The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Note | Make sure the Serial over Lan (SoL) functionality is enabled on the Cisco Unified Communication System (UCS). To enable SoL on the Cisco UCS server, use the set enabled yes command. For more information on enabling SoL, refer to the Cisco UCS documentation on Cisco.com. |
Java Version 1.6.0.14 must be installed on the client machine used to access your MSE 3365 device.
Step 1 | Download the Cisco MSE ISO image from the Download Software page on cisco.com. |
Step 2 | Open a browser,
and enter the IP address of your device to log in to to the Cisco Integrated
Management Controller (CIMC) GUI interface (Address format is https://x.x.x.x).
|
Step 3 | Click Server and in the Server Summary page, click Launch KVM Console and click OK. A mini executable file is downloaded. |
Step 4 | Open the file using javaws.exe from the bin folder of your Java installation. If a security error prevents you from installing the file, add the URL of the CIMC to the list of exception sites, using the steps below. The installation is initiated. |
Step 5 | In the KVM
Console window that is displayed after the installation, click the
Virtual
Media tab.
|
Step 6 | In the
Virtual
Media window that is displayed, choose
Activate
Virtual Devices > Select "Map CD/DVD. Browse and select the
downloaded MSE image.
|
Step 7 | In the
Select
Install Method window that is displayed, choose any of the
following options:
|
Step 8 | Once the image
is copied, a silent installation is initiated.
|
Step 9 | The device boots
up with the newly loaded image. The CD/DVD mapping is automatically unchecked.
In case it is checked, uncheck the
Activate
Virtual Devices option, so that the BIOS setting is checked for the
image copied on the HDD every time it reboots.
|
Java Version 1.6.0.14 must be installed on the client machine used to access your MSE 3365 device.
Step 1 | Download the Cisco MSE ISO image from the Download Software page on cisco.com. |
Step 2 | Open a browser,
and enter the IP address of your device to log in to to the Cisco Integrated
Management Controller (CIMC) GUI interface (Address format is https://x.x.x.x).
|
Step 3 | Click Server and in the Server Summary page, click Launch KVM Console and click OK. A mini executable file is downloaded. |
Step 4 | Open the file
using javaws.exe from the bin folder of your Java installation. If a security
error prevents you from installing the file, add the URL of the CIMC to the
list of exception sites, using the steps below.
|
Step 5 | In the KVM
Console window that is displayed after the installation, click the
Virtual
Media tab.
|
Step 6 | In the
Virtual
Media window that is displayed, click
Add
Image.
|
Step 7 | Browse and
select the downloaded MSE image and click
Open.
|
Step 8 | During the
recovery process, respond to the prompt to press ENTER by starting an SSH
session to the CIMC interface, as the KVM console does not permit you to press
ENTER (With CSCuw32543). Use the following commands to initiate the SSH
session:
ssh <cimc-ip-address> connect host |
The device boots up with the newly loaded image.