found at lun 4 on target 11
         Vendor Id  : DGC      
         Product Id : RAID 1                     Product Rev: 0632 
 iSCSI: iscsi_recv_cmd: session (0x4179b000) recv_cmd(sc) (0x41844800), Cmd 0x25, status 0x2,
           senselen 18, sense key 06, ASC/ASCQ 29/00, task (0x40718b00) to (host 255 target 11 lun 3),
           TargetAlias spa-vt
        Sense 70000600 0000000a 00000000 29000000 0000

 READ_CAPACITY result = 0x2 Target = 0xb LUN = 0x3
 iSCSI: iscsi_recv_cmd: task (0x40718b00) itt 9 to (host 255 target 11 lun 3), Cmd 0x25, 
          U(Overflow/Underflow) underflow, received 0(task->rxdata), residual 8, expected 8
 iSCSI: iscsi_recv_cmd: session (0x4179b000) recv_cmd(sc) (0x41844800), Cmd 0x25, status 0x2, senselen 18,
          sense key 06, ASC/ASCQ 29/00, task (0x40718c00) to (host 255 target 11 lun 4), TargetAlias spa-vt
        Sense 70000600 0000000a 00000000 29000000 0000

 READ_CAPACITY result = 0x2 Target = 0xb LUN = 0x4
 iSCSI: iscsi_recv_cmd: task (0x40718c00) itt 11 to (host 255 target 11 lun 4), Cmd 0x25, 
           U(Overflow/Underflow) underflow, received 0(task->rxdata), residual 8, expected 8

