Table of Contents
Test Bed 1: Unified CCE with Unified CVP, Local and Remote Agents
Unified CCE with Unified CVP Deployment Model
Cisco Unified Contact Center Enterprise and Cisco Unified Intelligent Contact Management Enterprise
Cisco Unified Customer Voice Portal
Cisco Virtual Office and Cisco AnyConnect VPN client
Cisco Unified Contact Center Enterprise Desktop
Test Bed 1: Unified CCE with Unified CVP, Local and Remote Agents
This Cisco Unified Contact Center Enterprise (Unified CCE) with Cisco Unified Customer Voice Portal (Unified CVP), local and remote agents test bed used to complete testing for the Cisco Collaborative Systems Release 10.5(1), is designed to simulate a medium-sized inbound and outbound contact center with local and remote agents using Unified CCE with Unified CVP for call treatment and queuing and Cisco Unified Communications Manager (Unified CM) for call control.
This test bed is designed to implement and test some of the design considerations and guidelines of:
- Cisco Unified Communications System Release 10.x SRND
- Cisco Unified Contact Center Enterprise Release 10.x Solution Reference Network Design (SRND)
- Cisco Unified Customer Voice Portal Release SRND
For information about how to install and configure these and other Contact Center components, see Components Installation and Configuration Guides at:
Cisco Collaboration Systems for Contact Center Release 10.5(1)
Additional configuration information for contact center call flows and components is available at:
Unified Communications System Implementation
This topic contains the following sections:
Unified CCE with Unified CVP Deployment Model
This Unified CCE with Unified CVP test bed is designed to replicate a 4000 agent inbound and outbound contact center in multiple sites where agents are located locally, as well as in remote sites. It is combined with a general collaboration office deployment on a Unified CM cluster. A SIP-based Unified CVP deployment is used for prompting, collecting and queuing. Agents use SCCP phones, SIP Phones, Cisco Unified IP Phones (69xx, 79xx, 89xx, 894x, 99xx), and video endpoints TelePresence EX 60, and EX 90.
Agents also use Cisco Finesse (Finesse) and CTI OS desktops. Some local and remote agents also use virtualized clients. The entire deployment uses two data centers connected through a high speed WAN for redundancy. All solution components are designed for high availability (HA) wherever possible. The topology and relationships of the Unified CCE with Unified CVP deployment is shown in Figure 1.
Figure 1 Unified CCE with Unified CVP test bed topology
General Deployment Options
The following deployment options were used for this Unified CCE with Unified CVP test bed.
Deployment Model
The deployment is a Clustering over WAN model. In this deployment, the agents are local and connected through LAN/MAN infrastructure to one side of the Unified CCE deployment. The Unified CCE components and Unified CM components are in a secondary data center, which provides redundancy in case disaster recovery is needed. The two data centers are separated by a WAN.
The Clustering over WAN model has the following setup:
- Unified CCE clustering with two links, one for Unified CCE public and Intra-Cluster Communication Signaling (ICCS) traffic and one for Unified CCE private traffic.
- To ensure path diversity, there are separate, dedicated links for Unified CCE private communications between the Unified CCE Central Controllers on Side A and Side B, and between the peripheral gateways on Side A and Side B. Path diversity is required due to the architecture of Unified CCE.
Remote Gateway 2 (3925) ISR G2 has two Services Modules (SM) with Services Ready Engine (SM-SRE-910-K9) loaded with Cisco SRE-V Software 2.0.1.0, with MediaSense primary and secondary nodes installed, which are used to record audio calls using Unified CM-based forking and CUBE-based forking methods.
Cisco Unified Contact Center Enterprise and Cisco Unified Intelligent Contact Management Enterprise
Unified CCE and Unified ICM, integral components of the Cisco Unified Communications System, provide intelligent routing and call treatment with transparent blending of multiple communication channels, while easing the transition from a traditional automatic call distributor (ACD) to an IP-based ACD.
Unified CCE/Unified ICM are part of a strategic platform that helps customers move into the next phase of customer contact, beyond today's contact center to a Customer Interaction Network. The Customer Interaction Network is a distributed, IP-based customer service infrastructure that comprises a continuously evolving suite of innovative, multichannel services and customer-relationship-management (CRM) applications.
Unified CCE/Unified ICM software is deployed at the test sites in the contact center environment. With Unified CCE/Unified ICM, the call center manager can configure agents to handle inbound and outbound voice calls. The agents can switch between these media on a task-by-task basis.
For the latest configuration options for Cisco Collaboration Systems Release 10.5(1), go to http://www.cisco.com/en/US/partner/products/sw/custcosw/ps1844/products_installation_and_configuration_guides_list.html .
