Mobile Agent Guide for Cisco Unified Contact Center Enterprise & Hosted Release 9.0(1)
Sample Cisco IOS configuration for analog FXO to PRI gateway
Downloads: This chapterpdf (PDF - 972.0KB) The complete bookPDF (PDF - 3.4MB) | Feedback

Sample Cisco IOS configuration for analog FXO to PRI gateway

Sample Cisco IOS configuration for analog FXO to PRI gateway

The following section provides a sample Cisco IOS configuration for an analog FXO to PRI gateway.

hostname pri-fxo-gateway
!
isdn switch-type primary-ni
!
controller T1 3/0
framing esf
linecode b8zs
cablelength short 133
pri-group timeslots 1-24
!
interface Serial3/0:23
bandwidth 230400
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
!
voice-port 1/0/0
connection plar opx 4085551234
!
voice-port 1/0/1
connection plar opx 4085551235
!
dial-peer cor custom
!
dial-peer voice 1 pots
destination-pattern 4085551234
no digit-strip
port 3/0:23
!
dial-peer voice 100 pots
destination-pattern 4085551235
no digit-strip
port 3/0:23
!
end