Cisco Wireless LAN Controller System Message Guide, Release 7.4
TFTP TOOL TRAPMGR and UPDATE System Messages
Downloads: This chapterpdf (PDF - 90.0KB) The complete bookPDF (PDF - 4.84MB) | Feedback

Table of Contents

TFTP TOOL TRAPMGR and UPDATE System Messages

TFTP Messages

TOOL Messages

TRAPMGR Messages

UPDATE Messages

TFTP TOOL TRAPMGR and UPDATE System Messages

This chapter contains the following topics:

TFTP Messages

This section contains Trivial File Transfer Protocol (TFTP) messages.

Error Message %TFTP-3-FILE_RCV_FAIL: Error while receiving the file. File name: [chars]

Explanation An error has occurred while receiving the file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-FILE_READ_FAIL: Error while reading the local file. File Desc: [dec]

Explanation An error has occurred while reading the local file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-FILE_SND_FAIL: Error while sending the file. File name: [chars]

Explanation An error has occurred while sending the file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-4-FILE_TOO_BIG: FILE is too big. MAX allowed size for this file type is [dec]blocks ([dec] bytes).

Explanation The file is too big.

Recommended Action No action is required.

Error Message %TFTP-3-FILE_WRITE_FAIL: Error while writing [dec] bytes to file. Tftp error.

Explanation An error has occurred while writing to a file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-4-INV_ACK_NUM: Invalid Ack received. The Ack number doesn’t match the request. Send block #[dec], got ACK for #[dec].

Explanation The system has detected an invalid ACK that is received. The ACK number does not match the request.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-INV_COMMAND: Invalid tftp command: ’[chars]’.

Explanation The system has detected an invalid TFTP command.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-INV_OPCODE: Invalid opcode being used by tftp server or data is corrupt. Opcode: [dec]

Explanation The invalid opcode being used by the TFTP server or the data is corrupt.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-INV_STR_TRM: Error while reading internal buffer!. Invalid string termination.

Explanation An error has occurred while reading the internal buffer. An invalid string termination has occurred.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-4-INV_TFTP_MODE: Invalid tftp mode: ’[chars]’. Possible modes are ’binary’, ’octet’ and ’ascii’

Explanation The system has detected an invalid TFTP mode. The possible modes are binary, octet, and ASCII.

Recommended Action No action is required.

Error Message %TFTP-4-RETRY_SOCK_RCV_FAIL: Failed to receive a message through the tftp socket. Retrying to receive data..

Explanation The system has failed to receive a message through the TFTP socket. The system is retrying to receive data.

Recommended Action No action is required.

Error Message %TFTP-3-SOCKET_BIND_FAIL: Failed to bind the socket for tftp. Tftp initialization failed.

Explanation The system has failed to bind the socket for TFTP. TFTP initialization has failed.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-SOCKET_CREATE_FAIL: Failed to create socket for tftp. Tftp initialization failed

Explanation The system has failed to create a socket for TFTP. TFTP initialization has failed.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-SOCK_OPT_FAIL: Failed to configure the socket for tftp. Tftp initialization failed.

Explanation The system has failed to configure the socket for TFTP. TFTP initialization has failed.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-SOCK_RCV_FAIL: Failed to receive a message through the tftp socket.Check network connection and route.Port: [int]

Explanation The system has failed to receive a message through the TFTP socket.

Recommended Action Check the network connection and route.

Error Message %TFTP-3-SOCK_SND_FAIL: Failed to send a message through the tftp socket. Tftp Failure.Dest Port: [int]

Explanation The system has failed to send a message through the TFTP socket.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TFTP-3-SOCK_TIMEOUT: TFTP Timeout no reply from TFTP server.Check network connection and route to the serverTime out between each retry: [dec].

Explanation The TFTP timeout has no reply from the TFTP server.

Recommended Action Check the network connection and route to the server.

