NAT を使用せずにルータのモードコンフィギュレーション、ワイルドカード事前共有キーを設定する方法

Network Security policy: 

1- Myconn 
        My Identity = ip address
                Connection security: Secure 
                Remote Party Identity and addressing 
                        ID Type: IP subnet 
                        88.88.88.0
                        Port all Protocol all 

                Connect using secure tunnel 
                        ID Type: IP address 
                        99.99.99.1
                        Pre-shared key = cisco123

        Authentication (Phase 1) 
        Proposal 1 
                Authentication method: pre-shared key 
                Encryp Alg: DES 
                Hash Alg: MD5 
                SA life: Unspecified
                Key Group: DH 1 

        Key exchange (Phase 2) 
        Proposal 1 
                Encapsulation ESP 
                Encrypt Alg: DES 
                Hash Alg: MD5 
                Encap: tunnel 
                SA life: Unspecified 
                no AH 

2- Other Connections 
            Connection security: Non-secure 
            Local Network Interface 
                Name: Any 
                IP Addr: Any 
                Port: All 

version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname router
!
enable password ww
!
username cisco password 0 cisco
!
clock timezone EST -5
ip subnet-zero
cns event-service server
!

crypto isakmp policy 1
 hash md5
 authentication pre-share
crypto isakmp key cisco123 address 0.0.0.0        
crypto isakmp client configuration address-pool local ourpool
!
crypto ipsec transform-set trans1 esp-des esp-md5-hmac 
!
crypto dynamic-map dynmap 10
 set transform-set trans1 
crypto map intmap client configuration address initiate
crypto map intmap client configuration address respond
crypto map intmap 10 ipsec-isakmp dynamic dynmap
!
interface Ethernet0
 
 ip address 99.99.99.1 255.255.255.0
 no ip directed-broadcast
 no ip route-cache
 no ip mroute-cache
 
 crypto map intmap
!
interface Ethernet1
 ip address 88.88.88.1 255.255.255.0
 no ip directed-broadcast
!

ip local pool ourpool 10.2.1.1 10.2.1.254
ip classless
no ip http server
!
line con 0
 exec-timeout 0 0
 transport input none
line aux 0
line vty 0 4
 password ww
 login
!
end