Objetos MIB equivalentes para los Comandos show de VoIP

Opciones de descarga

  • PDF     (138.7 KB)
    Visualice con Adobe Reader en una variedad de dispositivos
  • ePub     (90.4 KB)
    Visualice en diferentes aplicaciones en iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (84.0 KB)
    Visualice en dispositivo Kindle o aplicación Kindle en múltiples dispositivos
Actualizado:26 de octubre de 2005
ID del documento:63607

Lenguaje no discriminatorio

El conjunto de documentos para este producto aspira al uso de un lenguaje no discriminatorio. A los fines de esta documentación, "no discriminatorio" se refiere al lenguaje que no implica discriminación por motivos de edad, discapacidad, género, identidad de raza, identidad étnica, orientación sexual, nivel socioeconómico e interseccionalidad. Puede haber excepciones en la documentación debido al lenguaje que se encuentra ya en las interfaces de usuario del software del producto, el lenguaje utilizado en función de la documentación de la RFP o el lenguaje utilizado por un producto de terceros al que se hace referencia. Obtenga más información sobre cómo Cisco utiliza el lenguaje inclusivo.

Acerca de esta traducción

Cisco ha traducido este documento combinando la traducción automática y los recursos humanos a fin de ofrecer a nuestros usuarios en todo el mundo contenido en su propio idioma. Tenga en cuenta que incluso la mejor traducción automática podría no ser tan precisa como la proporcionada por un traductor profesional. Cisco Systems, Inc. no asume ninguna responsabilidad por la precisión de estas traducciones y recomienda remitirse siempre al documento original escrito en inglés (insertar vínculo URL).

Introducción

Este documento aborda los objetos MIB equivalentes que proporcionan la información incorporada en diversos comandos de verificación de voz sobre IP (VoIP). Las aplicaciones diversos y/o scripts pueden utilizar potencialmente esta información.

Prerequisites

Requirements

No hay requisitos específicos para este documento.

Componentes Utilizados

Este documento no se limita a versiones de software específicas. Sin embargo, está escrito específicamente para un router de la serie 3600 de Cisco con una tarjeta NM-2V.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Convenciones

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Configuración

Este resultado muestra una parte relevante de la configuración que este documento utiliza: 

VoipRouter#show running-configuration
Building configuration...

Current configuration : 5412 bytes
!
version 12.3
...
!
snmp-server community public RO
!
...
!
voice-port 2/0/0
!
...
!
dial-peer voice 2000 pots
 destination-pattern 2000
 port 2/0/0
!
dial-peer voice 1000 voip
 destination-pattern 1000
 session target ipv4:172.16.99.22
!
...
end

Comandos VoIP

Estas secciones muestran los objetos MIB que corresponden al resultado de estos comandos de verificación VoIP:

La información que contienen estos comandos de verificación de VoIP se puede extraer de IF-MIB, CISCO-VOICE-IF-MIB, CISCO-VOICE-ANALOG-IF-MIB, CISCO-VOICE-DIAL-CONTROL-MIB, DIAL-CONTROL-MIB y CISCO-DSP-MGMT .

Nota: En estos ejemplos, el tramo de Telefonía se indexa por 1102799 y el tramo H.323 se indexa por 1102966.

show voice port summary

Nota: El texto en negrita del comando show voice port summary se describe en la sección Objetos MIB Equivalentes. 

VoipRouter#show voice port summary
                                      IN           OUT
PORT      CH   SIG-TYPE   ADMIN OPER  STATUS       STATUS   EC
========= == ============ ===== ====  ========     ======== ==
2/0/0(A1) --  fxs-ls(A2)  up(A3)up(A4) off-hook(A5) idle     y(A6) 
2/0/1     --  fxs-ls      up    dorm   on-hook      idle     y

Objetos MIB equivalentes 

A1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

A2  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)

A3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

A4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

A5  —  CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)

A6  —  CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)

Nota: Ningún Objeto MIB mantiene el valor contenido en la parte CH del comando show voice port summary cuando se utiliza la tarjeta NM-2V.

show voice call summary

Nota: El texto en negrita del comando show voice call summary se describe en la sección Objetos MIB Equivalentes. 