Vatican からの表示（MDS 9216）
vatican# show zone status vsan 1016 VSAN: 1016 default-zone: deny distribute: active only Interop: Off Full Zoning Database : Zonesets:1 Zones:3 Aliases: 0 Active Zoning Database : Name: iscsidoc Zonesets:1 Zones:3 Status: Activation completed at Wed Sep 17 13:03:56 2003 vatican# show zone active vsan 1016 zone name jbod vsan 1016 * fcid 0x7902e8 [pwwn 21:00:00:20:37:67:f7:a2] * fcid 0x790100 [symbolic-nodename 10.48.69.238] zone name spa vsan 1016 * fcid 0x790104 [pwwn 50:06:01:60:88:02:a8:2b] * fcid 0x790100 [symbolic-nodename 10.48.69.238] zone name spb vsan 1016 * fcid 0x790105 [pwwn 50:06:01:68:88:02:a8:2b] * fcid 0x790100 [symbolic-nodename 10.48.69.238] vatican# show flogi database vsan 1016 --------------------------------------------------------------------------- INTERFACE VSAN FCID PORT NAME NODE NAME --------------------------------------------------------------------------- fc1/3 1016 0x7902e8 21:00:00:20:37:67:f7:a2 20:00:00:20:37:67:f7:a2 fc1/7 1016 0x790104 50:06:01:60:88:02:a8:2b 50:06:01:60:11:02:a8:2b fc1/11 1016 0x790105 50:06:01:68:88:02:a8:2b 50:06:01:60:11:02:a8:2b iscsi2/1 1016 0x790100 20:03:00:0c:30:57:5e:c2 20:02:00:0c:30:57:5e:c2 Total number of flogi = 4. vatican# show fcns database vsan 1016 VSAN 1016: -------------------------------------------------------------------------- FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE -------------------------------------------------------------------------- 0x790100 N 20:03:00:0c:30:57:5e:c2 (Cisco) scsi-fcp:init isc..w 0x790104 N 50:06:01:60:88:02:a8:2b (Clariion) scsi-fcp:target 0x790105 N 50:06:01:68:88:02:a8:2b (Clariion) scsi-fcp:target 0x7902e8 NL 21:00:00:20:37:67:f7:a2 (Seagate) scsi-fcp:target Total number of entries = 4 --- FCID 0X790100 is the virtual N port(HBA) for the iSCSI host. vatican# show fcns database detail vsan 1016 ------------------------ VSAN:1016 FCID:0x790100 ------------------------ port-wwn (vendor) :20:03:00:0c:30:57:5e:c2 (Cisco) node-wwn :20:02:00:0c:30:57:5e:c2 class :2,3 node-ip-addr :10.48.69.238 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:init iscsi-gw symbolic-port-name : symbolic-node-name :10.48.69.238 port-type :N port-ip-addr :0.0.0.0 fabric-port-wwn :20:41:00:0c:30:57:5e:c0 hard-addr :0x000000 ------------------------ VSAN:1016 FCID:0x790104 ------------------------ port-wwn (vendor) :50:06:01:60:88:02:a8:2b (Clariion) node-wwn :50:06:01:60:11:02:a8:2b class :3 node-ip-addr :0.0.0.0 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:target symbolic-port-name : symbolic-node-name : port-type :N port-ip-addr :0.0.0.0 fabric-port-wwn :20:07:00:0c:30:57:5e:c0 hard-addr :0x000000 ------------------------ VSAN:1016 FCID:0x790105 ------------------------ port-wwn (vendor) :50:06:01:68:88:02:a8:2b (Clariion) node-wwn :50:06:01:60:11:02:a8:2b class :3 node-ip-addr :0.0.0.0 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:target symbolic-port-name : symbolic-node-name : port-type :N port-ip-addr :0.0.0.0 fabric-port-wwn :20:0b:00:0c:30:57:5e:c0 hard-addr :0x000000 ------------------------ VSAN:1016 FCID:0x7902e8 ------------------------ port-wwn (vendor) :21:00:00:20:37:67:f7:a2 (Seagate) node-wwn :20:00:00:20:37:67:f7:a2 class :3 node-ip-addr :0.0.0.0 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:target symbolic-port-name : symbolic-node-name : port-type :NL port-ip-addr :0.0.0.0 fabric-port-wwn :20:03:00:0c:30:57:5e:c0 hard-addr :0x000000 Total number of entries = 4 vatican# show iscsi initiator iSCSI Node name is 10.48.69.238 iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e iSCSI alias name: ape Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) Member of vsans: 1016 Number of Virtual n_ports: 1 Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic) Interface iSCSI 2/1, Portal group tag: 0x80 VSAN ID 1016, FCID 0x790100 vatican# show iscsi initiator configured iSCSI Node name is 10.48.69.238 Member of vsans: 1016 vatican# show iscsi initiator detail iSCSI Node name is 10.48.69.238 iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e iSCSI alias name: ape Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) Member of vsans: 1016 Number of Virtual n_ports: 1 Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic) Interface iSCSI 2/1, Portal group tag is 0x80 VSAN ID 1016, FCID 0x790100 2 FC sessions, 2 iSCSI sessions iSCSI session details Target: spa-vt Statistics: PDU: Command: 10, Response: 10 Bytes: TX: 416, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.242:3260, Remote 10.48.69.238:49500 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 62 ms, Variance: 3 Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3 Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4 Congestion window: Current: 4 KB Target: seagate Statistics: PDU: Command: 4, Response: 4 Bytes: TX: 304, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.242:3260, Remote 10.48.69.238:49501 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 62 ms, Variance: 3 Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3 Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4 Congestion window: Current: 4 KB FCP Session details Target FCID: 0x790104 (S_ID of this session: 0x790100) pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b Session state: LOGGED_IN 1 iSCSI sessions share this FC session Target: spa-vt Negotiated parameters RcvDataFieldSize 1024 our_RcvDataFieldSize 1392 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 10 Target FCID: 0x7902e8 (S_ID of this session: 0x790100) pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2 Session state: LOGGED_IN 1 iSCSI sessions share this FC session Target: seagate Negotiated parameters RcvDataFieldSize 1392 our_RcvDataFieldSize 1392 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 4 vatican# show iscsi initiator iscsi-session detail iSCSI Node name is 10.48.69.238 iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e iSCSI alias name: ape Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) Member of vsans: 1016 Number of Virtual n_ports: 1 Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic) Interface iSCSI 2/1, Portal group tag is 0x80 VSAN ID 1016, FCID 0x790100 2 FC sessions, 2 iSCSI sessions iSCSI session details Target: spa-vt Statistics: PDU: Command: 10, Response: 10 Bytes: TX: 416, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.242:3260, Remote 10.48.69.238:49500 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 62 ms, Variance: 2 Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3 Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4 Congestion window: Current: 4 KB Target: seagate Statistics: PDU: Command: 4, Response: 4 Bytes: TX: 304, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.242:3260, Remote 10.48.69.238:49501 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 62 ms, Variance: 2 Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3 Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4 Congestion window: Current: 4 KB vatican# show iscsi initiator fcp-session detail iSCSI Node name is 10.48.69.238 iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e iSCSI alias name: ape Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) Member of vsans: 1016 Number of Virtual n_ports: 1 Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic) Interface iSCSI 2/1, Portal group tag is 0x80 VSAN ID 1016, FCID 0x790100 2 FC sessions, 2 iSCSI sessions FCP Session details Target FCID: 0x790104 (S_ID of this session: 0x790100) pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b Session state: LOGGED_IN 1 iSCSI sessions share this FC session Target: spa-vt Negotiated parameters RcvDataFieldSize 1024 our_RcvDataFieldSize 1392 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 10 Target FCID: 0x7902e8 (S_ID of this session: 0x790100) pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2 Session state: LOGGED_IN 1 iSCSI sessions share this FC session Target: seagate Negotiated parameters RcvDataFieldSize 1392 our_RcvDataFieldSize 1392 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 4 vatican# show iscsi virtual-target configured target: seagate * Port WWN 21:00:00:20:37:67:f7:a2 === The "" means you have both discovery and target session. If there is no "" in front of the pWWN, it means you only have discovery session. Configured node No. of LU mapping: 1 iSCSI LUN: 0000, FC LUN: 0000 No. of advertised interface: 1 GigabitEthernet 2/1 No. of initiators permitted: 1 initiator 10.48.69.238/32 is permitted all initiator permit is disabled target: spa-vt * Port WWN 50:06:01:60:88:02:a8:2b Secondary PWWN 50:06:01:68:88:02:a8:2b Configured node No. of LU mapping: 2 iSCSI LUN: 0003, FC LUN: 0020 iSCSI LUN: 0004, FC LUN: 