Cisco Unified Customer Voice Portal
The Cisco Unified Customer Service Portal (Unified CVP) provides interactive voice response and queuing capabilities in a contact center environment and supports automated speech recognition (ASR) and text-to-speech (TTS) capabilities. Unified CVP is implemented in this test environment in self-service mode, and the comprehensive mode that includes support for agent queuing, multisite call switching, and speech-enabled and touch-tone applications. Customers can use touchtone signals or their own voice to request self-service information. Its components work together to enable you to create and deploy IVR applications that include voice interaction as well as traditional numeric input to provide intelligent, personalized self-service over the phone.
Unified CVP Call Server consists of SIP services and plays media files to the caller and collects information in return. It also interprets messages from Unified ICME and generates VXML documents that it uses to route the call.
Through an operations console, Unified CVP also provides the ability to monitor, manage, and configure all Unified CVP solution components from a central, single operations console.
For additional information about Cisco Unified Customer Service Portal, go to:
http://www.cisco.com/en/US/products/sw/custcosw/ps1006/tsd_products_support_series_home.html.
Cisco Outbound Dialer Option
The Cisco Outbound Option application provides outbound dialing functionality along with the existing inbound capabilities of Unified CCE. This application enables the contact center to dial customers and direct contacted customers to agents or IVRs. The Outbound Option Dialer component, which resides on the peripheral gateway server dials customers using Cisco Unified Communications Manager (Unified CM) and voice gateways, reserves agents via the Media Routing (MR) interface and transfers answered customers calls to reserved agents.
In an Outbound Option deployment that uses the SIP Dialer, functions such as dialing, call control, and Call Progress Analysis for Outbound campaigns are handled by the voice gateway, and not by Unified CM. This increases the number of outbound agents that a deployment can service on a peripheral gateway, and reduces the number of peripheral gateways and dialers customers need to deploy for larger enterprise systems.
For additional information about Cisco Outbound Dialer Option, go to:
http://www.cisco.com/en/US/products/sw/custcosw/ps524/tsd_products_support_series_home.html.
Cisco Mobile Agent
The Cisco Mobile Agent feature enables Unified CCE/Unified ICME to support agents using phones not directly controlled by Unified CM. This could be an agent:
- outside the call center, using an analog phone at home or a cell phone
- inside the call center, using an IP phone connection not controlled by Unified CCE or an associated Unified CM
If you plan to configure a mobile agent to use:
- an analog phone or an Cisco Unified IP Phone (Unified IP Phone) without the Cisco Business Ready Teleworker setup, use the Mobile Agent option
For all support information for Cisco Mobile Agent, go to:
http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps6223/product_data_sheet0900aecd80425476.html.
Cisco MediaSense
Cisco MediaSense (MediaSense) is a SIP-based service that allows other network devices in real-time to monitor customer conversations, including recording, playback, streaming and storing audio and video data, including Video on Hold (VoH) and Video in Queue (ViQ). MediaSense automatically captures and stores every Voice over IP (VoIP) conversation which cross configured Unified Communications Manager IP phones or CUBE devices.
MediaSense is an IP media recording and playback system that implements the Open Recording Architecture open interfaces. MediaSense comprises of many elements to support IP based recording. It solves the topology issues and accelerates the adoption of Cisco Collaboration Systems. It captures, stores, and processes multimedia on a unified network platform, enables contact center supervisors to live monitor conversations and assist agents in resolving caller issues and provides open, standardized hooks for real-time speech analytics, to help customer service representatives assist callers faster and more effectively.
For all support information for Cisco MediaSense, go to:
http://www.cisco.com/en/US/products/ps11389/tsd_products_support_series_home.html.
Cisco Finesse
Finesse is a next-generation agent and supervisor desktop designed to provide a collaborative experience for the various communities that interact with your customer service organization. In this deployment, Finesse is installed on a virtual machine as a primary and secondary node.
Finesse with Cisco Virtualization Experience Media Engine 9.7 (CiscoVXME) was tested with both Citrix Desktop 7.0and with VMware View. Finesse is installed on the Linux-based Cisco Unified Communication Voice Operating System. Primary and secondary Finesse servers are installed on the same site as Unified CCE components. Currently Finesse does not support primary and secondary nodes separated over WAN. Agents can sign on to the Finesse Server from Microsoft Internet Explorer 9.0 or Mozilla Firefox version later than 24, using a laptop or a desktop connected directly to the data center or remotely using Cisco VXC 62xx clients such as VPN using VMware/Citrix View.
Agents sign on to the Finesse server from Microsoft Internet Explorer 9.0 either using a laptop or a desktop unit connected directly to the data center, or remotely using virtual desktop infrastructure (VDI) devices.
For all support information for Cisco Finesse, go to:
http://www.cisco.com/en/US/products/ps11324/tsd_products_support_series_home.html.
Cisco SocialMiner
Cisco SocialMiner (SocialMiner) is a social media customer care solution. SocialMiner can help you proactively respond to customers who communicate through public networks. SocialMiner and Unified CCE work in concert to process the Agent Request (Voice CallBack) from its inception through the receipt of the call back.