VoipRouter#show voice call summary
PORT         CODEC      VAD   VTSP STATE            VPM STATE
============ ========   ===   ==================== ======================
2/0/0(B1)    g729r8(B2) y(B3) S_CONNECT             FXSLS_CONNECT            
2/0/1         -         -       -                   FXSLS_ONHOOK

Objetos MIB equivalentes 

B1  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

B2  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.
       1102966.1 = INTEGER: ietfg729r8000(25)

B3  —  CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.
       1102966.1 = INTEGER: true(1)

Nota: Ningún objeto MIB mantiene los estados Proveedor de servicios de telefonía de voz (VTSP) y VPM individualmente. Utilice callActiveCallState desde DIAL-CONTROL-MIB en su lugar.

show dial-peer voice summary

Nota: El texto en negrita del comando show dial-peer voice summary se describe en la sección Objetos MIB Equivalentes. 

VoipRouter#show dial-peer voice summary
dial-peer hunt 0
             AD                                        PRE  PASS
TAG      TYPE     MIN     OPER    PREFIX DEST-PATTERN  FER  THRU SESS-TARGET   PORT
2000(C1) pots(C2)  up(C3)  up(C4) 9(C5)   2000(C6)     0(C7)                2/0/0(C8)
1000     voip      up      up             1000         0    syst ipv4:172.16.99.22(C9)

Objetos MIB equivalentes 

C1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90

    —  DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37
C2  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)

C3  —  IF-MIB::ifAdminStatus.37 = INTEGER: up(1)

C4  —  IF-MIB::ifOperStatus.37 = INTEGER: up(1)

C5  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9

C6  —  DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000

C7  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0

C8  —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

C9  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 = 
       STRING: ipv4:172.16.99.22

Nota: No MIB Object mantiene el valor contenido en la parte del método PASS THRU del comando show dial-peer summary.

show call active voice brief

Nota: El texto en negrita del comando show call active voice brief se describe en la sección Objetos MIB Equivalentes. 

VoIPRouter#show call active voice brief 
   
<ID>:<start>hs.<index> +<connect> pid:<peer_id> <dir> <addr> <state>  
  dur hh:mm:ss tx:<packets>/<bytes> rx:<packets>/<bytes>  
 IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late>  
  delay:<last>/<min>/<max>ms <codec>  
  MODEMPASS <method> buf:<fills>/<drains> loss <overall%>  
<multipkt>/<corrected>  
   last <buf event time>s dur:<Min>/<Max>s  
 FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>  
  sig:<on/off> <codec> (payload size)  
ATM <protocol> [int vpi/vci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>  
  sig:<on/off> <codec> (payload size)  
 Tele <int>:tx:<tot>/<v>/<fax>ms <codec> noise:<l> acom:<l> i/o:<l>/<l>  
dBm  
MODEMRELAY info:<rcvd>/<sent>/<resent> xid:<rcvd>/<sent>  
total:<rcvd>/<sent>/<drops>  
 Proxy <ip>:<audio udp>,<video udp>,<tcp0>,<tcp1>,<tcp2>,<tcp3> endpt: 
<type>/<manf>  
 bw:<req>/<act> codec:<audio>/<video>  
  tx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120  
pkts>/<t120 bytes>  
 rx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120  
pkts>/<t120 bytes>  
Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2
11D9 : 1102799(D1)hs.1 +1324 pid:2000(D2) Answer(D3) 2000(D4) active(D5)
 dur 1d19h(D6) tx:7875641(D7)/157512782(D8) rx:7875955(D9)/157519081(D10)
 Tele 2/0/0(D11):1: tx:157515460(D12)/157514630(D13)/0ms g729r8(D14)
 noise:-56(D15) acom:5(D16)  i/0:-40(D17)/-46(D18) dBm

11D9 : 1102966hs.1 +1157 pid:1000 Originate 1000 active
 dur 1d19h tx:7875388/157507741 rx:7875641/157512782
 IP 172.16.99.22(D19):19066(D20) rtt:6ms(D21) pl:157496940(D22)/4770ms(D23)
 lost:52(D24)/1(D25)/325(D26) delay:67(D27)/55(D28)/132ms(D29) g729r8