0021 No. of advertised interface: 1 GigabitEthernet 2/1 No. of initiators permitted: 1 initiator 10.48.69.238/32 is permitted all initiator permit is disabled vatican# show iscsi stats iscsi 2/1 iscsi2/1 5 minutes input rate 16 bits/sec, 2 bytes/sec, 0 frames/sec 5 minutes output rate 16 bits/sec, 2 bytes/sec, 0 frames/sec iSCSI statistics 50932 packets input, 60370640 bytes Command 3659 pdus, Data-out 41069 pdus, 56533832 bytes, 2476 fragments output 115926 packets, 112863536 bytes Response 3374 pdus (with sense 206), R2T 1897 pdus Data-in 103999 pdus, 106404584 bytes vatican# show ips arp interface gigabitethernet 2/1 Protocol Address Age (min) Hardware Addr Type Interface Internet 10.48.69.200 0 0008.e21e.c7bc ARPA GigabitEthernet2/1 Internet 10.48.69.201 5 0202.3d30.45c9 ARPA GigabitEthernet2/1 Internet 10.48.69.206 5 0202.3d30.45ce ARPA GigabitEthernet2/1 Internet 10.48.69.209 3 0202.3d30.45d1 ARPA GigabitEthernet2/1 Internet 10.48.69.226 2 0060.08f6.bc1a ARPA GigabitEthernet2/1 Internet 10.48.69.229 4 0800.209e.edab ARPA GigabitEthernet2/1 Internet 10.48.69.231 1 0002.b3c1.7dab ARPA GigabitEthernet2/1 Internet 10.48.69.233 0 0010.4200.7d5b ARPA GigabitEthernet2/1 Internet 10.48.69.238 0 0030.6e1b.6f51 ARPA GigabitEthernet2/1 Internet 10.48.69.239 10 0030.6e1c.a00b ARPA GigabitEthernet2/1 Internet 10.48.69.241 0 000b.cdaf.b4c3 ARPA GigabitEthernet2/1 Internet 10.48.69.248 4 0202.3d30.45f8 ARPA GigabitEthernet2/1 Internet 10.48.69.252 1 0202.3d30.45fc ARPA GigabitEthernet2/1 Internet 10.10.2.28 7 0202.3d0a.021c ARPA GigabitEthernet2/1 vatican# show ips stats tcp interface gigabitethernet 2/1 detail TCP Statistics for port GigabitEthernet2/1 TCP send stats 261205 segments, 117757220 bytes 140632 data, 51907 ack only packets 2655 control (SYN/FIN/RST), 0 probes, 2639 window updates 63382 segments retransmitted, 90885612 bytes 63382 retransmitted while on ethernet send queue, 1 packets split 13327 delayed acks sent TCP receive stats 249073 segments, 72669 data packets in sequence, 61525764 bytes in sequence 2335 predicted ack, 68605 predicted data 0 bad checksum, 0 multi/broadcast, 0 bad offset 0 no memory drops, 0 short segments 4396 duplicate bytes, 205 duplicate packets 0 partial duplicate bytes, 0 partial duplicate packets 0 out-of-order bytes, 2625 out-of-order packets 0 packet after window, 0 bytes after window 0 packets after close 80504 acks, 117762158 ack bytes, 0 ack toomuch, 96274 duplicate acks 0 ack packets left of snd_una, 7 non-4 byte aligned packets 54199 window updates, 0 window probe 6343 pcb hash miss, 709 no port, 6 bad SYN, 0 paws drops TCP Connection Stats 0 attempts, 2718 accepts, 2718 established 2716 closed, 15 drops, 0 conn drops 3 drop in retransmit timeout, 10 drop in keepalive timeout 0 drop in persist drops, 0 connections drained TCP Miscellaneous Stats 37062 segments timed, 41787 rtt updated 817 retransmit timeout, 1 persist timeout 22654 keepalive timeout, 22643 keepalive probes TCP SACK Stats 0 recovery episodes, 0 data packets, 0 data bytes 0 data packets retransmitted, 0 data bytes retransmitted 0 connections closed, 0 retransmit timeouts TCP SYN Cache Stats 2720 entries, 2718 connections completed, 0 entries timed out 0 dropped due to overflow, 2 dropped due to RST 0 dropped due to ICMP unreach, 0 dropped due to bucket overflow 0 abort due to no memory, 2 duplicate SYN, 183 no-route SYN drop 0 hash collisions, 0 retransmitted TCP Active Connections Local Address Remote Address State Send-Q Recv-Q 10.48.69.242:3260 10.48.69.238:49499 ESTABLISH 0 0 10.48.69.242:3260 10.48.69.238:49500 ESTABLISH 0 0 10.48.69.242:3260 10.48.69.238:49501 ESTABLISH 0 0 0.0.0.0:3260 0.0.0.0:0 LISTEN 0 0 vatican# discover scsi-target local discovery started vatican# show scsi-target devices vsan 1016 -------------------------------------------------------------------------------- VSAN FCID PWWN VENDOR MODEL REV -------------------------------------------------------------------------------- 1016 0x790104 50:06:01:60:88:02:a8:2b DGC RAID 0 0632 1016 0x7902e8 21:00:00:20:37:67:f7:a2 SEAGATE ST318203FC 0004 vatican# show scsi-target lun vsan 1016 - RAID from DGC (Rev 0632) FCID is 0x790104 in VSAN 1016, PWWN is 50:06:01:60:88:02:a8:2b ------------------------------------------------------------------------------ LUN Capacity Status Serial Number Device-Id (MB) ------------------------------------------------------------------------------ 0x0 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b da:05:b6:a9:b6:9d:7b:00 C:1 A:0 T:0 00:00:00:00 0x1 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 6a:66:0d:74:cb:33:88:6c C:1 A:0 T:0 00:01:00:00 0x2 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ec:81:5b:a2:c4:43:0d:8a C:1 A:0 T:0 00:02:00:00 0x3 2147 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b e0:47:b3:be:3b:00:e0:d5 C:1 A:0 T:0 00:03:00:00 0x4 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 00:51:5b:7f:3d:9a:7b:ce C:1 A:0 T:0 00:04:00:00 0x5 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ab:b1:ae:80:59:c0:fc:f0 C:1 A:0 T:0 00:05:00:00 0x6 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ad:91:58:af:d2:fd:c7:47 C:1 A:0 T:0 00:06:00:00 0x7 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b b1:ef:e7:6c:44:5c:16:97 C:1 A:0 T:0 00:07:00:00 0x8 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 84:4f:09:60:30:1e:fc:50 C:1 A:0 T:0 00:08:00:00 0x9 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b aa:6d:e2:0e:ce:7a:cc:21 C:1 A:0 T:0 00:09:00:00 0xa 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 5b:66:67:89:6c:f2:d1:56 C:1 A:0 T:0 00:0a:00:00 0xb 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b a9:32:bd:04:4a:bb:3d:9b C:1 A:0 T:0 00:0b:00:00 0xc 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b cd:d9:96:f7:57:3f:07:0c C:1 A:0 T:0 00:0c:00:00 0xd 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 0c:e5:ba:39:68:ca:d6:f0 C:1 A:0 T:0 00:0d:00:00 0xe 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 60:6e:ee:76:98:fc:ab:97 C:1 A:0 T:0 00:0e:00:00 0xf 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 8b:58:80:7b:12:fb:6b:12 C:1 A:0 T:0 00:0f:00:00 0x10 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b a1:2f:6d:b0:c3:d6:c2:46 C:1 A:0 T:0 00:10:00:00 0x11 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 2c:48:c4:74:25:4b:26:dd C:1 A:0 T:0 00:11:00:00 0x20 5369 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ba:18:6a:40:22:40:94:75 C:1 A:0 T:0 00:20:00:00 0x21 3221 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 74:d2:42:9e:31:8d:ff:86 C:1 A:0 T:0 00:21:00:00 - ST318203FC from SEAGATE (Rev 0004) FCID is 0x7902e8 in VSAN 1016, PWWN is 21:00:00:20:37:67:f7:a2 ------------------------------------------------------------------------------ LUN Capacity Status Serial Number Device-Id (MB) ------------------------------------------------------------------------------ 0x0 18210 Online LRE8091500007039 C:1 A:0 T:3 20:00:00:20:37:67:f7:a2 vatican# show interface iscsi 2/1 iscsi2/1 is up Hardware is GigabitEthernet Port WWN is 20:41:00:0c:30:57:5e:c0 Admin port mode is ISCSI Port mode is ISCSI Speed is 1 Gbps iSCSI initiator is identified by name Number of iSCSI session: 0, Number of TCP connection: 0 Configured TCP parameters Local Port is 3260 PMTU discover is enabled, reset timeout is 3600 sec Keepalive-timeout is 60 sec Minimum-retransmit-time is 300 ms Max-retransmissions 4 Sack is disabled Maximum allowed bandwidth is 500000 kbps Minimum available bandwidth is 500000 kbps Estimated round trip time is 10000 usec 5 minutes input rate 16 bits/sec, 2 bytes/sec, 0 frames/sec 5 minutes output rate 16 bits/sec, 2 bytes/sec, 0 frames/sec iSCSI statistics Input 50920 packets, 60370032 bytes Command 3659 pdus, Data-out 41069 pdus, 56533832 bytes fragments 2476 Output 115914 packets, 112862928 bytes Response 3374 pdus (with sense 206), R2T 1897 pdus Data-in 103999 pdus, 106404584 bytes vatican# show interface gigabitethernet 2/1 GigabitEthernet2/1 is up Hardware is GigabitEthernet, address is 0005.3000.a85a Internet address is 10.48.69.242/26 MTU 1500 bytes Port mode is IPS Speed is 1 Gbps Beacon is turned off Auto-Negotiation is turned on iSCSI authentication: NONE 5 minutes input rate 440 bits/sec, 55 bytes/sec, 0 frames/sec 5 minutes output rate 80 bits/sec, 10 bytes/sec, 0 frames/sec 850346 packets input, 127958119 bytes 6488 multicast frames, 0 compressed 0 input errors, 0 frame, 0 overrun 0 fifo 289960 packets output, 201600774 bytes, 0 underruns 0 output errors, 0 collisions, 0 fifo 0 carrier errors vatican# show ip route Codes: C - connected, S - static Default gateway is 10.48.69.129 C 10.48.69.192/26 is directly connected, gigabitethernet2-1 C 10.48.69.128/26 is directly connected, mgmt0

