Hardware Installation Guide (Version 1.0)
About This Guide
Downloads: This chapterpdf (PDF - 119.0KB) The complete bookPDF (PDF - 1.88MB) | Feedback

About this Guide

Table Of Contents

About this Guide

Overview

Audience

Objectives

Organization

Related Documentation

Obtaining Documentation and Submitting a Service Request


About this Guide


Overview

The Cisco VG248 Analog Phone Gateway Hardware Installation Guide provides the information you need to install the Cisco VG248 Analog Phone Gateway (VG248) on your network.

Audience

Network engineers, system administrators, and telecom engineers should review this guide to learn the steps required to properly set up the VG248 in the network.

The tasks described in this guide are considered to be administration-level tasks. Because of the close interaction of the VG248 with Cisco CallManager and analog telephony systems, these tasks require that you are familiar with these systems as well.


Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. (To see translations of the warnings that appear in this publication, refer to the appendix "Translated Safety Warnings.")



Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.


Objectives

This guide provides the required steps to install the VG248. You must use this guide in conjunction with the Cisco VG248 Analog Phone Gateway Software Configuration Guide to get the VG248 up and running on your network.

Because of the complexity of an IP telephony network, this guide does not provide detailed information for required procedures performed on other Cisco or third-party devices. Refer to the documentation provided with these systems for installation and configuration instructions.

Organization

Table 1 provides an overview of the organization of this guide.

Table 1 Cisco Digital PBX Adapter 7630 Administration Guide Organization 

Chapter
Description

Chapter 1, "Overview"

Provides overview of the hardware features and technical specifications of the VG248.

Chapter 2, "Preparing to Install the VG248"

Provides information about preparing the site for installation, required tools, and safety information.

Chapter 3, "Installing the VG248"

Describes the steps required to properly and safely install and configure the VG248 in your network.

Appendix A, "Regulatory Compliance and Technical Specifications"

Provides regulatory compliance and technical specifications for the VG248.

Appendix B, "Translated Safety Warnings"

Provides translations of safety warnings used in this guide.


Related Documentation

For information about Cisco CallManager and additional information about the VG248, refer to these publications:

Cisco VG248 Analog Phone Gateway Software Configuration Guide

Cisco VG248 Analog Phone Gateway Release Notes

Cisco CallManager Administration Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.