Open Control Center PageDevice Center
Choose The status is displayed within five seconds of loading the page.
to open the Control Center page, where you can check the status of each device, and start, stop, or restart devices.The rows on this page contain five columns, with a radio button to the left of each row.
This page always contains at least one row for the Controller.
As soon as you add a device on the Device Configuration page (see Device Configuration), this Control Center page also shows a row for that Cisco Unified Intelligence Center Reporting Server device. Use the FilterSearch feature to narrow the list of names (see Filter).
Field |
Description |
---|---|
Name |
The name of the device. For the Controller, this field is populated by default. For each member, this field shows the name of the device from the Device Management page. Each name is a link; click the name to open the sign in page for that node. Changing the name on this page also changes it on the Device Configuration page. |
Host Address |
The IP address for the device. |
Device Type |
A description of the device (Controller or Member). |
Server Type |
The server type is always Unified Intelligence Center. |
Status |
The current state of the device. Possible values are:
|
Actions from this page
You can access and sign in to a member node.
You can start, shutdown, or restart a device by selecting the radio box for the device and clicking the appropriate button. Buttons are dimmed for operations not supported on the device at that time.
The status of the operation is displayed at the bottom of the page. When starting, stopping, or restarting, a confirmation dialog is displayed to confirm the current action you are performing.
Note |
Start, Shutdown, and Restart refer to the application process running on the server, and not the hardware or operating system. |
To |
Do This |
---|---|
Start |
Start the device. |
Shutdown |
Shut down the device. Respond OK or Cancel to the confirmation message. |
Restart |
Restart the device. |
Sign in to the Reporting application on a member node |
Click the name of the member node to open a sign in page where you can enter your user name and password. |
Refresh drop-down |
You can refresh the status at any time. For example, if the status is unknown, you can change the Refresh for status polling by using the drop down menu on the upper-right of the page and click Go. Refresh options are: No refresh | Once | Every 30 seconds | Every 1 minutes | Every 5 minutes | Every 10 minutes. |