Vatican からの表示（MDS 9216）

vatican# show zone status vsan 1016
 VSAN: 1016 default-zone: deny distribute: active only Interop: Off
 Full Zoning Database :
     Zonesets:1  Zones:3 Aliases: 0
 Active Zoning Database :
     Name: iscsidoc  Zonesets:1  Zones:3
 Status: Activation completed at Wed Sep 17 13:03:56 2003

 vatican# show zone active vsan 1016
 zone name jbod vsan 1016
 * fcid 0x7902e8 [pwwn 21:00:00:20:37:67:f7:a2]
 * fcid 0x790100 [symbolic-nodename 10.48.69.238]

 zone name spa vsan 1016
 * fcid 0x790104 [pwwn 50:06:01:60:88:02:a8:2b]
 * fcid 0x790100 [symbolic-nodename 10.48.69.238]

 zone name spb vsan 1016
 * fcid 0x790105 [pwwn 50:06:01:68:88:02:a8:2b]
 * fcid 0x790100 [symbolic-nodename 10.48.69.238]

 vatican# show flogi database vsan 1016
 ---------------------------------------------------------------------------
 INTERFACE  VSAN    FCID            PORT NAME               NODE NAME       
 ---------------------------------------------------------------------------
 fc1/3      1016  0x7902e8  21:00:00:20:37:67:f7:a2  20:00:00:20:37:67:f7:a2
 fc1/7      1016  0x790104  50:06:01:60:88:02:a8:2b  50:06:01:60:11:02:a8:2b
 fc1/11     1016  0x790105  50:06:01:68:88:02:a8:2b  50:06:01:60:11:02:a8:2b
 iscsi2/1   1016  0x790100  20:03:00:0c:30:57:5e:c2  20:02:00:0c:30:57:5e:c2