Telephony call-legs: 1
SIP call-legs: 0
H323 call-legs: 1
MGCP call-legs: 0
Total call-legs: 2

Objetos MIB equivalentes 

D1  —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1
       = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC

D2  —  DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000

D3  —  DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)

D4  —  DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000

D5  —  DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)

D6  —  DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks: 
       (1104123) 3:04:01.23
    —  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (16590203) 1 days, 
       22:05:02.03

D7  —  DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641

D8  —  DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782

D9  —  DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955

D10 —  DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081

D11 —  IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0

D12 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.
       1102799.1 = Gauge32: 157515460 milliseconds

D13 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.
       1102799.1 = Gauge32: 157514630 milliseconds

D14 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.
       1102799.1 = INTEGER: ietfg729r8000(25)

D15 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.
       1102799.1 = INTEGER: -56 dBm

D16 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.
       1102799.1 =  INTEGER: 5 dB

D17 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.
       1102799.1 = INTEGER: -40 dBm

D18 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.
       1102799.1 = INTEGER: -46 dBm

D19 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.
       1102966.1 = IpAddress: 172.16.99.22

D20 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.
       1102966.1 = INTEGER: 19066

D21 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.
       1102966.1 = Gauge32: 6 milliseconds

D22 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.
       1102966.1 = Gauge32: 157496940 milliseconds

D23 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.
       1102966.1 = Gauge32: 1090 milliseconds
    —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.
       1102966.1 = Gauge32: 3680 milliseconds
    —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.
       1102966.1 = Gauge32: 0 milliseconds

D24 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.
       1102966.1 = Gauge32: 52 packets

D25 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.
       1102966.1 = Gauge32: 1 packets

D26 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.
       1102966.1 = Gauge32: 325 packets

D27 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.
       1102966.1 = Gauge32: 67

D28 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.
       1102966.1 = Gauge32: 55 milliseconds

D29 —  CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.
       1102966.1 = Gauge32: 132 milliseconds

Nota: El valor GapFill del comando show call active voice brief se obtiene al agregar los objetos SNMP cvVoIPCallActiveGapFillWithSilence, cvVoIPCallActiveGapFillWithPrediction y cvVoIPCallActiveGapFillWithInterpolation ...

show voice dsp 

VoIPRouter#show voice dsp
 
DSP  DSP             DSPWARE CURR  BOOT                         PAK     TX/RX
TYPE NUM CH CODEC    VERSION STATE STATE   RST AI VOICEPORT TS ABORT  PACK COUNT
==== === == ======== ======= ===== ======= === == ========= == ===== ============
C549 009 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     05     0         0/36
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     06     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     07     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     08     0          0/0
C549 010 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     09     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     10     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     11     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     12     0          0/0
C549 011 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     13     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     14     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     15     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     16     0          0/0
C549 012 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     17     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     18     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     19     0          0/0
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     20     0          0/0
C549 013 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     21     0          0/0
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     22     0          0/0
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     23     0         0/12
         04 g729r8    4.1.31 busy  idle         0 1/0:0     24     0    176/56702
C549 014 01 {medium}  4.1.31 IDLE  idle      0  0 1/0:0     01     0         0/27
         02 {medium}  4.1.31 IDLE  idle         0 1/0:0     02     0         0/12
         03 {medium}  4.1.31 IDLE  idle         0 1/0:0     03     0         0/12
         04 {medium}  4.1.31 IDLE  idle         0 1/0:0     04     0         0/12

Estos son algunos objetos MIB útiles que proporcionan información sobre la llamada activa en el resultado de ejemplo del comando show voice dsp:

CISCO-DSP-MGMT-MIB::cdspCardIndex.7 = INTEGER: 2
OLD-CISCO-CHASSIS-MIB::cardType.2 = INTEGER: hdv(516)
OLD-CISCO-CHASSIS-MIB::cardDescr.2 = STRING: "High Density Voice"
ENTITY-MIB::entPhysicalDescr.7 = STRING: High Density Voice
ENTITY-MIB::entPhysicalDescr.22 = STRING: DSP (C549)
CISCO-DSP-MGMT-MIB::cdspCardState.7 = INTEGER: normal(1)
CISCO-DSP-MGMT-MIB::cdspCardMaxChanPerDSP.7 = Gauge32: 4 channels
CISCO-DSP-MGMT-MIB::cdspTotalChannels.22 = Gauge32: 4 channels
CISCO-DSP-MGMT-MIB::cdspActiveChannels.21 = Gauge32: 1 channels