Error Message %TFTP-3-TFTP_SVR_ERR: TFTP Server Error: [dec]: "[chars]".

Explanation A TFTP server error has occurred.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

TOOL Messages

This section contains tool subsystem (TOOL) messages.

Error Message %TOOL-3-FILECORUPT: Footer offset ([dec]) past end of file ([dec] bytes)in file [chars]

Explanation The file is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-FILEIMGSIGCORUPT: Error! Invalid image signature in file [chars]

Explanation The file is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-FILEMAP: Error: Unable to map file [chars] :errcode [chars].

Explanation The system has failed to map a file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-FILEOPEN: Error opening filename <[chars]>: [chars].

Explanation The system has failed to open a file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-FILEREADINGPAST: Error! Reading past end of file [chars]! current = [dec] bytes, size= [dec] bytes.

Explanation The file is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-FOOTERMISMATCH: Error! Footer mismatch from header! ([address] != [address].

Explanation The TLV is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-INSTALLTLV: Error [dec] installing TLV.

Explanation An error occurred while installing a TLV.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-SIGLENCORRUP: Error! signature length is corrupted!.

Explanation The signature length is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-SIGTYPCORRUP: Error! Invalid signature type: [hex].

Explanation The signature type is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %TOOL-3-TLVACTIONERR: Error: Invalid TLV action code [dec].

Explanation An improper action was passed upon to \n. The TLV is an invalid action code.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

TRAPMGR Messages

This section contains trap manager (TRAPMGR) messages.

Error Message %TRAPMGR-3-CFG_FILE_WRITE_FAILED: Error on call to osapiFsWrite routine on config file [chars].

Explanation An error has occurred while writing to the configuration file.

Recommended Action No action is required.

Error Message %TRAPMGR-3-DTL_EVENT_PORT_ENTRY: Failed registration for DTL_EVENT_PORT_BSR_TRAP_ENTRY.

Explanation The system has failed the registration for the DTL event port trap entry.

Recommended Action No action is required.

Error Message %TRAPMGR-3-DTL_EVENT_PORT_EXIT: Failed registration for DTL_EVENT_PORT_BSR_TRAP_EXIT.

Explanation The system has failed the registration for the DTL event port trap exit.

Recommended Action No action is required.

UPDATE Messages

This section contains messages related to system updates (UPDATE).

Error Message %UPDATE-2-BINARY_XML: [chars].

Explanation During a binary to XML configuration conversion, either a cfg or xml directory creation or temporary file creation has failed.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-CERT_INST_FAIL: Failed to install Webauth certificate. rc = [dec]

Explanation The system has failed to install a webauth certificate.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-CP_CMD_FAIL: Error while copying webauth files to internal filesystem.

Explanation An error has occurred while copying webauth files to the internal file system.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-EOF_ERR: Error! Reading past end of file! current = [dec] bytes, size= [dec] bytes. File name: [chars]. Failed to install downloaded s/w.

Explanation The system is reading past the end of the file. The system has failed to install the downloaded software.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-FILE_OPEN_FAIL: Filed to open file [chars].

Explanation The system has failed to open a file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-FILE_READ_FAIL: Error reading certificate file <[chars]>: [chars].

Explanation An error has occurred while reading a certificate file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-FILE_REN_FAIL: Unable to Rename file [chars] to [chars]: [chars].

Explanation The system is unable to rename a file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-FILE_WRITE_FAIL: Unable to write to <[chars]>: [chars].

Explanation The system is unable to write to a file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-FOTER_MISMACH: Error! Footer mismatch from header! ([address] != [address]). Failed to install downloaded s/w.

Explanation The footer and the header do not match. The system has failed to install the downloaded software.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-4-GET_PRIORITY_FAIL: Failed to get the priority of the process. Defaulting to 0.Process name: Execute Script

Explanation The system has failed to get the priority of the process. The system is defaulting to the 0.Process name: Execute Script.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-IMAGE_CORRUPT: Invalid data length [hex]. Image file is corrupted!.