 Total number of flogi = 4.


 vatican# show fcns database vsan 1016
 VSAN 1016:
 --------------------------------------------------------------------------
 FCID        TYPE  PWWN                    (VENDOR)        FC4-TYPE:FEATURE
 --------------------------------------------------------------------------
 0x790100    N     20:03:00:0c:30:57:5e:c2 (Cisco)         scsi-fcp:init isc..w
 0x790104    N     50:06:01:60:88:02:a8:2b (Clariion)      scsi-fcp:target
 0x790105    N     50:06:01:68:88:02:a8:2b (Clariion)      scsi-fcp:target
 0x7902e8    NL    21:00:00:20:37:67:f7:a2 (Seagate)       scsi-fcp:target 
 Total number of entries = 4

 --- FCID 0X790100 is the virtual N port(HBA) for the iSCSI host.

 vatican# show fcns database detail vsan 1016
 ------------------------
 VSAN:1016  FCID:0x790100
 ------------------------
 port-wwn (vendor)     :20:03:00:0c:30:57:5e:c2 (Cisco)     
 node-wwn              :20:02:00:0c:30:57:5e:c2
 class                 :2,3
 node-ip-addr          :10.48.69.238
 ipa                   :ff ff ff ff ff ff ff ff
 fc4-types:fc4_features:scsi-fcp:init iscsi-gw 
 symbolic-port-name    :
 symbolic-node-name    :10.48.69.238
 port-type             :N 
 port-ip-addr          :0.0.0.0
 fabric-port-wwn       :20:41:00:0c:30:57:5e:c0
 hard-addr             :0x000000
 ------------------------
 VSAN:1016  FCID:0x790104
 ------------------------
 port-wwn (vendor)     :50:06:01:60:88:02:a8:2b (Clariion)  
 node-wwn              :50:06:01:60:11:02:a8:2b
 class                 :3
 node-ip-addr          :0.0.0.0
 ipa                   :ff ff ff ff ff ff ff ff
 fc4-types:fc4_features:scsi-fcp:target 
 symbolic-port-name    :
 symbolic-node-name    :
 port-type             :N 
 port-ip-addr          :0.0.0.0
 fabric-port-wwn       :20:07:00:0c:30:57:5e:c0
 hard-addr             :0x000000
 ------------------------
 VSAN:1016  FCID:0x790105
 ------------------------
 port-wwn (vendor)     :50:06:01:68:88:02:a8:2b (Clariion)  
 node-wwn              :50:06:01:60:11:02:a8:2b
 class                 :3
 node-ip-addr          :0.0.0.0
 ipa                   :ff ff ff ff ff ff ff ff
 fc4-types:fc4_features:scsi-fcp:target 
 symbolic-port-name    :
 symbolic-node-name    :
 port-type             :N 
 port-ip-addr          :0.0.0.0
 fabric-port-wwn       :20:0b:00:0c:30:57:5e:c0
 hard-addr             :0x000000
 ------------------------
 VSAN:1016  FCID:0x7902e8
 ------------------------
 port-wwn (vendor)     :21:00:00:20:37:67:f7:a2 (Seagate)   
 node-wwn              :20:00:00:20:37:67:f7:a2
 class                 :3
 node-ip-addr          :0.0.0.0
 ipa                   :ff ff ff ff ff ff ff ff
 fc4-types:fc4_features:scsi-fcp:target 
 symbolic-port-name    :

 symbolic-node-name    :
 port-type             :NL
 port-ip-addr          :0.0.0.0
 fabric-port-wwn       :20:03:00:0c:30:57:5e:c0
 hard-addr             :0x000000

 Total number of entries = 4


 vatican# show iscsi initiator 
 iSCSI Node name is 10.48.69.238 
     iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e
     iSCSI alias name: ape 
     Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) 
     Member of vsans: 1016
     Number of Virtual n_ports: 1
     Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
       Interface iSCSI 2/1, Portal group tag: 0x80 
       VSAN ID 1016, FCID 0x790100

 vatican# show iscsi initiator configured 
 iSCSI Node name is 10.48.69.238 
     Member of vsans: 1016

 vatican# show iscsi initiator detail
 iSCSI Node name is 10.48.69.238 
     iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e
     iSCSI alias name: ape 
     Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) 
     Member of vsans: 1016
     Number of Virtual n_ports: 1

     Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
       Interface iSCSI 2/1, Portal group tag is 0x80 
       VSAN ID 1016, FCID 0x790100
       2 FC sessions, 2 iSCSI sessions 
       iSCSI session details 
         Target: spa-vt
           Statistics:
             PDU: Command: 10, Response: 10
             Bytes: TX: 416, RX: 0
             Number of connection: 1
           TCP parameters 
             Local 10.48.69.242:3260, Remote 10.48.69.238:49500
             Path MTU: 1500 bytes
             Retransmission timeout: 300 ms
             Round trip time: Smoothed 62 ms, Variance: 3
             Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3
             Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
             Congestion window: Current: 4 KB
         Target: seagate
           Statistics:
             PDU: Command: 4, Response: 4
             Bytes: TX: 304, RX: 0
             Number of connection: 1
           TCP parameters 
             Local 10.48.69.242:3260, Remote 10.48.69.238:49501
             Path MTU: 1500 bytes
             Retransmission timeout: 300 ms
             Round trip time: Smoothed 62 ms, Variance: 3
             Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3
             Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
             Congestion window: Current: 4 KB