Nota: La MIB que contiene la información para show voice dsp es CISCO-DSP-MGMT-MIB. Sin embargo, debido al ID de bug Cisco CSCeb62542 para la tarjeta NM-2V, los DSP en NM-2V no se muestran en ENTITY-MIB. Dado que cdspCardStatusTable depende de entPhysicalIndex de ENTITY-MIB, cdspCardStatusTable no se rellena para la tarjeta NM-2V.

Appendix

Esta salida muestra la snmpwalk completa de ciscoVoiceAnalogIfMIB de CISCO-VOICE-ANALOG-IF-MIB en el momento de los comandos de verificación VoIP que se muestran en este documento:

snmpwalk -c public 172.16.100.20 CISCO-VOICE-ANALOG-IF-MIB:ciscoVoiceAnalogIfMIB
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.37 = INTEGER: ohms600Real(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.38 = INTEGER: ohms600Real(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.37 = INTEGER: voice(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.38 = INTEGER: none(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.37 = INTEGER: none(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.38 = INTEGER: none(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.37 = Counter32: 0
CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.38 = Counter32: 0
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.38 = INTEGER: fxsLoopStart(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.37 = INTEGER: ringFrequency25(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.38 = INTEGER: ringFrequency25(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.38 = INTEGER: onHook(1)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.37 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.38 = INTEGER: false(2)
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.37 = 
INTEGER: 100 milliseconds
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.38 = 
INTEGER: 100 milliseconds
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.37 = 
INTEGER: 100 milliseconds
CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.38 = 
INTEGER: 100 milliseconds

Esta salida muestra la snmpwalk completa de ciscoVoiceInterfaceMIB de CISCO-VOICE-IF-MIB en el momento de los comandos de verificación VoIP que se muestran en este documento: 

snmpwalk -c public 172.16.100.20 CISCO-VOICE-IF-MIB:ciscoVoiceInterfaceMIB
CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.37 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.38 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.37 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.38 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.37 = INTEGER: -38 dBm
CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.38 = INTEGER: -38 dBm
CISCO-VOICE-IF-MIB::cvIfCfgInGain.37 = INTEGER: 0 dB
CISCO-VOICE-IF-MIB::cvIfCfgInGain.38 = INTEGER: 0 dB
CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.37 = INTEGER: 3 dB
CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.38 = INTEGER: 3 dB
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.38 = INTEGER: true(1)
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.37 = INTEGER: 4
CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.38 = INTEGER: 4
CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.37 = INTEGER: normal(1)
CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.38 = INTEGER: normal(1)
CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.37 = STRING: 
CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.38 = STRING: 
CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.37 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.38 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.37 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.38 = INTEGER: 10 seconds
CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.37 = STRING: "US"
CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.38 = STRING: "US"
CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.37 = INTEGER: 1
CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.38 = INTEGER: 1
CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.37 = INTEGER: 1
CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.38 = INTEGER: 1

Esta salida muestra la snmpwalk completa de ciscoVoiceDialControlMIB de CISCO-VOICE-DIAL-CONTROL-MIB en el momento de los comandos de verificación VoIP que se muestran en este documento: 

