Cisco Unified Contact Center Express Installation and Upgrade Guide, Release 10.0(1)
Server Configuration Table
Downloads: This chapterpdf (PDF - 1.16MB) The complete bookPDF (PDF - 2.26MB) | The complete bookePub (ePub - 175.0KB) | Feedback

Server Configuration Table

Server Configuration Table

Server Configuration Information for Installation


Note


  • You can use the configuration table for saving your entries either on a printed paper or in the PDF document.
  • Be aware that the field values (namely hostname and passwords) that you enter while you are running the installation program are case sensitive.
  • All the fields may not be applicable to your system and network configuration. Unless mentioned otherwise, you can change the values of most fields after the installation using CLI commands.

Attention:

Changes to some of the configuration parameters may result in changes to the licence MAC, and you may have to rehost the Unified CCX license. For information about the configuration parameters, see Unified CCX Licenses.

Table 1 Node Configuration Table

Parameter

Your Entry

Administrator ID

Attention:

You cannot change the original administrator account user ID; you can create additional administrator accounts.

Caution   

Do not create administrator IDs (for CLI access or OS administration) that start with "uccx" or "UCCX", because such IDs conflict with system account names that are used internally within the Unified CCX server.

 

Administrator Password

 

Application User Name

 

Application User Password

 

Country

Note   

The value you enter is used to generate a Certificate Signing Request (CSR) and self-signed certificates.

 

DNS Primary

 

DNS Secondary (optional)

 

Domain

 

Gateway Address

 

Hostname

 

IP Address

 

IP Mask

 

MTU Size

Note   

Use the same Maximum Transmission Unit (MTU) value for all servers in the cluster.

 

NIC Duplex

Note   

This parameter is not displayed if automatic negotiation is used.

 

NIC Speed

Note   

This parameter is not displayed if automatic negotiation is used.

 

NTP Server

 

Security Password

 

SMTP Location

Note   

You must populate this field if you plan to use electronic notification.

 

Organization

Note   

The value you enter is used to generate a CSR.

 

Unit

Note   

The value you enter is used to generate a CSR.

 

Location

 

State

Note   

The value you enter is used to generate a CSR.

 

Country

Note   

The value you enter is used to generate a CSR and self-signed certificates.

 

Time Zone