       FCP Session details 
         Target FCID: 0x790104 (S_ID of this session: 0x790100)
           pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b 
           Session state: LOGGED_IN 
           1 iSCSI sessions share this FC session 
             Target: spa-vt
           Negotiated parameters
             RcvDataFieldSize 1024 our_RcvDataFieldSize 1392
             MaxBurstSize 0, EMPD: FALSE 
             Random Relative Offset: FALSE, Sequence-in-order: Yes 
           Statistics:
             PDU: Command: 0, Response: 10
         Target FCID: 0x7902e8 (S_ID of this session: 0x790100)
           pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2 
           Session state: LOGGED_IN 
           1 iSCSI sessions share this FC session 
             Target: seagate
           Negotiated parameters
             RcvDataFieldSize 1392 our_RcvDataFieldSize 1392
             MaxBurstSize 0, EMPD: FALSE 
             Random Relative Offset: FALSE, Sequence-in-order: Yes 
           Statistics:
             PDU: Command: 0, Response: 4

 vatican# show iscsi initiator iscsi-session detail
 iSCSI Node name is 10.48.69.238 
     iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e
     iSCSI alias name: ape 
     Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) 
     Member of vsans: 1016
     Number of Virtual n_ports: 1
     Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
       Interface iSCSI 2/1, Portal group tag is 0x80 
       VSAN ID 1016, FCID 0x790100
       2 FC sessions, 2 iSCSI sessions 
       iSCSI session details 
         Target: spa-vt
           Statistics:
             PDU: Command: 10, Response: 10
             Bytes: TX: 416, RX: 0
             Number of connection: 1
           TCP parameters 
             Local 10.48.69.242:3260, Remote 10.48.69.238:49500
             Path MTU: 1500 bytes
             Retransmission timeout: 300 ms
             Round trip time: Smoothed 62 ms, Variance: 2
             Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3
             Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
             Congestion window: Current: 4 KB
         Target: seagate
           Statistics:
             PDU: Command: 4, Response: 4
             Bytes: TX: 304, RX: 0
             Number of connection: 1
           TCP parameters 
             Local 10.48.69.242:3260, Remote 10.48.69.238:49501
             Path MTU: 1500 bytes
             Retransmission timeout: 300 ms
             Round trip time: Smoothed 62 ms, Variance: 2
             Advertized window: Current: 256 KB, Maximum: 256 KB, Scale: 3
             Peer receive window: Current: 576 KB, Maximum: 576 KB, Scale: 4
             Congestion window: Current: 4 KB
			 
 vatican# show iscsi initiator fcp-session detail 
 iSCSI Node name is 10.48.69.238 
     iSCSI Initiator name: iqn.1987-05.com.cisco.01.a06c4e2b8b247cadceb8af1a8474da1e
     iSCSI alias name: ape 
     Node WWN is 20:02:00:0c:30:57:5e:c2 (dynamic) 
     Member of vsans: 1016
     Number of Virtual n_ports: 1
     Virtual Port WWN is 20:03:00:0c:30:57:5e:c2 (dynamic)
       Interface iSCSI 2/1, Portal group tag is 0x80 
       VSAN ID 1016, FCID 0x790100
       2 FC sessions, 2 iSCSI sessions 
       FCP Session details 
         Target FCID: 0x790104 (S_ID of this session: 0x790100)
           pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b 
           Session state: LOGGED_IN 
           1 iSCSI sessions share this FC session 
             Target: spa-vt
           Negotiated parameters
             RcvDataFieldSize 1024 our_RcvDataFieldSize 1392
             MaxBurstSize 0, EMPD: FALSE 
             Random Relative Offset: FALSE, Sequence-in-order: Yes 
           Statistics:
             PDU: Command: 0, Response: 10
         Target FCID: 0x7902e8 (S_ID of this session: 0x790100)
           pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2 
           Session state: LOGGED_IN 
           1 iSCSI sessions share this FC session 
             Target: seagate
           Negotiated parameters
             RcvDataFieldSize 1392 our_RcvDataFieldSize 1392
             MaxBurstSize 0, EMPD: FALSE 
             Random Relative Offset: FALSE, Sequence-in-order: Yes 
           Statistics:
             PDU: Command: 0, Response: 4
			 
 vatican# show iscsi virtual-target configured
 target: seagate 
   * Port WWN 21:00:00:20:37:67:f7:a2 
   === The "*" means you have both discovery and target session. If there
 is no "*" in front of the pWWN, it means you only have discovery session.
  Configured node
     No. of LU mapping: 1
       iSCSI LUN: 0000, FC LUN: 0000
     No. of advertised interface: 1
       GigabitEthernet 2/1
     No. of initiators permitted: 1 
       initiator 10.48.69.238/32 is permitted 
     all initiator permit is disabled 
 target: spa-vt 
   * Port WWN 50:06:01:60:88:02:a8:2b 
     Secondary PWWN 50:06:01:68:88:02:a8:2b
     Configured node
     No. of LU mapping: 2
       iSCSI LUN: 0003, FC LUN: 0020
       iSCSI LUN: 0004, FC LUN: 0021
     No. of advertised interface: 1
       GigabitEthernet 2/1
     No. of initiators permitted: 1 
       initiator 10.48.69.238/32 is permitted 
     all initiator permit is disabled 
	 
