The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following commands are used to configure Application Visibility on the Cisco Mobility Express controller.
Command |
Description |
Added in Release |
---|---|---|
config flexconnect group default-flexgroup avc 1 visibility { enable | disable } |
To enable or disable Application Visibility in a WLAN |
8.1.122.0 |
show flexconnect group detail default-flexgroup |
To display the status of Application Visibility in each WLAN |
8.1.122.0 |
show flexconnect avc statistics group default-flexgroup |
To view Application Visibility statistics based on the flex group |
8.1.122.0 |
how flexconnect avc statistics client client_MAC |
To view Application Visibility statistics based on each client |
8.1.122.0 |
Command |
Description |
Added in Release |
---|---|---|
config 802.11b cleanair enable ap_MAC |
To enable CleanAir on an associated AP. Not applicable to 1850 and 1830 series APs. |
8.1.122.0 |
show 802.11b cleanair device ap ap_MAC |
To list all the interference devices connected to the AP. |
8.1.122.0 |
show 802.11b cleanair device type jammer |
To jam a specific interference device. |
8.1.122.0 |
Command |
Description |
Added in Release |
---|---|---|
config cloud-services server id-token CMX_token |
To specify a valid CMX server token. |
8.3.102.0 |
config cloud-services server url url |
To specify a valid CMX server URL. |
8.3.102.0 |
config cloud-services cmx enable |
To enable CMX analytics. |
8.3.102.0 |
show cloud-services cmx summary |
To view details of the configured CMX cloud services. |
8.3.102.0 |
Command |
Description |
Added in Release |
---|---|---|
|
Use these commands in sequence to collect log, core and crash files. |
8.3.102.0 |
debug transfer all enable |
To debug the code-flow, use this command before the transfer upload start command. |
8.3.102.0 |
debug disable-all |
To disable debugging of the code-flow. |
8.3.102.0 |
Step |
Command |
Description |
Added in Release |
---|---|---|---|
1 |
transfer download ap-images mode cco |
To set the mode of download of software images to be from Cisco.com. |
8.3.102.0 |
2 |
transfer download ap-images cco-username username cco-password password |
To specify the Cisco.com credentials to be used. |
8.3.102.0 |
3 |
transfer download ap-images version { suggested | latest } |
To specify whether the suggested or the latest software version images are to be downloaded. |
8.3.102.0 |
4 |
transfer download ap-images cco-auto-check { enable | disable } |
To set the controller to automatically check for software image updates from Cisco.com. |
8.3.102.0 |
5 |
transfer download start |
To start the download. |
8.3.102.0 |
The following commands are used when performing a Mobility Express controller software image upgrade.
Command |
Description |
Added in Release |
---|---|---|
transfer download ap-images imagePath image_path |
To set the path of the software image on the TFTP server |
8.1.122.0 |
transfer download ap-images mode tftp |
To set the file transfer mode as TFTP |
8.1.122.0 |
transfer download ap-images serverIp ipv4_address |
To specify the IP address of the TFTP server |
8.1.122.0 |
transfer download start |
To save the configuration and start the image download |
8.1.122.0 |
transfer download stop |
To stop the ongoing image download |
8.3.102.0 |
debug transfer all { enable | disable } |
To debug the transfer and download with all sub commands enabled |
8.1.122.0 |
debug transfer tftp { enable | disable } |
To debug transfer download of TFTP |
8.1.122.0 |
debug transfer trace { enable | disable } |
To debug transfer trace |
8.1.122.0 |
Command |
Description |
Added in Release |
---|---|---|
config network dns default | To configure the default DNS servers. |
8.2.100.1 |
show network summary | To view a network summary, with the default DNS servers listed, if they are enabled. |
8.2.100.1 |
The following commands are used for converting an AP from Mobility Express software image to Lightweight CAPWAP AP software image, and vice-versa.
Command |
Description |
Added in Release |
---|---|---|
ap-type capwap |
To convert ap-type from Mobility Express to CAPWAP |
8.1.122.0 |
ap-type mobilityexpress tftp://tftp_server/file_name |
To convert ap-type from CAPWAP to Mobility Express, when running an Mobility Express software image |
8.1.122.0 |
config ap unifiedmode switch_name switch_IP_address |
To convert all APs to type CAPWAP simultaneously from the switch |
8.1.122.0 |
Command |
Description |
Added in Release |
---|---|---|
config ap next-preferred-master cisco_ap_name | To set the next preferred master AP. |
8.3.102.0 |
config ap next-preferred-master cisco_ap_name forced-failover | To set the next preferred master AP and to manually trigger a failover to that AP. |
8.3.102.0 |
Command |
Description |
Added in Release |
---|---|---|
config time ntp server 1 FQDN_of_server | To configure the fully qualified domain name of the NTP server having, for example here, NTP index 1. |
8.2.100.1 |
config time ntp server 2 NTP_Server_IP_address | To configure the IP address of the NTP server having, for example here, NTP index 2. |
8.2.100.1 |
The following Virtual Router Redundancy Protocol (VRRP) commands are used during the Mobility Express controller failover and for the master AP.
Command |
Description |
Added in Release |
---|---|---|
config ap next-preferred-master |
To configure the master AP that has been elected to take over as the new master AP |
8.1.122.0 |
show ap next-preferred-master |
To display the status of the master AP |
8.1.122.0 |
clear ap next-preferred-master |
To clear the configuration of the master AP |
8.1.122.0 |
Command |
Description |
Added in Release |
---|---|---|
config wlan security wpa akm cckm {enable | disable} wlan_id |
To enable or disable CCKM |
8.2.100.1 |