To display configuration
information for a specified wireless LAN or a foreign access point, or to
display wireless LAN summary information, use the
show wlan
command.
show wlan { apgroups | summary | wlan_id | foreignAp | lobby-admin-access}
Syntax Description
apgroups
|
Displays access point group
information.
|
summary
|
Displays a summary of all
wireless LANs.
|
wlan_id
|
Displays the configuration of
a WLAN. The Wireless LAN identifier range is from 1 to 512.
|
foreignAp
|
Displays the configuration
for support of foreign access points.
|
lobby-admin-access
|
Display all wlans that have lobby-admin-access enabled.
|
Usage Guidelines
For 802.1X client security type, which creates the PMK cache, the maximum session timeout that can be set is 86400 seconds
when the session timeout is disabled. For other client security such as open, WebAuth, and PSK for which the PMK cache is
not created, the session timeout value is shown as infinite when session timeout is disabled.
Command History
Release |
Modification |
7.6
|
This command was introduced in a release earlier than Release 7.6.
|
8.4
|
Shows WLANs which have lobby-admin-access enabled.
|
Examples
The following example shows
how to display a summary of wireless LANs for wlan_id 1:
(Cisco Controller) >show wlan 1
WLAN Identifier.................................. 1
Profile Name..................................... aicha
Network Name (SSID).............................. aicha
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
RADIUS Profiling Status ...................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Client Profiling Status ...................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State.............................. Enabled
SNMP-NAC State................................ Enabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... Talwar1
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Enabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Silver (best effort)
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Enabled (Profile 'Controller_Local_EAP')
Radius NAI-Realm................................. Enabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Enabled
FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Enabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
IP Security................................... Disabled
IP Security Passthru.......................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Mobility Anchor List
WLAN ID IP Address Status
------- --------------- ------
802.11u........................................ Enabled
Network Access type............................ Chargeable Public Network
Internet service............................... Enabled
Network Authentication type.................... Not Applicable
HESSID......................................... 00:00:00:00:00:00
IP Address Type Configuration
IPv4 Address type............................ Available
IPv6 Address type............................ Not Known
Roaming Consortium List
Index OUI List In Beacon
----- -------------- ---------
1 313131 Yes
2 DDBBCC No
3 DDDDDD Yes
Realm configuration summary
Realm index.................................. 1
Realm name................................... jobin
EAP index.................................. 1
EAP method................................. Unsupported
Index Inner Authentication Authentication Method
----- -------------------- ---------------------
1 Credential Type SIM
2 Tunneled Eap Credential Type SIM
3 Credential Type SIM
4 Credential Type USIM
5 Credential Type Hardware Token
6 Credential Type SoftToken
Domain name configuration summary
Index Domain name
-------------------
1 rom3
2 ram
3 rom1
Hotspot 2.0.................................... Enabled
Operator name configuration summary
Index Language Operator name
----- -------- -------------
1 ros Robin
Port config summary
Index IP protocol Port number Status
----- ----------- ----------- -------
1 1 0 Closed
2 1 0 Closed
3 1 0 Closed
4 1 0 Closed
5 1 0 Closed
6 1 0 Closed
7 1 0 Closed
WAN Metrics Info
Link status.................................. Up
Symmetric Link............................... No
Downlink speed............................... 4 kbps
Uplink speed................................. 4 kbps
MSAP Services.................................. Disabled
Local Policy
----------------
Priority Policy Name
-------- ---------------
1 Teacher_access_policy
The following example shows
how to display a summary of all WLANs:
(Cisco Controller) >show wlan summary
Number of WLANs.................................. 1
WLAN ID WLAN Profile Name / SSID Status Interface Name PMIPv6 Mobility
------- ------------------------------------- -------- -------------------- ---------------
1 apsso / apsso Disabled management none
The following example shows
how to display the configuration for support of foreign access points:
(Cisco Controller) >show wlan foreignap
Foreign AP support is not enabled.
The following example shows
how to display the AP groups:
(Cisco Controller) >show wlan apgroups
Total Number of AP Groups........................ 1
Site Name........................................ APuser
Site Description................................. <none>
Venue Name....................................... Not configured
Venue Group Code..................................Unspecified
Venue Type Code...................................Unspecified
Language Code.................................... Not configured
AP Operating Class............................... 83,84,112,113,115,116,117,118,123
RF Profile
----------
2.4 GHz band..................................... <none>
5 GHz band....................................... <none>
WLAN ID Interface Network Admission Control Radio Policy
------- ----------- -------------------------- ------------
14 int_4 Disabled All
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
------------------ ----- ------------------- ----------------- ---------------- ---- ------- --------
Ibiza 2 AIR-CAP2602I-A-K9 44:2b:03:9a:8a:73 default location 1 US 1
Larch 2 AIR-CAP3502E-A-K9 f8:66:f2:ab:23:95 default location 1 US 1
Zest 2 AIR-CAP3502I-A-K9 00:22:90:91:6d:b6 ren 1 US 1
Number of Clients................................ 1
MAC Address AP Name Status Device Type
----------------- ------------- ------------- -----------------
24:77:03:89:9b:f8 ap2 Associated Android