 vatican# show iscsi stats iscsi 2/1
 iscsi2/1 
     5 minutes input rate 16 bits/sec, 2 bytes/sec, 0 frames/sec
     5 minutes output rate 16 bits/sec, 2 bytes/sec, 0 frames/sec
     iSCSI statistics 
       50932 packets input, 60370640 bytes 
         Command 3659 pdus, Data-out 41069 pdus, 56533832 bytes, 2476 fragments 
       output 115926 packets, 112863536 bytes
         Response 3374 pdus (with sense 206), R2T 1897 pdus 
         Data-in 103999 pdus, 106404584 bytes 
		 
 vatican# show ips arp interface gigabitethernet 2/1
 Protocol         Address   Age (min)   Hardware Addr  Type   Interface
 Internet    10.48.69.200        0     0008.e21e.c7bc  ARPA  GigabitEthernet2/1
 Internet    10.48.69.201        5     0202.3d30.45c9  ARPA  GigabitEthernet2/1
 Internet    10.48.69.206        5     0202.3d30.45ce  ARPA  GigabitEthernet2/1
 Internet    10.48.69.209        3     0202.3d30.45d1  ARPA  GigabitEthernet2/1
 Internet    10.48.69.226        2     0060.08f6.bc1a  ARPA  GigabitEthernet2/1
 Internet    10.48.69.229        4     0800.209e.edab  ARPA  GigabitEthernet2/1
 Internet    10.48.69.231        1     0002.b3c1.7dab  ARPA  GigabitEthernet2/1
 Internet    10.48.69.233        0     0010.4200.7d5b  ARPA  GigabitEthernet2/1
 Internet    10.48.69.238        0     0030.6e1b.6f51  ARPA  GigabitEthernet2/1
 Internet    10.48.69.239       10     0030.6e1c.a00b  ARPA  GigabitEthernet2/1
 Internet    10.48.69.241        0     000b.cdaf.b4c3  ARPA  GigabitEthernet2/1
 Internet    10.48.69.248        4     0202.3d30.45f8  ARPA  GigabitEthernet2/1
 Internet    10.48.69.252        1     0202.3d30.45fc  ARPA  GigabitEthernet2/1
 Internet      10.10.2.28        7     0202.3d0a.021c  ARPA  GigabitEthernet2/1
 
 vatican# show ips stats tcp interface gigabitethernet 2/1 detail 
 TCP Statistics for port GigabitEthernet2/1
     TCP send stats
       261205 segments, 117757220 bytes
       140632 data, 51907 ack only packets
       2655 control (SYN/FIN/RST), 0 probes, 2639 window updates
       63382 segments retransmitted, 90885612 bytes
       63382 retransmitted while on ethernet send queue, 1 packets split
       13327 delayed acks sent
     TCP receive stats
       249073 segments, 72669 data packets in sequence, 61525764 bytes in sequence
       2335 predicted ack, 68605 predicted data
       0 bad checksum, 0 multi/broadcast, 0 bad offset
       0 no memory drops, 0 short segments
       4396 duplicate bytes, 205 duplicate packets
       0 partial duplicate bytes, 0 partial duplicate packets
       0 out-of-order bytes, 2625 out-of-order packets
       0 packet after window, 0 bytes after window
       0 packets after close
       80504 acks, 117762158 ack bytes, 0 ack toomuch, 96274 duplicate acks
       0 ack packets left of snd_una, 7 non-4 byte aligned packets
       54199 window updates, 0 window probe
       6343 pcb hash miss, 709 no port, 6 bad SYN, 0 paws drops
     TCP Connection Stats
       0 attempts, 2718 accepts, 2718 established
       2716 closed, 15 drops, 0 conn drops
       3 drop in retransmit timeout, 10 drop in keepalive timeout
       0 drop in persist drops, 0 connections drained
     TCP Miscellaneous Stats
       37062 segments timed, 41787 rtt updated
       817 retransmit timeout, 1 persist timeout
       22654 keepalive timeout, 22643 keepalive probes
     TCP SACK Stats
       0 recovery episodes, 0 data packets, 0 data bytes
       0 data packets retransmitted, 0 data bytes retransmitted
       0 connections closed, 0 retransmit timeouts
     TCP SYN Cache Stats
       2720 entries, 2718 connections completed, 0 entries timed out
       0 dropped due to overflow, 2 dropped due to RST
       0 dropped due to ICMP unreach, 0 dropped due to bucket overflow
       0 abort due to no memory, 2 duplicate SYN, 183 no-route SYN drop
       0 hash collisions, 0 retransmitted
     TCP Active Connections 
       Local  Address        Remote Address        State      Send-Q   Recv-Q
       10.48.69.242:3260     10.48.69.238:49499    ESTABLISH  0        0
       10.48.69.242:3260     10.48.69.238:49500    ESTABLISH  0        0
       10.48.69.242:3260     10.48.69.238:49501    ESTABLISH  0        0
       0.0.0.0:3260          0.0.0.0:0             LISTEN     0        0
 vatican# discover scsi-target local 
 discovery started
 
 vatican# show scsi-target devices vsan 1016
 --------------------------------------------------------------------------------
 VSAN    FCID        PWWN                      VENDOR    MODEL             REV 
 --------------------------------------------------------------------------------
 1016    0x790104    50:06:01:60:88:02:a8:2b   DGC       RAID 0            0632
 1016    0x7902e8    21:00:00:20:37:67:f7:a2   SEAGATE   ST318203FC        0004
 vatican# show scsi-target lun vsan 1016