Explanation The system has detected an invalid data length. The image file is corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-INCMPLT_READ: Warning: Truncated read: Still [dec] bytes left to read.

Explanation A file read operation did not complete. The file may be corrupt.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-INCMPLT_WRITE: Warning: Truncated write. Error writing chunk size [dec], len left = [dec], total len = [dec].

Explanation The system has detected a truncated write. An error occurred while writing to the file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-INIT_TLV_FAIL: Error [dec] installing Temporal Logic Verifier (TLV). Failed to install downloaded s/w.

Explanation The system has detected an error while installing the Temporal Logic Verifier (TLV). The system has failed to install the downloaded software.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-4-INV_EXT: Warning: Unknown File Type, extension: [chars].

Explanation The system has detected an unknown file extension.

Recommended Action No action is required.

Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.

Explanation The system has detected an invalid image signature. The image may be corrupt.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-INV_FOOTER_OFF: Footer offset ([dec]) past end of file ([dec] bytes). Sanity check failed on downloaded file.

Explanation The footer is offset past the end of the file. A sanity check failed on the downloaded file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-INV_SIGN: Invalid signature type: [hex]. Image file may be corrupted.

Explanation The system has detected an invalid signature type. The image file may be corrupted.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-INV_TLV: Unknown Temporal Logic Verifier (TLV) code [dec] - ignored.

Explanation The system has detected an unknown Temporal Logic Verifier (TLV) code and has ignored it.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-LICENSE_LOAD_FAIL: Failed to load license file [chars]. rc = [dec].

Explanation The system has failed to load the license file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-MEM_MAP_FAIL: Unable to map to a shared file.File name: [chars]. [chars].

Explanation The system is unable to map to a shared file.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-RAMDISK_5MB_FAIL: Error while loading webauth bundle. Could not create ramdisk of 5 MB. File name: [chars]

Explanation An error has occurred while loading a webauth bundle. The system could not create a RAM disk of 5 MB.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-RATE_DISABLE_FAIL: Failed to disable rate limiter in the NPU

Explanation The system has failed to disable a rate limiter in the NPU.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-RATE_ENABLE_FAIL: Failed to enable rate limiter in the NPU

Explanation The system has failed to enable a rate limiter in the NPU.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-RULE_DEL_FAIL: Failed to delete tftp rule for pHost=[chars] pFilename=[chars] rc2 = [dec]

Explanation The system has failed to delete a TFTP rule.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-0-SEM_CREATE_FAIL: Couldn’t create flash access semaphore. Internal system error.

Explanation The system could not create a flash access semaphore.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-SEM_GIVE_FAIL: Failed to unlock the Tftp task. Tftp sub-system malfunctioning.

Explanation The system has failed to unlock the TFTP task. The TFTP subsystem is malfunctioning.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-SEM_TAKE_FAIL: Failed to lock on the Tftp task. Tftp sub-system malfunctioning.

Explanation The system has failed to lock on the TFTP task. The TFTP subsystem is malfunctioning.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-4-SET_PRIORITY_FAIL: Failed to set process priority. Process name: Execute script.

Explanation The system has failed to set the process priority. The process name is Execute script.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-0-TASK_CREATE_FAIL: Failed to create a task. Task Name: XFER_BLINK

Explanation The system has failed to create a task. The task name is XFER_BLINK.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-UNTAR_CMD_FAIL: Error during untar of webauth bundle. Tar returned [dec].

Explanation An error has occurred during an untar of the webauth bundle.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-3-MEM_ALLOC_FAIL: Could not allocate memory for filename. Bytes required [dec].

Explanation The system could not allocate memory for the FTP filename.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message %UPDATE-2-MOUNT_FAILED: [chars][dec].

Explanation The system is unable to mount or unmount the AP image directory (/mnt/images).

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html . With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do , or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Recommended Action