The role of SocialMiner in the Agent Request feature:
- Provides a notification mechanism (the Connection to CCE notification type) used to forward callback requests to UCCE via a Media Routing (MR) connection
- Provides the API used by custom applications to initiate a callback
- Forwards the callback details to UCCE
- Provides an API used by custom applications to retrieve the state of the callback, including a field in the GET call that defines the estimated wait time until an agent becomes available that can be communicated to the end user
- Provides an API used by custom applications to cancel a requested callback
Cisco Jabber for Windows
Cisco Jabber for Windows streamline communications and enhances productivity through unified presence, instant messaging, and audio conference into one client on your desktop. Built on open standards, Jabber for Windows integrates with commonly used desktop applications. Jabber for Windows 9.7.1 softphones are installed in data center A, data center B, and remote sites.
For all support information for Cisco Jabber for Windows, go to:
http://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/tsd-products-support-series-home.html.
Cisco Virtual Office and Cisco AnyConnect VPN client
CT IOS and Finesse Agent/phones are connected to the data center through a VPN tunnel.
In the Cisco Virtual Office (CVO) case, the VPN tunnel is established from the head-end VPN Hub router, which is connected to Data Center side A and terminated at a CVO spoke Router (881 and 891 routers), where Agent desktops and phones are connected. In the Cisco AnyConnect Secure Mobility Client case, the VPN tunnel is established from the ASA that is connected to Data Center Side A and terminated at phone models like 79XX, 89XX, and 99XX series, which support the VPN services.
For additional information about Cisco Virtual Office, go to:
http://www.cisco.com/en/US/netsol/ns855/.
For additional information about Cisco Anyconnect VPN client, go to:
http://www.cisco.com/en/US/products/ps8411/tsd_products_support_series_home.html.
Cisco Unified Contact Center Enterprise Desktop
The Cisco Computer Telephony Integration Option (CTI OS) Agent Desktop and the Finesse Agent Desktop are both tested. CTI OS Agent Desktop functionality used during testing includes handling of inbound calls, outbound calls, transfer and conference. Finesse Agent Desktop testing includes handling of inbound calls, transfer and conference.
For all support information for Cisco Unified Contact Center Enterprise Desktop, go to:
http://www.cisco.com/en/US/partner/products/sw/custcosw/ps1844/tsd_products_support_series_home.html.
For all support information for Cisco Computer Telephony Integration Option, go to:
http://www.cisco.com/en/US/partner/products/sw/custcosw/ps14/tsd_products_support_series_home.html.
Cisco Unified Border Element
SIP trunking is used for the Unified CVP deployment with Cisco IOS gateways and Cisco Unified Border Element (CUBE). Stand-alone CUBE is placed in data center A and data center B respectively. From each CUBE a SIP trunk is running on Transmission Control Protocol (TCP) (using VoIP dial-peer) to Unified CVP in data center A and data center B respectively. From Unified CVP, a SIP trunk is running on TCP to CUBE. In addition, from each CUBE (in Data Center A and B), one more SIP trunk is running on User Datagram Protocol (UDP) (using VoIP Dial-peers) on each CUBE to accept the IP calls from IP PSTN Service Provider network.
For further information about Cisco Unified Border Element, go to:
http://www.cisco.com/en/US/products/sw/voicesw/ps5640/tsd_products_support_series_home.html.
Virtualization support
Many components of the solution are running on virtual machines on Cisco Unified Computing System UCS hardware.
For further information about Virtualization Support, go to:
Desktop Virtualization
Cisco Virtualization Experience Media Engine 9.7 (Cisco VXME) is deployed in the data center while The Cisco Virtualization Experience Client (VXC6215) runs on the local client.
The Cisco Virtualization Experience Client (VXC) 6xxx is a thin client that unifies voice, video and virtual desktops in one device. VXC 6xxx clients were deployed both in the data center as well as remote sites. PCoIP and ICA were tested with VXC 6xxx. Some of the remote clients were over VPN. Both CTI OS Agent Desktop and Finesse were tested with these virtualized clients.
For further information about Cisco VXME, go to http://www.cisco.com/c/en/us/products/collaboration-endpoints/virtualization-experience-media-engine/index.html .
For further information about Cisco VXC 6000 Series, go to http://www.cisco.com/c/en/us/products/collaboration-endpoints/virtualization-experience-client-6000-series/index.html .
Conferencing
The Cisco TelePresence Server is an innovative software solution enabling high-quality standards-based conferencing for the mobile or desktop user and the immersive room meeting participant.
Cisco TelePresence Conductor helps ensure simple, reliable, and efficient multiparty telepresence and collaborative conferencing.
Cisco TelePresence MCU 4500 Series (MCU 4501) is a full high-definition multimedia conferencing bridge. MCU 4501 was deployed in the data center and registered to the Unified CM. MCU 4501 was part of the MRGL configured on all phones so that conferencing initiated can allocate a video conference bridge.