 - RAID from DGC (Rev 0632)
   FCID is 0x790104 in VSAN 1016, PWWN is 50:06:01:60:88:02:a8:2b
   ------------------------------------------------------------------------------
   LUN    Capacity  Status  Serial Number    Device-Id
          (MB)
   ------------------------------------------------------------------------------
   0x0    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          da:05:b6:a9:b6:9d:7b:00
                                              C:1 A:0 T:0 00:00:00:00
   0x1    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          6a:66:0d:74:cb:33:88:6c
                                              C:1 A:0 T:0 00:01:00:00
   0x2    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          ec:81:5b:a2:c4:43:0d:8a
                                              C:1 A:0 T:0 00:02:00:00
   0x3    2147      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          e0:47:b3:be:3b:00:e0:d5
                                              C:1 A:0 T:0 00:03:00:00
   0x4    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          00:51:5b:7f:3d:9a:7b:ce
                                              C:1 A:0 T:0 00:04:00:00
   0x5    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          ab:b1:ae:80:59:c0:fc:f0
                                              C:1 A:0 T:0 00:05:00:00
   0x6    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          ad:91:58:af:d2:fd:c7:47
                                              C:1 A:0 T:0 00:06:00:00
   0x7    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          b1:ef:e7:6c:44:5c:16:97
                                              C:1 A:0 T:0 00:07:00:00
   0x8    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          84:4f:09:60:30:1e:fc:50
                                              C:1 A:0 T:0 00:08:00:00
   0x9    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          aa:6d:e2:0e:ce:7a:cc:21
                                              C:1 A:0 T:0 00:09:00:00
   0xa    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          5b:66:67:89:6c:f2:d1:56
                                              C:1 A:0 T:0 00:0a:00:00
   0xb    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          a9:32:bd:04:4a:bb:3d:9b
                                              C:1 A:0 T:0 00:0b:00:00
   0xc    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          cd:d9:96:f7:57:3f:07:0c
                                              C:1 A:0 T:0 00:0c:00:00
   0xd    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          0c:e5:ba:39:68:ca:d6:f0
                                              C:1 A:0 T:0 00:0d:00:00
   0xe    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          60:6e:ee:76:98:fc:ab:97
                                              C:1 A:0 T:0 00:0e:00:00
   0xf    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          8b:58:80:7b:12:fb:6b:12
                                              C:1 A:0 T:0 00:0f:00:00
   0x10   1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          a1:2f:6d:b0:c3:d6:c2:46
                                              C:1 A:0 T:0 00:10:00:00
   0x11   1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          2c:48:c4:74:25:4b:26:dd
                                              C:1 A:0 T:0 00:11:00:00
   0x20   5369      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          ba:18:6a:40:22:40:94:75
                                              C:1 A:0 T:0 00:20:00:00
   0x21   3221      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                          74:d2:42:9e:31:8d:ff:86
                                              C:1 A:0 T:0 00:21:00:00

 - ST318203FC from SEAGATE (Rev 0004)
   FCID is 0x7902e8 in VSAN 1016, PWWN is 21:00:00:20:37:67:f7:a2
   ------------------------------------------------------------------------------
   LUN    Capacity  Status  Serial Number    Device-Id
          (MB)
   ------------------------------------------------------------------------------
   0x0    18210     Online  LRE8091500007039 C:1 A:0 T:3 20:00:00:20:37:67:f7:a2


 vatican# show interface iscsi 2/1
 iscsi2/1 is up
     Hardware is GigabitEthernet
     Port WWN is 20:41:00:0c:30:57:5e:c0
     Admin port mode is ISCSI
     Port mode is ISCSI
     Speed is 1 Gbps
     iSCSI initiator is identified by name 
     Number of iSCSI session: 0, Number of TCP connection: 0 
     Configured TCP parameters 
         Local Port is 3260 
         PMTU discover is enabled, reset timeout is 3600 sec
         Keepalive-timeout is 60 sec
         Minimum-retransmit-time is 300 ms
         Max-retransmissions 4
         Sack is disabled 
         Maximum allowed bandwidth is 500000 kbps
         Minimum available bandwidth is 500000 kbps
         Estimated round trip time is 10000 usec
     5 minutes input rate 16 bits/sec, 2 bytes/sec, 0 frames/sec
     5 minutes output rate 16 bits/sec, 2 bytes/sec, 0 frames/sec
     iSCSI statistics 
       Input 50920 packets, 60370032 bytes 
         Command 3659 pdus, Data-out 41069 pdus, 56533832 bytes fragments 2476
       Output 115914 packets, 112862928 bytes
         Response 3374 pdus (with sense 206), R2T 1897 pdus
         Data-in 103999 pdus, 106404584 bytes


 vatican# show interface gigabitethernet 2/1
 GigabitEthernet2/1 is up
     Hardware is GigabitEthernet, address is 0005.3000.a85a
     Internet address is 10.48.69.242/26
     MTU 1500  bytes
     Port mode is IPS
     Speed is 1 Gbps
     Beacon is turned off
     Auto-Negotiation is turned on
     iSCSI authentication: NONE
     5 minutes input rate 440 bits/sec, 55 bytes/sec, 0 frames/sec
     5 minutes output rate 80 bits/sec, 10 bytes/sec, 0 frames/sec
     850346 packets input, 127958119 bytes
       6488 multicast frames, 0 compressed
       0 input errors, 0 frame, 0 overrun 0 fifo
     289960 packets output, 201600774 bytes, 0 underruns
       0 output errors, 0 collisions, 0 fifo
       0 carrier errors

 vatican# show ip route

 Codes: C - connected, S - static

 Default gateway is 10.48.69.129

 C 10.48.69.192/26 is directly connected, gigabitethernet2-1
 C 10.48.69.128/26 is directly connected, mgmt0