snmpwalk -c public 172.16.100.20 CISCO-VOICE-DIAL-CONTROL-MIB:ciscoVoiceDialControlMIB
CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralPoorQoVNotificationEnable.0 = INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.1000 = INTEGER: 91
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.1000 = INTEGER: voip(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.1000 = INTEGER: active(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.2000 = INTEGER: active(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.1000 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.2000 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgSessionTarget.90 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDIDCallEnable.90 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgCasGroup.90 = INTEGER: -1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgRegisterE164.90 = INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgForwardDigits.90 = INTEGER: -1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEntry.7.90 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionProtocol.91 = INTEGER: cisco(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDesiredQoS.91 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMinAcceptableQoS.91 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 = 
STRING: ipv4:172.16.99.22
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderRate.91 = 
INTEGER: g729IETFr8000(16)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxRate.91 = INTEGER: voiceRate(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgVADEnable.91 = INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgExpectFactor.91 = 
INTEGER: 0 equipment impairment factor (eif)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIcpif.91 = 
INTEGER: 20 equipment impairment factor (eif)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable.91 = 
INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgUDPChecksumEnable.91 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIPPrecedence.91 = INTEGER: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgTechPrefix.91 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDigitRelay.91 = Hex-STRING: 00 
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderBytes.91 = INTEGER: 20 bytes
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxBytes.91 = INTEGER: 20 bytes
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgInBandSignaling.91 = INTEGER: cas(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgEntry.23.91 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.90 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.91 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.90 = 
INTEGER: -1 connections
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.91 = 
INTEGER: -1 connections
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.90 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.91 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.91 = INTEGER: 0
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.90 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.91 = INTEGER: false(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.90 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.91 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1 = 
Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.1102799.1 = 
Gauge32: 157515460 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.1102799.1 = 
Gauge32: 157514630 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveFaxTxDuration.1102799.1 = 
Gauge32: 0 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.1102799.1 = 
INTEGER: ietfg729r8000(25)
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.1102799.1 = INTEGER: -56 dBm
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.1102799.1 = INTEGER: 5 dB
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.1102799.1 = 
INTEGER: -46 dBm
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.1102799.1 = 
INTEGER: -40 dBm
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveERLLevel.1102799.1 = INTEGER: 5 dB
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveSessionTarget.1102799.1 = STRING: 
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveImgPageCount.1102799.1 = Gauge32: 0 pages
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.13.1102799.1 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.14.1102799.1 = INTEGER: 2
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.15.1102799.1 = INTEGER: 19971
CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.17.1102799.1 = INTEGER: 5
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveConnectionId.1102966.1 = 
Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.1102966.1 = 
IpAddress: 172.16.99.22
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.1102966.1 = 
INTEGER: 19066
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.1102966.1 = 
Gauge32: 6 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSelectedQoS.1102966.1 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionProtocol.1102966.1 = 
INTEGER: cisco(2)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionTarget.1102966.1 = 
STRING: ipv4:172.16.99.22
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.1102966.1 = 
Gauge32: 157496940 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.1102966.1 = 
Gauge32: 1090 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.1102966.1 = 
Gauge32: 3680 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.1102966.1 = 
Gauge32: 0 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithRedundancy.1102966.1 = 
Gauge32: 0 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.1102966.1 = 
Gauge32: 132 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.1102966.1 = 
Gauge32: 55 milliseconds
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.1102966.1 = 
Gauge32: 67
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveVADEnable.1102966.1 = 
INTEGER: true(1)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveCoderTypeRate.1102966.1 = 
INTEGER: ietfg729r8000(25)
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.1102966.1 = 
Gauge32: 52 packets
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.1102966.1 = 
Gauge32: 1 packets
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.1102966.1 = 
Gauge32: 325 packets
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.21.1102966.1 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.22.1102966.1 = ""
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.23.1102966.1 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.24.1102966.1 = 
STRING: "172.16.99.22"
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.25.1102966.1 = INTEGER: 1720
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.26.1102966.1 = INTEGER: 1
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.27.1102966.1 = 
STRING: "172.16.99.22"
CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.28.1102966.1 = INTEGER: 19066

Esta salida muestra la snmpwalk completa de ciscoVoiceCommonDialControlMIB de CISCO-VOICE-DIAL-CONTROL-MIB en el momento de los comandos de verificación VoIP que se muestran en este documento: 

snmpwalk -c public 172.16.100.20 CISCO-VOICE-COMMON-DIAL-CONTROL-MIB:
ciscoVoiceCommonDialControlMIB
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveConnectionId.
1102966.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable.
1102966.1 = INTEGER: true(1)
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate.
1102966.1 = INTEGER: ietfg729r8000(25)
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCodecBytes.
1102966.1 = INTEGER: 20
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveInBandSignaling.
1102966.1 = INTEGER: cas(1)
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.6.
1102966.1 = ""
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.7.
1102966.1 = INTEGER: 2

