Administration Guide for Cisco Virtualization Experience Client 2111/2211 PCoIP Firmware Release 4.0.2
Device Information Display
Downloads: This chapterpdf (PDF - 1.27MB) The complete bookPDF (PDF - 7.06MB) | Feedback

Device Information Display

Device Information Display

The Information page lets you see details about the device. The Administrative Web Interface shows version, vital product data (VPD), and attached device information. The OSD lets you view the device version information.

Version information display

The Version page allows you to view hardware and firmware version details.

Figure 1. Version Web Page



Figure 2. OSD: Version



Table 1 Version Parameters
Parameter Description
VPD Information

This is vital product information provisioned by the factory to uniquely identify each client.

MAC Address: Client unique MAC address

Unique Identifier: Client unique identifier

Serial Number: Client unique serial number

Firmware Part Number: Part number of the current firmware

Hardware Version: Client hardware version number

Firmware Information

This information reflects the current firmware details.

Firmware Version: Version of the current firmware

Firmware Build ID: Revision code of the current firmware

Firmware Build Date: Build date for the current firmware

PCoIP Processor Revision

The silicon revision of the PCoIP processor. Revision B of the silicon is denoted by a 1.0.

Bootloader Information

This information reflects the current firmware bootloader details:

Bootloader Version: Version of the current bootloader

Bootloader Build ID: Revision code of the current bootloader

Bootloader Build Date: Build date of the current bootloader

Attached devices display

The Attached Devices page lets you see the type and status of the monitor and USB hardware currently attached to the client.

Figure 3. Attached Devices Web Page



Table 2 Attached Devices Page Statistics
Statistic Description
Displays This section displays the model, status, mode, resolution, serial number, vendor identification (VID), product identification (PID), and date of the monitor attached to each port. The first line is for monitor 1. The second line is for monitor 2.
USB Devices This section displays the port mode, model, status, device class, subclass, protocol, vendor identification (VID), and product identification (PID) of the USB device attached to the client.
USB Device Status

The possible status options include:

  • Not Connected: No device is connected.
  • Not in Session: The device is detected outside of a PCoIP session.
  • Not Initialized: The device is detected in a PCoIP session but the virtual machine has not initialized the device.
  • Failed Authorized: The device is detected in a PCoIP session but is not authorized. For more information, see USB permissions example.
  • Locally Connected: The device is detected and authorized but locally terminated in a PCoIP session (for example, a local cursor).
  • Connected: The device is detected and authorized in a PCoIP session.