Esta salida muestra la snmpwalk completa de dialControlMib de DIAL-CONTROL-MIB en el momento de los comandos de verificación VoIP que se muestran en este documento: 

snmpwalk -c public 172.16.100.20 DIAL-CONTROL-MIB:dialControlMib
DIAL-CONTROL-MIB::dialCtlAcceptMode.0 = INTEGER: acceptAll(2)
DIAL-CONTROL-MIB::dialCtlTrapEnable.0 = INTEGER: enabled(1)
DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.1000.91 = INTEGER: voiceOverIp(104)
DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.2000.90 = INTEGER: voiceFXS(102)
DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37
DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.1000.91 = STRING: 1000
DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000
DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.1000.91 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.2000.90 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.1000.91 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.2000.90 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.1000.91 = INTEGER: speech(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.2000.90 = INTEGER: speech(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.1000.91 = INTEGER: both(3)
DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.2000.90 = INTEGER: both(3)
DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.1000.91 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.2000.90 = INTEGER: 0
DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.1000.91 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.2000.90 = INTEGER: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.1000.91 = INTEGER: disabled(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.2000.90 = INTEGER: disabled(2)
DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.1000.91 = INTEGER: active(1)
DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.2000.90 = INTEGER: active(1)
DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.1000.91 = Gauge32: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.2000.90 = Gauge32: 0 seconds
DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.1000.91 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.2000.90 = Gauge32: 0
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.1000.91 = ""
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.2000.90 = ""
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.1000.91 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.2000.90 = STRING: 
DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.1000.91 = Timeticks: 
(1102966) 3:03:49.66
DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.2000.90 = Timeticks: 
(1102799) 3:03:47.99
DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000
DIAL-CONTROL-MIB::callActivePeerAddress.1102966.1 = STRING: 1000
DIAL-CONTROL-MIB::callActivePeerSubAddress.1102799.1 = STRING: 
DIAL-CONTROL-MIB::callActivePeerSubAddress.1102966.1 = STRING: 
DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000
DIAL-CONTROL-MIB::callActivePeerId.1102966.1 = INTEGER: 1000
DIAL-CONTROL-MIB::callActivePeerIfIndex.1102799.1 = INTEGER: 90
DIAL-CONTROL-MIB::callActivePeerIfIndex.1102966.1 = INTEGER: 91
DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102799.1 = INTEGER: 37
DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102966.1 = INTEGER: 0
DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks: 
(1104123) 3:04:01.23
DIAL-CONTROL-MIB::callActiveConnectTime.1102966.1 = Timeticks: 
(1104123) 3:04:01.23
DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4)
DIAL-CONTROL-MIB::callActiveCallState.1102966.1 = INTEGER: active(4)
DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2)
DIAL-CONTROL-MIB::callActiveCallOrigin.1102966.1 = INTEGER: originate(1)
DIAL-CONTROL-MIB::callActiveChargedUnits.1102799.1 = Gauge32: 0
DIAL-CONTROL-MIB::callActiveChargedUnits.1102966.1 = Gauge32: 0
DIAL-CONTROL-MIB::callActiveInfoType.1102799.1 = INTEGER: speech(2)
DIAL-CONTROL-MIB::callActiveInfoType.1102966.1 = INTEGER: speech(2)
DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641
DIAL-CONTROL-MIB::callActiveTransmitPackets.1102966.1 = Gauge32: 7875388
DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782
DIAL-CONTROL-MIB::callActiveTransmitBytes.1102966.1 = Gauge32: 157507741
DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955
DIAL-CONTROL-MIB::callActiveReceivePackets.1102966.1 = Gauge32: 7875641
DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081
DIAL-CONTROL-MIB::callActiveReceiveBytes.1102966.1 = Gauge32: 157512782
DIAL-CONTROL-MIB::callHistoryTableMaxLength.0 = INTEGER: 50
DIAL-CONTROL-MIB::callHistoryRetainTimer.0 = INTEGER: 15 minutes

Información Relacionada

¿Resultó útil este documento?

FeedbackComentarios

Contacte a Cisco